Job Listings

Job Summary: 

Broadly experienced digital design/verification engineer of Mixed Signal ASICs 

A Digital Verification Engineer will be leading verification development infrastructure for complex digital FPGAs/ASICs including to create, maintain and drive verification plan/testcase development.

MPS products include: switching regulators, sensors, motor control, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as notebooks, cell phones, telecom, digital camera, automobile and network equipment. 

Essential Functions: 

• UVM and System Verilog based Digital Verification environment definition and development.
• VIPs standardization, definition, development and documentation.
• Define VIP’s integration into the Project’s Digital Verification environment.
• Digital Verification Metrics definition for RTL and Gate-Level Verification.
• Test Plan definition and development.
• Digital Verification Automation and Scripting.
• Regression’s infrastructure definition, development and management.
• Close interaction with Senior Digital and Analog Designers to develop testplan and/or VIP models.
• Lead and/or assist with digital verification Tasks of multiple projects.
• Review Digital Verification Metrics and Results of multiple projects.
• Define and design Digital Verification Top-Level Tests.
• Analyze and debug test results, code coverage and functional coverage. 
• Digital Verification estimation, planning and scheduling to meet tape-out dates.

Qualifications: 

• PhD/BS/MS in Electrical Engineering with emphasis in Digital Design/VLSI coursework. 
• 5+ years of strong experience in both RTL and Gate-Level Verification.
• Proficient in Digital Verification Industry Languages (UVM, System Verilog) and Standards.

• Proficient Level in DV skills and areas: Constraint random tests, SV assertions, coverage metrics, analog and digital DV modelling, DV test plans, regression analysis and reports, UVM DV Agents (Monitor, Driver, Scoreboard), etc.  

• Solid knowledge and experience working through the entire Digital Design Flow: Specification definition, RTL Verification, Synthesis, P&R, Gate-Level Verification, Power Estimation, ATPG Generation and Simulation, AMS Sims, etc. 
• Knowledge & Use of industry standard ASIC tools/flow for daily work: Digital Simulators, synthesis tools, DFT, LEC, STA, etc.
• Excellent scripting and automation skills using TCL, Python or C/C++.
• Good written/verbal communication skills and strong team work/collaboration. 
• Knowledge/Experience with the following is a plus: 
• Knowledge of power management industry/applications 
• I2C, I3C, SPI, USB, PMBUS
• Embedded designs and/or firmware development
• GITLab, SVN, or equiv version control

Location: 

San Jose, CA

Job Duties: Developing analog and mixed-signal ICs for Power Management Products utilizing leading edge submicron BiCMOS/DMOS technologies. Products to be designed include switching regulators, display drivers, audio amplifiers and power management. ICs for fast-growing portable and non-portable markets such as broadband modems, PDAs, notebooks, cell phones, telecom, fiber optics, digital camera, and network equipment.

Job Requirements:  Master's degree in EE/CE/CS + 2-year experience in the offered position or Hardware Developer 

Job Site: San Jose, CA.

Send resume to: Monolithic Power Systems, Inc. 79 Great Oaks Blvd., San Jose, CA 95119.

Job Summary:

Managing and tracking design engineering milestones, schedules and deliverables. Measuring design execution quality against company’s quality standards and methodology. Enforcing quality compliance on all aspects of product development. 

Essential Functions:

• Program-manage design milestones, schedules and deliverables 
• Track and monitor design procedures and enforce compliance
• Monitor quality standards, i.e. company’s development procedures, ISO standards, AECQ standards
• Track design schedules and progress

Required skills:

• In-depth knowledge of quality compliance and ISO standards
• Experience in program management of engineering teams
• Experience in quality audits
• Experience in ISO standard audits
• Understand engineering development cycles

Qualifications:

• BSEE with 2+ years in program management or quality control 
• Good verbal and written skills
• Well versed in Microsoft Office

Location:

San Jose, California, USA

The CRM Business Administrator will support MPS worldwide sales regions, serving as a point of contact for company-wide CRM application. 

Major Responsibilities:

- Facilitate efforts between CRM users and IT department to provide solutions of business applications;

- Work with CRM users from sales, field application engineers, distributors and representatives to enhance user experience;

- Lead CRM users on CRM testing during the development stage of new features;

- Prepare training materials and train CRM super users;

- Maintain CRM system as a business admin; 

- Supervise and guide CRM users to ensure data integrity;

- Customize dashboard and prepare analytical reports for sales, marketing and executives   

Qualifications:

Bachelor or above 

2+ years CRM systems experience

5+ years combined experience (CRM business admin, Data analyst, or Admin)

Excellent communication and interpersonal skills 

Good problem solving skills

Knowledge of database is a plus

Join a team that ships billions of products a year which are used in everything from consumer electronics and IoT (Internet of Things) to laptops and cars. MPS is transforming power electronics design for electrical vehicles, robots, large battery package, data center, automotive and industrial applications with memory based programmable plug-in-play products.

Job Summary:

The IT Support Engineer will be responsible for providing daily IT supports for Spain and EU users as part of our global IT team. The primary function is help-desk supports to ensure all global IT resources, i.e. Servers, PC, phone and video-con (Zoom) systems, printers, other software systems are on and functioning well. Track issue resolution through ticketing system and escalate to level 2 support when needed. The majority of support is provided in our Barcelona office, with remote supports for users in other EU countries.  

Responsabilities

• Provide in-person support for MPS staff in Barcelona, and remote supports for others in other EU regions by using video conferencing (Zoom) or phone. 
• Assist users with setup, installation, upgrading, configuration, troubleshooting and ongoing usability of PC, printers, Network, VPN, and Windows software 
• Provide timely responses to user and management requests; status updates on such requests need to be provided on a regular basis 
• Follow technical and security policies and procedures to handle any requests 
• Work with vendors to resolve technical problems with hardware and software 
• Escalation of problems when unable to resolve 
• Provide advanced level technical support with the Microsoft suite of products (Windows 10, Office 2016, Exchange Online etc.) 
• Create, manage, document and update trouble tickets as necessary within the company ticketing system (TrackIT) 
• New employee IT orientation training 
• Manage local software licenses and maintain hardware and software inventory 
• Make Active Directory changes as needed (User & Group management) 
• Work within IT security guidelines and rules, adhering to compliance 
• Other duties as assigned 

Minimum requirements 

• BS degree in Computer Science or IT related disciplines  
• 4+ years experience as IT helpdesk staff in IP and cyber-security sensitive environment, ideally high-tech industry. 
• 3+ years hands-on experience with MS Office, Microsoft AD, enterprise-grade Anti-Virus software (Symantec, Trend-Micro, SentinelOne etc. ) 
• 2+ years working experience of Windows Servers, VMWare, Cisco Switch, Palo Alto Network FW, MPLS, ISP, Zoom, 
• Experience with and ability to configure, troubleshoot and resolve complex issues using Windows-based systems 
• Experience performing system administration duties on Windows-based systems and related technologies 
• Ability to remain calm, focused and customer oriented during hectic events Proficient in Microsoft Office and related computer software. 
• Possess superior time management and organizational skills with the ability to coordinate multiple schedules based on individual preference and guidelines 
• Adept to thinking critically and analytically. 
• Excellent verbal and written communication skills

Location: Barcelona City Center, Spain

Job Duties:

Investigate, define and debug analog IC products in DC/DC and AC/DC converters, and white LED drivers; develop application reference circuits and system level power management solutions for portable electronics, computing, networking, automotive and wireless markets; provide application support and technical training for key customers and field application engineers; write datasheets, application notes, and design notes.

Job Requirements:           Master's degree in EE/CE/CS

Job Site:                             San Jose, CA.

Create and own design requirements and datasheets on definition and development of analog IC products in DC/DC power electronics converters, especially in cloud computing power solutions for CPU, GPU, ASIC & SOC; work with customer and field application team to provide total computing power solution; develop application reference circuits and system level power management solution for Server and Clout; provide application support and technical training for key customers and field application engineers; Create architecture, schematics, layout and BOM for evaluation PCB boards; design and configure board level test setups using oscilloscopes, power supplies, power loads, arbitrary waveform generations for power electronics; debug and resolve field IC and PCB failure issues.

Job Requirements:           Master's degree in EE/CE/CS + 2-year experience in the offered position

Job Site:                             San Jose, CA

Job Summary:

MPS is seeking a Sr. Module Design Engineer with magnetic specialty for the power module team. This role is responsible for the development of the highly integrated MPS power module products. In this role, you will design high current, high density DC-DC power modules with cutting-edge monolithic power management ICs, coordinate and lead the power module development from planning through completion.

