MPQ7935-AEC1

MPQ7935-AEC1

5.5V, 5-Channel PMIC with Four 1A Buck Converters and a 300mA LDO, I²C, and OTP, AEC-Q100 Qualified

Parameters 概要

Regulated Outputs
5
入力電圧（最小） (V)
2.7
入力電圧 (最大) (V)
5.5
Iout (max) (A)
1
パッケージ（mm）
TLGA-29 (4.5x4.5)
Step-Down DC/DC Controller
0
Step-Down DC/DC Converter
4
Step-Up DC/DC Controller
0
Step-Up DC/DC Converter
0
Internal LDO
1
fsw（最大）（kHz）
2200
Step-Down Converter Current (A)
1, 1, 1, 1
LDO Current (A)
0.3
Vfb (V)
1.15, 1.5, 0.4, 1.8
グレード
Automotive

The MPQ7935-AEC1 is a power management IC (PMIC) that integrates four high-efficiency step-down DC/DC converters, a low-dropout (LDO) regulator, and a flexible logic interface.

The DC/DC converters provide constant-on-time (COT) control for fast transient response. The 2.1MHz fixed switching frequency (f_SW) during continuous conduction mode (CCM) greatly reduces external inductance and capacitance. Full protection features include under-voltage lockout (UVLO), over-current protection (OCP), over-voltage protection (OVP), and thermal shutdown.

The I²C interface and one-time programmable (OTP) memory are featured for application flexibility. The output voltage for buck converters 1 and 4 can be adjusted digitally via configurations or in real time. The power-on and power-off sequence are also configurable.

The output voltage for buck converter 2, buck converter 3, and the LDO can be set via external resistors to allow for simplified BOM management. A single orderable part number can be used, even if multiple PMIC configurations are needed.

The MPQ7935-AEC1 is available in a TLGA-29 (4.5mmx4.5mm) package with an exposed pad. It is available in AEC-Q100 Grade 1.

機能と利点

Designed for Automotive Applications:
- Input Voltage (V_IN) Range from 2.7V to 5.5V
- Junction Temperature (T_J) Rating of -40°C to +125°C
- Available in AEC-Q100 Grade 1
Reduces Board Size and BOM:
- Four 1A Buck Converters
- One 300mA Low-Dropout (LDO) Regulator
- Adjustable Output via Registers for Buck Converters 1 and 4
- Adjustable Soft-Start Time via Registers
- Available in a TLGA-29 (4.5mmx4.5mm) Package
Optimized for EMC/EMI:
- Configurable Forced Pulse-Width Modulation (PWM) Mode
- Adjustable Phase Delay
Additional Features:
- I²C Bus
- One-Time Programmable (OTP) Memory
- Power-On/Off Control
- Power-On Reset (POR) Output
- Flexible Power-On/Off Sequence via OTP (0.5ms/2ms/8ms/16ms Selectable Time Slot)
- Adjustable Output via External Resistors for Buck Converters 2 and 3 and the LDO
- Output Over-Current Protection (OCP) and Over-Voltage Protection (OVP)

入手可能な製品番号

MPQ7935GLWT-xxxx-AEC1-Z MPQ7935GLWT-xxxx-AEC1-P MPQ7935GLWT-0000-AEC1-Z MPQ7935GLWT-0000-AEC1-P

P＆Zの意味

関連商品

EVQ7935-LWT-00A 5.5V, 5-Channel PMIC with 4x 1A Buck Converters, 1x 300mA LDO Evaluation Board, AEC-Q100 Qualified

The EVQ7935-LWT-00A evaluation board is designed to demonstrate the capabilities of the MPQ7935-AEC1, a power management IC (PMIC) that integrates four high-efficiency step-down DC/DC converters, a low-dropout (LDO) regulator, and a flexible logic interface.

Constant-on-time (COT) control in the DC/DC converters provides fast transient response. The 2.1MHz fixed switching frequency (f_SW) during continuous conduction mode (CCM) greatly reduces external inductor and capacitor requirements. Full protection features include under-voltage lockout (UVLO), over-current protection (OCP), over-voltage protection (OVP), and thermal shutdown.

The output voltage (V_OUT) is adjustable via the I²C bus or can be preset by the one-time programmable (OTP) memory. The power-on/off sequence is also configurable via the OTP memory and can be controlled via the I²C bus online.

The EVQ7935-LWT-00A is a fully assembled and tested evaluation board. The MPQ7935-AEC1 is available in a TLGA-29 (4.5mmx4.5mm)package with an exposed pad, and is AECQ100 qualified.

￥7,887.00
+ tax

MPQ7920GRM-AEC1

4個の降圧型コンバータ (2A / 2.5A / 4.5A / 4.5A)および5個のLDO内蔵、I2CおよびMTP経由で柔軟なシステム設定可能、5V、PMIC、AEC-Q100認定