Essential Functions:

• Define, and design the highly integrated power module solutions.
• Magnetic component simulation, and integration with module product.
• Drive the cross-functional collaboration with the package, test, product and QA team to bring a power module solution from concept to mass production.
• Develop reference circuit schematic and system level power architecture for demonstrating the advantage of cutting edge power module solutions of MPS.
• Validate and characterize new products.
• Provide technical support and training for customers and field application engineer.

Qualifications:

• BS or MS in Electronics/Electrical Engineering.
• 3+ years of hands-on experience with DC/DC power converter design, debug and optimization.
• Familiar with inductor, transformer designs, simulation and manufacture.
• Proficiency with PCB design and simulation tools such as Allegro PCB Editor, Capture CIS, Altium Designer.
• Highly enthusiastic in solving multi-disciplinary challenges in fast paced product-oriented environments.
• Effective priority management skills across multiple tasks.
• Excellent verbal, written and presentation communication skills.

 Location:

San Jose, CA

The Technical Accounting Manager is responsible for:

• Assists with monthly financial statement close, performing or reviewing account balance reconciliations, reviewing the performance of internal controls, etc.),
• Monitoring emerging accounting developments and assessing their impact on the business,
• Internal control management and SOX compliance
• Working with SEC Reporting and Compliance regarding all aspects of the Company’s SEC filings,
• Facilitating forecasting and reporting of stock compensation,
• Developing policy and standardization of accounting practices across the business,

• Technical Accounting – Dedicates resources necessary toward the interpretation of complex accounting and tax rules.
  • Evaluates and ensures financial statements are in compliance with US GAAP
  • Assesses impact of proposed technical standards on MPS reporting practices and develops organizational disciplines necessary to apply standards when enacted.  
  • Remains current with regard to Intl. Financial Reporting Standards (IFRS)
  • Assists with monthly financial statement close, performing or reviewing account balance reconciliations, reviewing the performance of internal controls, etc.).
  • Assists on corporate special projects as necessary
  • Facilitate required SEC filings (10K, 10Q, 8K, Proxy).
  • Communicates procedures and timeline to all contributors (internal and external).  Monitors progress against established timeline.
  • Gathers, organizes and maintain auditable records.         Responds to questions from our auditors during their routine review of SEC filings.
  • Assists with Sarbanes-Oxley compliance as it relates to SEC disclosures.
  • Supports the efforts of the MPS Disclosure Committee.
  • Coordinates activity with financial printers for EDGARization of SEC reports.
  • Gathers management’s response and assists with drafting responses to any SEC Comment Letters received.
• Stock Compensation
  • On a monthly basis, assesses Black-Scholes assumptions and determine stock compensation costs
  • Reconciles all expense pools for year-end reporting purposes
  • Creates support for all necessary disclosures

• CPA
• 7-10 years Audit / SEC experience required
• Worked in a Corporate environment.
• Excellent verbal and written communication skills.
• Excellent organization skills.
• Must be able to multi-task.

Sr. Technical Marketing Engineer – DC-DC

Job Summary:

• This is a position with the technical marketing and application engineering team. Responsible for the definition and development of analog IC and module products for DC-DC power conversion solutions. Job duty includes competition analysis, simulation and bench verification for new product ideas, author product specifications, provide reference designs, evaluate new products, and write datasheets and application notes.

Essential Functions:

• Work with AEs, IC designers, packaging, and field team to define innovative products. 
• Work with customers on system designs with existing products or developing new products.
• Provide application support and technical training for key customers and field application engineers
• Write datasheets, application notes, design notes.

Qualifications:

• MSEE or higher;
• Hands on experience with power electronics hardware implementation and testing;
• Experience with schematic capture and PCB layout tools;
• Experience with EMI/EMC testing and debug is preferred;
• Excellent communication, writing, and presentation skills;

Education:

• MSEE or higher;

Location:

• San Jose, CA

Sr. Technical Marketing Engineer

Job Summary:

 As a Senior Technical Marketing Engineer, you will work with customers, design engineers, sales, field applications, factory applications, and the technical marketing team to define new products and ensure their timely and successful launch into the marketplace. You will expand MPS’s battery management product portfolio by drawing on your in-depth knowledge of DC-DC converters and battery management IP which will strategically grow revenue and increase gross margin. You will provide guidance and training to designers and applications engineers in order to help enable timely and successful product launches with minimal revisions. In addition to completely owning the product definition from concept to production, you will lead the development of key new IP blocks and converter topologies to integrate these technologies into new products. During the product cycle, you will help support existing customers and also help drive new design wins by strategically promoting MPS products and finding new markets. Responsibilities include, but not limited to:

• Strategic vision for next generation DC-DC battery charger converter topologies and IP blocks
• Ownership of new battery charger and associated DC-DC converter IP from product definition stage through production
• Thorough technical analysis of next-generation charger IP including assisting with behavioral simulations and power-train design
• Competitive analysis of existing solutions
• Support customers and the applications team with troubleshooting issues and root-cause analysis
• Direct customer engagement for defining new products and expanding existing business; domestic and some international travel required
• Training of applications and design engineering teams for power converter topologies including best validation testing practices and procedures
• Promotion of the products through advertising, editorials, written articles and other collateral materials (such as data sheets, data books, brochures, selection guides, etc.)

Qualifications:

• BSEE required, MSEE preferred
• Minimum 10 years of experience in systems engineering or technical marketing role within an analog power management/battery management company
• Experience leading the successful launch of power management products from concept to production
• In-depth knowledge of DC-DC converter topologies, battery chargers, inductive and capacitive energy conversion, linear regulators, converter loss mechanisms, and modelling
• Proficiency with simulation tools such as Spice, MATLAB, Cadence, and Simplis
• In-depth understanding of battery charging specifications including USB BC1.2, USB-C, and USB PD is preferred
• Experience in creating/presenting technical/business presentations to executive staff, internal, and/or external customers

Job Summary:

The candidate must have demonstrated success in digital design & verification/infrastructure development for digital FPGAs/ASICs. Other key skills include technical/project leadership, documentation, RTL design knowledge, and backend flow and tools knowledge. The position requires both technical and leadership skills, while working closely with multi-disciplinary groups to drive & design key aspects of ASIC (power management/motor control/audio amplifier) feature set that meets the requirements of products.  Candidate will be expected to lead designer, verification, and be technical focus on one or more device and/or sections.  Candidate will be expected to support pre/post-silicon design validation and support Design/ATE/Application & Systems group. 

MPS products include: switching regulators, sensors, motor control, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as broadband modems, notebooks, cell phones, telecom, fiber optics, digital camera, automobile and network equipment.

Essential Functions:

• Support & develop the chip/digital level architecture and functional blocks
• Provide technical documentation with specifications, block diagrams, and requirements to stakeholders.
• Collaborate & work with departments/stakeholders including for architectures, requirements, and tradeoffs, including Digital/Analog Design, Application/Test Engineering, & Reliability/Operations to resolve design, application, or test issues.
• Develop system and chip level simulation verification techniques and methodology.

• Digital Design (RTL design): ASIC or FPGA from concept to implementation 

• Digital Verification: Development test plans, test benches and automated test cases
• Knowledge and/or responsibility in synthesis, timing closure, and formal verification.
• Create scripting to support design and verification automation
• Estimate and manage time/tasks completion to target schedule

Qualifications:

• PhD/BS/MS in Electrical Engineering with emphasis in Digital Design/VLSI coursework. 
• 10+ years experience in design plus verification of ASIC or FPGA
• Broad & Strong knowledge of ASIC development process and digital design techniques.
• Proficient in standard DV languages (Verilog, SystemVerilog, UVM) and automated regression testcase development, and reporting/tracking coverage metrics.
• Experience with programming, scripting and automation languages(C/C++, shell, Perl, TCL, Python, etc).  
• Solid knowledge and experience working through the entire Digital Design Flow: Specification definition, RTL Verification, Synthesis, P&R, Gate-Level Verification, Power Estimation, ATPG Generation and Simulation, AMS Sims, etc. 
• Excellent Knowledge & Use of industry standard ASIC tools/flow for daily work: Digital Simulators, synthesis tools, DFT, LEC, STA, etc.
• Good written/verbal communication skills and strong team work/collaboration. 

• Experience with the following is highly desired:
• Knowledge of power management architectures/applications, power conversion, motor control, audio amplifier 
• I2C, I3C, SPI, USB, PMBUS, I2S, CANOpen, EtherCAT
• GITLab 

Location:

Barcelona, Spain or Europe 

Job Description:

• ADC (Analog to Digital Converter)/AFE (Analog Front-End) IC market investigation and market strategy development
• Identify market opportunities and potential customers for future ADC/AFE products 
• Assist in new product definition and product roadmap development
• Promote current ADC/AFE products and market penetration 
• Product launch
• Competitive analysis 
• Pricing
• Product promotions: branding, datasheets, tools, web site, shows, training
• Field and customer interaction: providing product, application, and pricing guidance
• Identify and communicate technology gaps

 Qualifications:

. 

• 5+ years’ experience in Marketing / Applications, within an Analog IC Company, ADC/AFE market experience required
• Good understanding and knowledge of the ADC/AFE market and applications
• Excellent communication skills
• Understand product development process from idea to revenue
• BSEE Preferred

Job Description 职位描述：

Global Job Summary: Engineer’s responsibilities include defining and debugging Analog Digital Converter products, developing reference circuits, developing reference driver firmware, developing application software, writing datasheets and application/design notes, and providing application support and technical training. 

该职位的职责包括定义与调试ADC产品，设计参考电路、设计驱动代码、编写上位机实例程序、撰写产品规格书、应用设计手册并且给客户提供技术培训与支持。

1.Work with field applications team and collaborate with technical marketing to define and debug ADC products; 

与现场应用于市场团队合作，收集市场技术信息，定义与调试ADC产品

2.Evaluate new products and generate reports

评估新产品并撰写测试报告

3.Develop application reference circuits、driver firmware and application software

设计新产品的评估板、驱动及应用程序

4.Write datasheets, application notes, design notes

撰写产品规格书及应用手册

5.Develop and simulate circuits according to requirements, Provide application support and technical training for key customers

根据客户需求设计及仿真电路，提供技术支持与培训

任职要求：

1. Bachelor degree or above in electronics 、communication or related field of study;

本科学历及以上，电子或通信等相关专业

2.Solid knowledge of Analog Digital Converter, Operational amplifier、analog circuit, digital signal processing, Signal and system 

精通模拟数字转换器、运算放大器、模拟电路、数字信号处理、信号与系统等相关理论知识

3.Solid knowledge of ADC driver circuit, Ability to analyze  and develop complex analog circuit. Experience with related simulation software ,Ltspice Pspice.

精通ADC前端驱动电路的设计，复杂模拟电路设计分析能力，熟悉相关的电路仿真软件，如：Ltspice、Pspice等。

4.Experience with Matlab software, signal FFT analysis using Matlab software

精通MATLAB软件，能够使用MATLAB软件进行信号FFT分析等。

5.Knowledge of visual Studio and C# is a plus

具有Visual Studio软件开发者优先

6.Knowledge of visual Studio or related software is a plus

熟练使用Labview或相关仪器控制软件者优先

7.Familiar with communication protocols (i.e. I2C, SPI, UART, etc); developing driver of related interface using FPGA or MCU.

熟悉通信协议（如 I2C, SPI, UART等）,使用FPGA 或者MCU开发相关口的驱动。

Job Summary:

The Business Development Manager is responsible for creating new business and growing revenue for the motor driver product line, working closely with China field application and regional sales team to drive new business in China market. 

Responsibilities:

• Identify and manage new motor driver business opportunities at existing and new accounts  
• Guide customers through the development cycle from design-in to production
• Manage the design-in process and have intimate knowledge of the key decision makers, next actions, and requirements to win the design. 
• Collaborate with field sales to identify appropriate contacts in customer organizations
• Provide regular training for field application and sales engineers 
• Consolidate customer feedback and provide input to product roadmap

Qualifications:

• 7+ years’ experience in IC solution business development, field application support or sales
• Previous experience in motor driver business preferred 
• Ability to convert market and technology trends into business opportunities
• Demonstrate strong communication skills
• Fluent oral and written communication in English
• Willing to travel to customers in China
• Self-motivated and organized
• Automotive account knowledge is preferred

Education:

• BSEE or higher

Job Summary:

The Business Development Manager is responsible for creating new business and growing revenue for the motor driver product line, working closely with China field application and regional sales team to drive new business in China market. 

Responsibilities:

• Identify and manage new motor driver business opportunities at existing and new accounts  
• Guide customers through the development cycle from design-in to production
• Manage the design-in process and have intimate knowledge of the key decision makers, next actions, and requirements to win the design. 
• Collaborate with field sales to identify appropriate contacts in customer organizations
• Provide regular training for field application and sales engineers 
• Consolidate customer feedback and provide input to product roadmap

Qualifications:

• 7+ years’ experience in IC solution business development, field application support or sales
• Previous experience in motor driver business preferred 
• Ability to convert market and technology trends into business opportunities
• Demonstrate strong communication skills
• Fluent oral and written communication in English
• Willing to travel to customers in China
• Self-motivated and organized
• Automotive account knowledge is preferred

Education:

• BSEE or higher

MPS is looking for a Accounting temp to help with the following below. Location is Kirkland, WA.

AP Assistance

IT SOX Testing 

Accounting / Reconciliations  

SOX Narrative update and clean up 

Credit Review Template Updates 

Analysis of Spending (Travel, Cell Phone, Utilities etc..areas we can find savings)

Special Projects 

Development Operations Engineer

Overview:

The IT DevOps Engineer, will join a dynamic and growing Global IT organization located in Kirkland, Washington with global support responsibilities particularly in Asia Pacific. Located in Kirkland, WA, the IT DevOps Engineer will be responsible to carry out automation and optimization tasks to better upkeep all IT Infrastructure systems and services both in-house and in cloud.

Job Responsibilities:

• Working with configuration tools in Linux - Terraform, Ansible to implement monitoring, alerting and reporting in the hybrid cloud infrastructure to upkeep and improve IT Infrastructure robustness and performance.  

• Constantly evaluate new IT Infrastructure automation and monitoring tools to help adopt the right ones to better manage the production services and meet the IT Infrastructure SLA requirements
• Maintain and improve code analysis, build, documentation, and release tools
• Closely work with IT System Engineers for Servers, Network, Storage and IT Security Engineers, to identify, plan, execute and manage IT Infrastructure Automation tasks well. 
• Integrate code analysis and quality metrics tools to provide unified and timely monitoring and alerts on IT Infrastructure performance to related IT staff. 
• Customize our continuous integration system to work with a growing team
• Improve integration between version control, build and incident tracking tools
• Collaborate with the team to improve overall build process reliability and scalability
• Upgrade, maintain current production deployment systems
• Provide ongoing support, needed documentation for the code development lifecycle
• Solve complex technical issues involving multiple technology stacks

Qualifications:

• Proficient with Git, continuous integration, and multiplatform development environments, strong knowledge of secure source control management
• Familiar with static analysis and code coverage tools
• Dedicated to optimizing full cycle engineering development pipelines

• 2+ years of Azure experience
• 5+ years of experience in developing and maintaining build tools and processes for engineering teams of 15 or more, preferably in IT Infrastructure automation and support environment.
• Experience with developing, operating, and maintaining critical workloads
• Experience with IT Infrastructure systems in Servers, Network and Storage systems and cloud technologies, cloud infrastructure and applications
• Experience with infrastructure-as-code methods and technologies
• Experience with compute including server, container, and serverless
• Experience with CI/CD and other automation
• Experience collaborating across multiple functions and teams

• Bachelor’s degree or above in Computer Science or related field

Location: Kirkland, WA/San Jose, CA

Customer Service Representative

Position Overview          

The customer service representative performs a variety of customer and sales support functions, interfaces with sales teams, production planning; regional CSR’s and order management teams and various other departments within the company.

Responsibilities include, but not limited to:

• Customer Service/Global account management, Work in partnership with outside sales teams to proactively monitor Forecast, booking and shipment data to meet customer demand schedules.
• Handle expedite requests from distribution/manufacturing reps and customers, working with production planning teams and cross regional Sales/customer service teams in accordance with customer requirements and manufacturing capabilities. Follow pre-determined escalation path.
• Communicate product information, order and inventory status and manage quotes in a fast paced environment to drive bookings.
• Work with our accounts payable staff to monitor delinquent invoices.
• Provide timely and accurate responses to customers, manufacturer’s representatives, distributors, and outside sales teams
• Support the VP of Sales & Marketing, Director of North America Sales, Director of Sales Operations, Customer Service Manager, Regional and Area Sales managers in areas of reporting, forecasting/sales analysis and general customer related issues.
• Forecast entry
• Keep CRM data accurate and provide ad hoc reports.
• Coordinate/follow up on the bi-annual stock rotation

Minimum Qualifications:

• Strong interpersonal, communication and leadership skills
• Flexibility to change in a highly dynamic/challenging work environment
• Outstanding organizational skills, ability to prioritize, and multi-task
• Ambitious, driven, dedicated, and willing to learn with a strong dream for team success
• Excellent problem-solving and analytical skills
• Advanced computer skills in Microsoft Office. Experience with Pivot tables and Vlookup functions.
• Ability demonstrate a technical aptitude to learn new software tools

Location: San Jose, CA or Kirkland, WA

Corporate Counsel

Seeking corporate counsel to join small in-house legal team that values work-life balance at a publicly traded hardware technology company.

Primary Responsibilities: 

 GOVERNANCE AND COMPLIANCE

• Assist with corporate governance matters including board minutes, policies and training.  
• Assist with employment matters.
• Assist in preparing public company SEC filings and corporate secretary functions: timely and accurate 10-Ks, 10-Qs, proxy statements, etc. 
• Assist with any merger, acquisition or other corporate transactions.
• Support subsidiaries worldwide. 
• Provide strategic legal support to sales, finance, operations, engineering and other internal groups across the company. 
• Provide support to outside counsel on litigation matters.

COMMERCIAL CONTRACTS   

• Engage in contract negotiations with channel partners, suppliers and end customers. 
• Responsibility extends to support of international sales and territory-specific versions of sales and support contracts. 

Experience and Skill Requirements:

• Law degree with excellent academic credentials.
• Minimum of two years of corporate legal experience at a top tier law firm or in-house.   
• Candidate must be willing to roll up sleeves and be hands on with little or no administrative support.  Some tasks will be similar to paralegal duties. 
• Excellent oral and written communication skills, as well as excellent interpersonal skills desired. Candidate also needs to be able to handle challenging interpersonal or multi-cultural situations.  
• Be able to supervise and train junior legal staff.
• Must be a fast learner.
• Must be organized and able to work independently.
• Must be willing to travel occasionally 

Desired Experience:

• ’33 and’34 Act disclosure and reporting
• Drafting, reviewing and negotiating commercial and licensing contracts, including negotiating with sophisticated, nationally recognized companies
• Corporate governance matters, such as board minutes and subsidiary compliance
• Data privacy law (i.e. GDPR)

Location: San Jose, CA

Product Marketing Manager (PMM)

Job Summary:

 MPS is seeking a self-motivated individual who will help to drive our new product execution, solution marketing, and business strategy for our high power/isolated products.  This individual will work closely with Field & Factory Application Engineers, sales teams, and customers, including Tier 1 and OEMs, who are primarily located in the Detroit, Michigan area. This role includes strategic involvement with product line roadmap planning, product definition, solution promotion and positioning to drive new business opportunities and design-in/design win activity management. It also includes performing market and competitive analysis, pricing strategy, opportunity projections, and forecasting.

Essential Functions:

• Customer interaction/visits
• Solution marketing 
• Driving and strategizing new business opportunities
• Work with sales and PL teams to close design-ins/wins
• Market/Competitive analysis
• Pricing
• Opportunity projection
• Forecasting
• Troubleshooting issues and problems
• Q & A from the field and customers

Qualifications:

• Background in isolated IC power products (isolated gate drivers, digital signal isolator, and isolated power),
• Background in IC solution selling for EVs/HEV Applications, including on-board chargers and DCDC converters
• HEV/EV Systems applications and automotive OEM/Tier 1 relationship experience is a plus
• Excellent verbal and written communication skills
• Ability to thrive in an extremely fast-paced, start-up environment.
• BSEE or equivalent required

Location:

Detroit, Michigan 

Job Summary: 

A Sr. Digital Design Engineer leads the end-to-end design and development of digital and mixed-signal ICs utilizing leading edge technologies with industry standard ASIC tools. Products to be designed/verified may include power management, signal management and mixed signal functions. 

MPS products include: switching regulators, sensors, motor control, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as notebooks, cell phones, telecom, digital camera, automobile and network equipment. 

Essential Functions: 

• Digital Architecture Definition and Documentation. 

• RTL Design, debugging and Verification. 

• Verification metrics analysis. 

• IP Definition, Development, Integration and Verification. 

• Synthesis: timing, input/output and DFT constraints definition. Results and Reports analysis. 

• LEC: constraints definition and debugging. Results and Reports analysis. 

• P&R support with MMMC definition and debugging. 

• DFT Implementation, debugging and reports analysis. 

• ATPG Generation and Simulation. 

• Gate-Level Verification. 

• Power Simulations and Analysis. 

• Timing Analysis and Sign-off. 

• AMS Verification support. 

• Post-Silicon Validation support. 

• Close interaction with other Departments for Product definition. 

Qualifications: 

• BSEE + 8 years of experience, MSEE + 5 years of experience in digital ASIC design. 

• Has the ability to work independently and collaborate with other teams or departments. 

• Solid knowledge of the full ASIC development process. 

• Excellent RTL Verilog or System Verilog coding skills. 

• Knowledge of standard Digital Verification languages (System Verilog, UVM) and metrics. 

• Very good understanding of the backend flow: Synthesis, P&R, DFT, Power, LEC and STA. 

• Excellent written/verbal communication skills and strong team work/collaboration. 

• Knowledge/Experience with the following is a plus: 

      o Automotive standards 

      o Embedded designs and/or firmware development 

      o Knowledge of power management industry/applications 

      o I2C, I3C, SPI, USB, PMBUS 

      o FPGA design and validation 

      o ARM designs 

      o Scripting and automation languages like TCL, Python and C/C++ 

Location: Barcelona, Spain

IT Data & Integration Engineer

Overview

As part of the Data & Integration team, this role is focused on integrating multiple IT systems and/or data per business needs across MPS global operations. This role will work very closely with IT team and business users to select, develop and support EDI/other integration platforms, and focus on automating/integrating workflows, data modeling/reporting and analytics to improve business operations efficiency. Additionally, this role is to support sub-modules of other IT systems (i.e. ERP/SCM etc.) as backup IT admin, and help enable new technology solutions. 

Major Responsibilities 

• Analyze business pain-points to identify and specify data and/or system integration needs
• Partner with engineers and business stakeholders from various teams to build data insights and help them to achieve their business goals
• Design/specify workflow/data integration architecture, prototypes, manage production roll-out using proven technologies and system integration methodologies. 
• Participate in code and design reviews to maintain our high development standards
• Collect data from various IT systems and convert it into a single source of truth for all domains and functions
• Build out, maintain and enforce the data models and standardized naming conventions
• Track and observe all data flows and data quality coming from across the source IT systems for business critical reporting

Qualifications 

• This role requires a person skilled in working with diverse technology platforms, architecture and processes across business functions.
• Seasoned in large-scale data warehousing architecture and data modeling for business driven Data & Analytics 
• Proven skills in building high-quality end-to-end data solutions in an agile environment from requirements to production
• 5+ years hands-on technical expertise in IT software system integration technologies, programming, EDI, DevOps, and system integration project management
• Hands-on skills in Oracle and/or MS SQL DB and application level integration, programing and the ability to quickly diagnose and solve system integration problems
• Hands-skills in batch jobs and shell scrips for automation tasks.
• Familiarity with Windows and Linux operation systems, corporate IT experience desired. 
• Working skills in multi-tier software architectures, relational DB and Web applications
• Bsc in computer science or related technical field

Manager, IT CRM & MS Dynamics- Kirkland, WA 

Overview:

The IT CRM Manager is the technical leader for the MS Dynamics CRM, related CPQ/Pricing and related Enterprise Data Management systems/program. This role is to ensure that IT is properly aligned as an enabler of MPS’s continued rapid-growth while driving configuration over customization, efficient data/system integration, and strategically-planned progressive enhancements with Customer Advocacy/Care/Analytics and Security in mind.

Major Responsibilities:

This position will report to Sr. Manager, IT Business Applications.

• Partner with key business stakeholders in understanding business process and data needs and setting the overall direction and priorities of MPS Sales and Customer Advocacy requirements.
• Provide functional and technical leadership for MS Dynamics and related environments.
• Collaborate with key IT stakeholders to ensure overall CRM and related systems health.
• Lead CRM related projects through full-life-cycle.
• Work with other IT staff to integrate MS Dynamics with other key Applications.
• Identify continuous improvement opportunities and collaborate with others to define appropriate approach and deliver results.
• Ensure CRM related applications meet security and audit requirements.
• Leverage strong analytical and problem-solving skills to solve business problems.
• Manage the performance of direct reports by defining accountabilities, establishing performance objectives, providing feedback and guidance, and ensuring that all policies are understood and followed.
• Performs other duties as directed.

Qualifications:

• Bsc in Computer Science or a related discipline.
• 5 to 10 years of in-depth application experience with MS Dynamics, and/or other CRM systems such as Salesforce Sales, Service Cloud
• Advanced Administrator, Consulting and/or Developer Certifications or commensurate experience required.
• Experience leading large scale successful CRM implementations and supports for global technology companies.
• Agile and/or Waterfall project management experience a must, certifications preferred.
• Expert in application/solution design, configuration / system setup and documentation.
• Strong management experience along with excellent verbal and written communication skills.
• Ability to thrive in a matrixed environment and adjust to changing priorities and participation in multiple projects.
• Deep experience with lead to opportunity business process, sales force automation, quotation management and workflow design.
• Data analytics and SQL skills required.
• Demonstrated ability to communicate with multiple levels of management and collaborate with a variety of individuals to achieve business results.
• Experience overseeing complex integrations preferred.

IT Systems Engineer 

The Systems Engineer’s role is to ensure proper computer operation so that end users can accomplish business tasks. This includes receiving, prioritizing, documenting and actively resolving end user help requests and escalating incidents when considered appropriate and necessary to maintain SLA expectations. Can prioritize mission critical tasks and coordinate the construction and expansion of our systems so updates and other maintenance tasks don’t get in the way of daily operations.

Operational Management

• Field incoming requests to the Service Desk via both telephone and e-mail to ensure courteous, timely and effective resolution of end user issues.
• Document all pertinent end user identification information, including name, department, contact information and nature of problem or issue.
• Build rapport and elicit problem details from service desk customers.
• Prioritize and schedule problems. Escalate problem (when required) to the appropriately experienced staff.
• Record, track and document the service desk request problem-solving process, including all successful and unsuccessful decisions made, and actions taken, through to final resolution.
• Apply diagnostic utilities to aid in troubleshooting.
• Access software updates, drivers, knowledge bases, and FAQ resources on the Internet/Intranet to aid in problem resolution.
• Identify and learn appropriate software and hardware used and supported by the organization.
• Perform hands-on fixes at the desktop level, including installing and upgrading software, installing hardware, implementing file backups, and configuring systems and applications.
• Install anti-virus software and ensure virus definitions are up-to-date.
• Perform preventative maintenance, including checking and cleaning of workstations, printers, and peripherals.
• Test fixes to ensure problem has been adequately resolved.
• Perform post-resolution follow ups to help requests.
• Develop help sheets and FAQ lists for end users.
• Reinforce SLAs to manage end-user expectations.
• Manage Globalize VoIP and Online Conferencing, like Zoom

Formal Education & Certification

• College diploma or university degree in the field of computer.
• 7+ years’ experience in system engineering and IT support required.
• Certifications in Microsoft O365 fundamental
• Exceptional server virtualization skills and knowledge.

Knowledge & Experience

• Knowledge of basic computer hardware, including HP and Microsoft.
• Experience with desktop and server operating systems, including MS Windows.
• Extensive application support experience with Microsoft Office, Outlook.
• Experience with desktop and server operating systems, including Windows and MacOS.  
• Exceptional written and oral communication skills.
• Exceptional interpersonal skills, with a focus on rapport-building, listening and questioning skills.
• Strong documentation skills.
• Excellent English communication skills

Personal Attributes

• Ability to conduct research into a wide range of computing issues as required.
• Ability to absorb and retain information quickly.
• Ability to present ideas in user-friendly language.
• Highly self-motivated and directed.
• Keen attention to detail.
• Proven analytical and problem-solving abilities.
• Ability to effectively prioritize and execute tasks in a high-pressure environment.
• Exceptional customer service orientation.
• Experience working in a team-oriented, collaborative environment.

Job Summary:

This position’s responsibilities include enhancing and debugging analog and digital IC products, developing reference circuits, writing datasheets and application/design notes, and providing application support for computing customers.

Essential functions:

• Work with design engineers, field applications team, and marketing to enhance and debug analog and digital IC products.
• Develop application reference circuits.
• Write datasheets, application notes, design notes. 
• Provide application support for key customers and field application engineers

Qualifications:

• Fluent communication skills in English
• Excellent writing and presentation skills
• Previous experience in computing system power design or power management IC company desired

Requirement:

• 2+ years of hands-on experience in switch mode power designs including DC/DC, AC/DC, or inverters.
• MSEE or higher required

Location:

Taiwan

Job Summary:

This position’s responsibilities include enhancing and debugging analog and digital IC products, developing reference circuits, writing datasheets and application/design notes, and providing application support for computing customers.

Essential functions:

• Work with design engineers, field applications team, and marketing to enhance and debug analog and digital IC products.
• Develop application reference circuits.
• Write datasheets, application notes, design notes. 
• Provide application support for key customers and field application engineers

Qualifications:

• Fluent communication skills in English
• Excellent writing and presentation skills
• Previous experience in SI/PI analysis, computing system power design, power supply manufacturer, or power management IC company desired

Requirement:

• 4+ years of hands-on experience in switch mode power designs including DC/DC, AC/DC, or inverters.
• MSEE or higher required

Location:

Taiwan

MPS is seeking a highly self-motivated professional to work in our automotive product line. 

Essential Functions: 

• Develop reference design for automotive application with especially interest to cost, and EMC.

• Develop custom PCB using our solution for worldwide customer and evaluate its performance on EMC, efficiency and heat dissipation. 

• Define specification and support the development of new products for automotive product line 

• Test and qualify new parts according the requirement of the part. 

• Become EMC expert at Barcelona office, understand and perform all EMC measures. 

• Write technical articles, datasheet and application notes to support client and MPS’s sales team 

Qualifications: 

• BS in related engineering field (MS preferred) + 2-3 years of industry experience in automotive electronics 

• Solid understanding of power electronics circuits 

• Experience with PCB design (at least one year). 

• Good knowledge on EMC measures and test will be a plus. 

• Oral / written proficiency in English 

• Excellent communication, interpersonal and organizational skills 

Location: 

• Barcelona, Spain

Principal Applications Engineer

Job Summary:

• This is a senior level position in application/system engineering.
• Responsibilities include defining analog IC and module products, developing and debugging reference circuits internally and with strategic customers, writing datasheets and application/design notes, and providing application support and technical training.

Essential Functions:

• Work with design engineers, field applications team, and marketing to define analog IC products in DC/DC converters, specifically in cloud computing power solutions for CPU, GPU, ASIC, and SOC.
• Define and design 48V DC/DC module products, including isolated and non-isolated topologies.
• Work with customer and field application team to provide total computing power solution.
• Develop application reference circuits and system level power management solutions for Server and Cloud.
• Write datasheets, application notes, design notes and papers in magazines and conferences to promote MPS products.

Qualifications/ Requirements:

• 8+ years of hand-on experience in switch mode power supply designs especially in multi-phase core power design or isolated topology.
• Self-motivated and can-do attitude.
• Previous work experience in a plus.
• Fluent communication skills in English.
• Excellent writing and presentation skills.
• Prior experience in defining power management IC or power modules are highly preferred.

Education:

• MSEE or higher required

Location:

San Jose, CA

Sr. Marketing Manager (ADC)

Job Description:

• ADC (Analog to Digital Converter)/AFE (Analog Front-End) IC market investigation and market strategy development
• Identify market opportunities and potential customers for future ADC/AFE products 
• Assist in new product definition and product roadmap development
• Promote current ADC/AFE products and market penetration 
• Product launch
• Competitive analysis 
• Pricing
• Product promotions: branding, datasheets, tools, web site, shows, training
• Field and customer interaction: providing product, application, and pricing guidance
• Identify and communicate technology gaps

 Qualifications:

. 

• 5+ years’ experience in Marketing / Applications, within an Analog IC Company, ADC/AFE market experience required
• Good understanding and knowledge of the ADC/AFE market and applications
• Excellent communication skills
• Understand product development process from idea to revenue
• BSEE Preferred

MPS is looking for a Senior Digital Design Engineer to join the Automotive BMS Product Line, focused on solving customers’ challenges in Electric Vehicles (EVs) and doing our part to ensure a sustainable/greener tomorrow.

As a part of the team, you will be focused on digital design with the ability to collaborate on the product’s definition, testability, and end applications robustness.  This is a great opportunity where your success is only limited by your creativity.  

Responsibilities

• Leads block level digital circuit design and IP integration including, but not limited to, SPI, I2C, UART, DSP blocks, ADC’s and DAC’s, as well as custom state machines
• Proficient in digital synthesis, timing closure, and automated regression testcase development and report/tracking coverage metrics.
• Create scripting to support design and verification automation.
• Verify post silicon behavior with using scripting and automation languages.
• Collaborate with technical marketing engineers (TME) to prepare datasheets, EC Table specifications.
• Assists ATE (CP/FT) development with design-for-test methods
• Estimate and manage time/tasks completion to target schedule

Preferred Qualifications

• Requires BSEE/MSEE or Equivalent
• 5+ years’ experience within digital design plus verification
• Strong knowledge in low power design techniques and architectures
• Design experience with ARM architectures (Nice to Have, Not Required)
• Experience in Functional Safety (Nice to Have, Not Required)
• Self-motivated with attention to detail
• Strong analytical and problem-solving skills with ability to think outside the block
• Ability to work effectively in a dynamic environment

Location

Chandler, AZ

MPS is looking for a Senior Analog Design Engineer to join the Automotive BMS Product Line, focused on solving customers’ challenges in Electric Vehicles (EVs) and doing our part to ensure a sustainable/greener tomorrow.

As a part of the team, you will be focused on block level analog design with the ability to collaborate on the product’s definition, testability, and end applications robustness.  This is a great opportunity where your success is only limited by your creativity.  

Responsibilities

• Lead block level analog circuit design and integration of strategic IP including, but not limited to, SAR and Sigma Delta ADC’s, precision bandgap references, and low power oscillators.
• Actively participates in the entire product development cycle, from product definition to product introduction
• Provide guidance to layout engineers on critical analog implementation aspects, monitors progress of layouts, and closes the loop with post layout extraction and simulation.
• Work with a team of engineers to evaluate intended product behavior pre tape-out and post tape-out.
• Collaborate with technical marketing engineers (TME) to prepare datasheets, EC Table specifications.
• Assists ATE (CP/FT) development with design-for-test method
• Estimate and manage time/tasks completion to target schedule

Preferred Qualification

• Requires BSEE/MSEE or Equivalent
• 5+ years’ experience with analog design 
• Strong knowledge of low power design techniques and architectures
• Experience in Functional Safety (Nice to Have, Not Required)
• Self-motivated with attention to detail
• Strong analytical and problem-solving skills with ability to think outside the block
• Ability to work effectively in a dynamic environment

Location

Chandler, AZ

Technical Marketing Manager

Job Summary:

 As a Technical Marketing Manager, you will lead a sub product line within the battery management organization at MPS. You will work with customers, design engineers, sales, field applications and factory applications to define new products in the roadmap and ensure their timely and successful launch into the marketplace. You will expand MPS’s battery management product portfolio by drawing on your in-depth knowledge of Lithium battery technology to define new battery pack monitoring, protection, and fuel gauge products which will strategically grow revenue and increase gross margin. You will provide guidance and training to designers and applications engineers in order to help enable timely and successful product launches with minimal revisions. During the product cycle, you will help support existing customers and also help drive new design wins by strategically promoting MPS products and finding new markets. Responsibilities include, but not limited to:

• Strategic vision for next generation battery monitoring, protection, fuel gauging roadmap, and product definition
• Ownership of BMS and fuel gauging IP from product definition stage through production
• Competitive analysis
• Support customers and the applications team with troubleshooting issues and problems
• Direct customer engagement for defining new products and expanding existing business; domestic and some international travel required
• Training of applications engineering teams for fuel gauging products including best validation testing practices and procedures
• Promotion of the products through advertising, editorials, written articles and other collateral materials (such as data sheets, data books, brochures, selection guides, etc.)

Qualifications:

• BSEE required, MSEE preferred
• Minimum 10 years experience in technical marketing / systems engineering within an analog power management/battery management Company
• In-depth knowledge of lithium-ion and lithium polymer battery modelling and characterization methods
• Experience with simulation tools such as Spice, MATLAB, Cadence, and Simplis
• Experience with precision ADCs, battery pack protection/monitoring ICs, fuel gauging algorithms, and accurate current sensing techniques 
• Experience in creating/presenting technical/business presentations to executive staff, internal, and/or external customers

Sr. Test Engineer

MPS is seeking a highly self-motivated and very hands-on Test Development Engineer. The candidate will be involved in all phases of product development: design for testability, test hardware and software design, hands-on debug, correlation, characterization and off-shore production release. MPS specializes in Switching regulators, LED drivers, Battery Chargers, Digital Controllers for commercial and automotive products.

Essential Functions:

• Designs component-level circuits for precision parametric measurement, dynamic signal analysis and creates automated test system software for analog and mixed-signal integrated circuits.
• Involved in all phases of product development: design for testability, IOS, test hardware and software design, hands-on debug, correlation, characterization and production release.
• Possesses knowledge of major concepts of test engineering and has the ability to apply these concepts to a wide range of complex assignments.  

Qualifications/Requirements:

• Required: Minimum of 2 years test development experience, 5+ years preferred.
• BSEE required, MSEE a plus.
• Solid experience in semiconductor power IC topologies (Chargers, , Digital Controllers) familiar with ATE test platforms, such as ETS-88(Preferred), ETS-364, J750, STS8200, CTA8280F, CTA8290D.  
• Strong proficiency with switching regulator topologies including LED Drivers, DrMOS, Battery Chargers, and Digital Controllers test development knowledge.
• Bilingual in English and Chinese. 
• Excellent communication, interpersonal and organizational skills/team work. 
• Cadence PCB layout experience is a plus.
• Willing to travel to mainland China for training/product release related items.

Location:

Taiwan

Job Summary:

This position will provide technical support to the Sales and FAE team in developing potential opportunities in NB related products and services. The FAE need to lead team to identify business and arrange resource for customers’ technical service. This person also have to co-work with AE and PL for strategy plan and future business development.   

Essential Functions:

• Technical support on MPS NB computing related products. 
• Arrange and allocate technical resource among NB related customers to have better efficiency. .
• Conduct product presentation and training to distributor and customers
• Serve as technical interface to customers; analyze the customer's issues, diagnose technically and solve regular application issues. 
• Deliver and communicate with Application Engineer and Product Marketing about customers' issues and information. 
• Provide the information including but not limited to market trends, competence analysis, and new product definition to Product Marketing Manager.

Qualifications:

• At least 5 years’ experience in NB related industry; experience on FAE manager will be a plus. 
• Familiar with Intel / AMD CPU core power and NV design, debug and test. 
• Experience on project management, following/ tracking etc. 
• Strong technical knowledge of NB power electronics.
• Ability of initiating and problem solving. 
• Good interpersonal and communication skills. 
• Adaptability- ability to meet changed condition. 
• Strong sense of responsibility, self-motivated and good team spirit.

Requirements:

• Strong knowledge in NB power design and experience is needed.
• Good English (both written and spoken).

Education:

• BS or MS majored in Electronic Engineering or related

Location:

• TAPEI, TAIWAN

Customer Service Representative

Position Overview          

The customer service representative performs a variety of customer and sales support functions, interfaces with sales teams, production planning; regional CSR’s and order management teams and various other departments within the company.

Responsibilities include, but not limited to:

• Customer Service/Global account management, Work in partnership with outside sales teams to proactively monitor Forecast, booking and shipment data to meet customer demand schedules.
• Handle expedite requests from distribution/manufacturing reps and customers, working with production planning teams and cross regional Sales/customer service teams in accordance with customer requirements and manufacturing capabilities. Follow pre-determined escalation path.
• Communicate product information, order and inventory status and manage quotes in a fast paced environment to drive bookings.
• Work with our accounts payable staff to monitor delinquent invoices.
• Provide timely and accurate responses to customers, manufacturer’s representatives, distributors, and outside sales teams
• Regional and Area Sales managers in areas of reporting, forecasting/sales analysis and general customer related issues.
• Forecast entry and keep CRM data accurate and provide ad hoc reports.
• Coordinate/follow up on the bi-annual stock rotation
• Occasionally will need to handle some general administrative function and responsibilities in local office.

Minimum Qualifications:

• Strong interpersonal, communication and leadership skills
• Flexibility to change in a highly dynamic/challenging work environment
• Outstanding organizational skills, ability to prioritize, and multi-task
• Ambitious, driven, dedicated, and willing to learn with a strong dream for team success
• Excellent problem-solving and analytical skills
• Advanced computer skills in Microsoft Office. Experience with Pivot tables and Vlookup functions.
• Ability demonstrate a technical aptitude to learn new software tools

Location: Singapore

Sr. Applications Engineer

This is a senior level position in application/system engineering.

Responsibilities include defining analog IC products, developing and debugging

reference circuits, writing datasheets and application/design notes, developing

advanced circuit structure and control scheme, and providing application support and

technical training.

Essential Functions:

Work with design engineers, field applications team, and marketing to define analog IC

products in DC/DC converters, specifically in cloud computing power solutions for CPU,

GPU, ASIC, and SOC.

Work with customer and field application team to provide total computing power

solution.

Develop application reference circuits and system level power management solutions

for AI, AUTO, Telecom, Server and Cloud.

Write datasheets, application notes, design notes and papers in magazines and

conferences to promote MPS products.

Provide application support and technical training for key customers and field

application engineers

Develop advanced topology and control algorithm to meet the new requirement in the

field of AI, automobile, telecom applications.

Qualifications/ Requirements:

5+ years of hand‐on experience in switch mode power supply designs especially in

computing power design.

Fluent communication skills in English

Excellent writing and presentation skills

Self‐motivated

Previous work experience in a plus

Prior experience in designing and defining Power Management IC products are highly

preferred.

Education:

MSEE or higher required

Location:

San Jose, CA

Job Summary:

This position’s responsibilities include editing PCB schematic and layout, rework and testing for EVB or customer’s system boards, and manage lab equipment and AE hardware tools.

Essential Functions:

• Edit PCB schematic and layout.
• Generate EVB BOM and arrange SMT.
• Establish and maintain layout component library.
• Arrange PCB rework in-house or outsourcing.
• Maintain lab cleanness. 
• Manage lab equipment.

Qualifications:

• Basic communication skills in English
• Excellent schematic drawing skills and PCB layout skills
• Previous experience in a layout engineer position in an electronics design company desired

Requirement:

• 4+ years of PCB layout experience in power circuits or analog circuits.
• College degree or higher required

Location:

Taiwan

JOB FUNCTIONS 

• Architecting hardware solutions to enable company product compliance to applicable safety standards such as ISO26262 and IEC61508 
• Working with engineering teams (marketing, design, quality and more) to support the Functional Safety Manager to derive functional safety requirements in compliance with state-of-the-art automotive standards 
• Overseeing and owning implementation of ISO26262 documentation in JAMA 
• Supporting the safety assessments with 3rd party assessors 
• Partnering with technical marketing engineers to develop mutually agreeable design specifications 
• Participating in ISO 26262 standards conference
• Occasional domestic and international travel (5-10% of the time)

EXPERIENCE REQUIREMENTS 

• 1-2 years work experience in power management IC product development or hardware engineering
• Strong understanding of analog/mixed-signal IC’s 
• Excellent verbal and written communication skills 
• Ability to work in teams and collaborate effectively with people in different functions and across regions
• Strong time management skills that enable on-time project delivery 
• Ability to work effectively in a fast-paced and rapidly changing environment 
• Ability to take the initiative and drive for results 
• Strong understanding of the IC product development process a plus
• Automotive or industrial experience a plus
• Experience with ISO26262 or IEC61508 a plus  

EDUCATION REQUIREMENTS 

• BS or MS in electrical engineering, system engineering, or automotive engineering

JOB FUNCTIONS 

• Architecting hardware solutions to enable company product compliance to applicable safety standards such as ISO26262 and IEC61508 
• Working with engineering teams (marketing, design, quality and more) to support the Functional Safety Manager to derive functional safety requirements in compliance with state-of-the-art automotive standards 
• Overseeing and owning implementation of ISO26262 documentation in JAMA 
• Supporting the safety assessments with 3rd party assessors 
• Partnering with technical marketing engineers to develop mutually agreeable design specifications 
• Participating in ISO 26262 standards conference
• Occasional domestic and international travel (5-10% of the time)

EXPERIENCE REQUIREMENTS 

• 1-2 years work experience in power management IC product development or hardware engineering
• Strong understanding of analog/mixed-signal IC’s 
• Excellent verbal and written communication skills 
• Ability to work in teams and collaborate effectively with people in different functions and across regions
• Strong time management skills that enable on-time project delivery 
• Ability to work effectively in a fast-paced and rapidly changing environment 
• Ability to take the initiative and drive for results 
• Strong understanding of the IC product development process a plus
• Automotive or industrial experience a plus
• Experience with ISO26262 or IEC61508 a plus  

EDUCATION REQUIREMENTS 

• BS or MS in electrical engineering, system engineering, or automotive engineering

JOB FUNCTIONS 

• Architecting hardware solutions to enable company product compliance to applicable safety standards such as ISO26262 and IEC61508 
• Working with engineering teams (marketing, design, quality and more) to support the Functional Safety Manager to derive functional safety requirements in compliance with state-of-the-art automotive standards 
• Overseeing and owning implementation of ISO26262 documentation in JAMA 
• Supporting the safety assessments with 3rd party assessors 
• Partnering with technical marketing engineers to develop mutually agreeable design specifications 
• Participating in ISO 26262 standards conference
• Occasional domestic and international travel (5-10% of the time)

EXPERIENCE REQUIREMENTS 

• 1-2 years work experience in power management IC product development or hardware engineering
• Strong understanding of analog/mixed-signal IC’s 
• Excellent verbal and written communication skills 
• Ability to work in teams and collaborate effectively with people in different functions and across regions
• Strong time management skills that enable on-time project delivery 
• Ability to work effectively in a fast-paced and rapidly changing environment 
• Ability to take the initiative and drive for results 
• Strong understanding of the IC product development process a plus
• Automotive or industrial experience a plus
• Experience with ISO26262 or IEC61508 a plus  

EDUCATION REQUIREMENTS 

• BS or MS in electrical engineering, system engineering, or automotive engineering

POSITION OVERVIEW

Monolithic Power Systems (MPS) is a global power management semiconductor company that is growing rapidly in the automotive market, thanks to our portfolio of incredible solutions built from our industry-leading, proprietary process technology. We are seeking a Functional Safety Engineer to participate in the definition and development of our next-generation automotive solutions that will power ADAS, Digital Cockpit, Lighting applications and more. You will be instrumental in the expansion of our safety culture and have the opportunity to collaborate with colleagues and customers across our global locations (US, Europe, Asia). Some domestic or international travel may be involved.

JOB FUNCTIONS 

• Architecting hardware solutions to enable company product compliance to applicable safety standards such as ISO26262 and IEC61508 
• Working with engineering teams (marketing, design, quality and more) to support the Functional Safety Manager to derive functional safety requirements in compliance with state-of-the-art automotive standards 
• Overseeing and owning implementation of ISO26262 documentation in JAMA 
• Supporting the safety assessments with 3rd party assessors 
• Partnering with technical marketing engineers to develop mutually agreeable design specifications 
• Participating in ISO 26262 standards conference
• Occasional domestic and international travel (5-10% of the time)

EXPERIENCE REQUIREMENTS 

• 1-2 years work experience in power management IC product development or hardware engineering
• Strong understanding of analog/mixed-signal IC’s 
• Excellent verbal and written communication skills 
• Ability to work in teams and collaborate effectively with people in different functions and across regions
• Strong time management skills that enable on-time project delivery 
• Ability to work effectively in a fast-paced and rapidly changing environment 
• Ability to take the initiative and drive for results 
• Strong understanding of the IC product development process a plus
• Automotive or industrial experience a plus
• Experience with ISO26262 or IEC61508 a plus  
• ISO26262 Functional Safety professional certification a plus

EDUCATION REQUIREMENTS 

• BS or MS in electrical engineering, system engineering, or automotive engineering

LOCATION 

Livonia, MI

Sr. Field Applications Engineer 

This person will join the growing MPS Seattle team, serving as the technical support contact for key MPS accounts in the Seattle area. The main responsibility of this position is to engage with key customers and secure design wins incorporating MPS products and services. The FAE is also responsible for defining and sharing current and emerging customer technical needs to improve tactical and strategic product positioning.

Essential Functions:

Contribute to MPS US Revenue growth through direct and in-direct technical activities.

Develop a solid technical understanding of our products and relevant solutions. 

Provide deep technical support to customers to meet or improve upon customer’s requirements with MPS products, specifically multiphase, high current DC/DC.

Provide thorough customer design support including schematic and PCB layout review

Identify and develop new business opportunities to grow MPS business.

Gather potential market moves and competitors’ activities for MPS product strategy.

Qualifications:

BSEE/MSEE with 5+ years power management and analog systems experience.

Hands on experience with multiphase point-of-load DC-DC power conversion.

Experience with Intel and/or AMD VR requirements and specifications preferred

Ability to interface directly with customers and solve customer problems.

Ability to work independently with strong analytical skills, self-motivated and excellent interpersonal skills. 

Ability to communicate at all levels written and oral. 

Oral /written proficiency in English. 

Willing to drive to local customers and travel up to 20% of time to San Jose.

Location:

Kirkland, WA

Sr. / Design Engineer (AC/DC)

Responsibilities: 

As a Design Engineer you will be responsible for switching power supply development of integrated circuits using CMOS/Bipolar analog/digital circuitry Specific responsibilities are:

• Mixed-mode integrated circuit design for switching power supply:
• Layout supervision and verification.
• Preparation of test plan.
• Product characterization.
• Bench evaluation both at the silicon level and application level,
• Documentation.
• Behavioral modeling of analog and mixed-mode circuits
• Work with system engineer on new product definitions.  

Requirements:

• BSEE or foreign equivalent with 5 years of experience, or MSEE or foreign equivalent with 3 years of experience
• A minimum of 5 years of experience with emphasis on analog and/or digital Integrated Circuit ( IC ) design
• Hands-on experience with analog / digital IC design, preferred in high voltage AC/DC switching power supply.
• Familiarity of analog circuit blocks and device physics.
• Understanding of digital IC design.
• Excellent written and oral communications with experience in specification creation, technical report writing and test plans / instructions.
• Team player

Locations:

San Jose, CA, Kirkland, WA, Barcelona, Spain, OR Taipei, TW

Field Sales Engineer (FSE) North East Germany

This person will be responsible for the sales area of North East Germany. It is the goal to develop and grow MPS business in the region by identifying high potential customers: automotive, industrial, consumer and other available applications. 

Suitable candidate has a strong sales background and customer knowledge established in North East Germany.

Responsibilities:

• Responsible for driving all design-in activity and wins within assigned customer accounts and geographies.  
• Responsible for consistently meeting or exceeding assigned revenue targets.
• Work closely with MPS product division marketing and engineering personnel to identify target applications/circuits to increase design wins and expand print at both new and existing customers.
• Develop and grow management level and design engineering relationships at strategic customers.  
• Identify new customer targets to engage and expand the MPS customer base.

Desired attributes:

• Self-motivated to work as an individual sales contributor in a field or home office.
• Technical ability to learn entire MPS product portfolio and the “go to market” strategy for each product line.
• Ability to engage strong sales personnel (including manufacturer representatives and channel partners)
• Strong interpersonal skills such as active listening, collaboration, problem-solving, conflict resolution, and adaptability.
• Ability to interface with MPS executive staff and product divisions to explain/defend key business strategies, revenue targets and customer situations within assigned territory.        
• Strong presentation skills to all levels of personnel (both customer and MPS internal divisions/executives.)

Requirements: 

• Technical degree (minimum bachelors), preferably in an Engineering discipline or a proven track record of success in selling electronic components for 4+ years. 
• A valid driver’s license and a willingness to travel extensively 3-4 days per week

Location: Germany (Berlin/Hannover/Leipzig Area)

Job Summary:

The candidate must have demonstrated success in digital design & verification/infrastructure development for digital FPGAs/ASICs. Other key skills include technical/project leadership, documentation, RTL design knowledge, and backend flow and tools knowledge. Candidate is expected to be lead designer, verification, and be technical focus on one or more device and/or sections.  Candidate will also be expected to support pre/post-silicon design validation and support Design/ATE/Application & Systems group. 

MPS products includes: switching regulators, sensors, motor control, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as broadband modems, notebooks, cell phones, telecom, fiber optics, digital camera, automobile and network equipment.

Essential Functions:

• Digital Design (RTL design): ASIC or FPGA from concept to implementation 
• Ability to implement consistent and clear digital architecture across several products
• Digital Verification: Development test plans, test benches and automated test cases
• Solid knowledge and experience working through the entire Digital Design Flow: Specification definition, RTL Verification, Synthesis, P&R, Gate-Level Verification, Power Estimation, ATPG Generation and Simulation, AMS Sims, etc. 
• Create scripting to support design and verification automation
• Estimate and manage time/tasks completion to target schedule

Qualifications:

• 3+ years’ experience in ASIC/FPGA design and verification with PhDEE/BSEE/MSEE or equivalent
• Ability to work in local location without need for sponsorship
• Strong knowledge of ASIC development process and digital design techniques, with experience in low power design techniques/tradeoffs.
• Proficient in standard DV languages (Verilog, SystemVerilog, UVM) and automated regression testcase development, and reporting/tracking coverage metrics.
• Experience with programming, scripting and automation languages(C/C++, shell, Perl, TCL, Python, etc).  
• Excellent Knowledge & Use of industry standard ASIC tools/flow for daily work: Digital Simulators, synthesis tools, DFT, LEC, STA, etc.
• Good written/verbal communication skills and strong team work/collaboration. 
• Experience with the following is desired:
• Experience with battery charger ICs including state machine design and requirements
• Embedded designs and/or firmware development
• Knowledge of power management industry/applications 
• I2C, I3C, SPI, USB, PMBUS
• GITLab 

Location: USA (San Jose) or EU (Barcelona/Budapest)

Staff Design Engineer

Job Description:

As a staff level design engineer, you will be responsible for block level analog circuit design, simulation; schematic capture; layout verification and post-layout extraction and simulation; top-level integration and verification; Also will assist in IC lab evaluation and debug activities.

Requirements:

At least 5 - 7 years of experience in analog and mixed-signal integrated circuit design

Prior design experience in ADC design: SAR/Delta-Sigma/Counting/Pipelined/Flash

Prior design experience in Low-Noise Amplifier/Op-amp/RF design is a plus

Prior design experience in low-drift low-noise reference voltage generator is a plus

Solid understanding of transistor level analog and digital circuit theory

Good analog integrated circuit implementation skills and knowledge in reducing design risk

Proficiency in design tools such as Cadence/Mentor

Solid knowledge in layout design and extraction

Knowledge of digital design flow, digital system, and analog/digital interface and integration is a plus

Experience on mixed-mode system level simulation (i.e., AMS) on SOC is a plus

Solid written & verbal communication abilities.

Self-motivated, willing to learn new technologies, & capable of working effectively within a group of individuals across multiple disciplines (analog, digital, system/algorithms, packaging/ESD, test/application and etc.).

Minimum Master Degree (M.S. or M.Eng.) in Electrical Engineering

Location:  San Jose, California, US

We are looking for an Account Sales Manager in New Taipei City. As an Account Sales Manager, you are responsible for selling MPS’ Products and Solutions through Distribution Channel Partners and interacting directly with customers to secure OEM/ODM customer design win. Essential to success in this job is a keen ability develop new accounts and to penetrate into your assigned accounts.  

Responsibilities 

• To develop the business opportunities within focus accounts.

 • Drive demand creation and revenue growth in cloud/server segment and achieve the sales revenue target.

• Develop an account plan to sell to customers based on their business needs.

• Establish and maintain the relationships with the accounts, manage the relevant distribution resources to support the business.

• Monitor the market and industry to identify new applications (design in) in order to initiate new business opportunities in key applications.

• Work with FAE, AE teams to provide technical support and manage customer problems and complaints.

• Coordinate with CSR, Distribution Channel Partners to ensure product delivery dates align with expectations of the customer & provide accurate sales/demand forecasts.

.• Must be self-starter capable of conducting assignments independently, reviewing own progress and providing on-going updates to your manager

REQUIREMENTS:

•5 years sales experience, worked in semiconductor area before is preferred.

•Bachelor degree in Electronic Engineering or equivalent is preferred.

•Good local language and confident in English writing, presentation and communication skills. Able to confidently interface with appropriate personnel, Capable of gaining respect and trust of customers with proven influencing skills.

•Team work player and willing to travel domestically & regionally.

Field Applications Engineer– Eastern Europe

Job Summary:

This person will be the primary technical support contact for MPS accounts in South Eastern Europe with Focus on Hungary, Poland and Romania. The main responsibility of this position is to engage with key customers and secure design wins incorporating MPS products and services. The FAE is also responsible for defining and sharing current and emerging customer technical needs to improve tactical and strategic product positioning.

 Responsibilities:

• Ability to interface directly with customers and solve customer problems on board level
• Ability to work independently with strong analytical skills, self-motivated and excellent interpersonal skills 
• Ability to communicate at all levels written and oral.

• Support customer on EMI / Layout and Schematic issues
• Willing to travel in the sales region

 Qualifications:

 Locations:

• Hungary 

Customer Service Representative

Job Summary:

The Customer Service Representative will support the Regional Sales Manager for Eastern Europe about administrative / customer related tasks, like sample orders, follow up calls to customers, clarifications with team / factory, communication with local distributors and reps. The person performs also various functions in the review, processing and entry of sample orders as well as providing status and shipping information of existing orders. 

Essential Functions:

• Review daily incoming sample requests
• Order entry of daily sample requests into system
• Follow up with customers about customer related tasks / topics
• Issue tracking numbers to sample requesters on shipped orders
• Provide material to Product Engineering and applications engineers as needed 
• Process orders, shipments and inventory for MPS e-commerce business
• Assist the customer service department as needed with daily tasks including but not limited to:
• Creating reports as needed to track sample transactions and sample distribution trends
• Provide data as needed to management on sample activity by customer; region, etc.
• Miscellaneous customer service tasks as needed; such as stock checks, expedites etc.

Qualifications:

• College degree preferred.
• Oral /written proficiency in English 
• Multi language communication preferred – German, Polish, Hungarian 
• All aspects of Microsoft office; strong excel skills 
• Strong communication skills both written and verbal 
• Ability to communicate between all levels of management
• Attention to detail
• Ability to work accurately in a deadline driven environment

Location: Hungary, Budapest

Customer Service Representative 

Job Summary:

The Customer Service Representative will support the Regional Sales & Field Application Engineers in Germany about administrative / customer related tasks, like sample orders, follow up calls towards customers, clarifications with team / factory, communication with local distributors and reps. The person performs also various functions in the review, processing and entry of sample orders as well as providing status and shipping information of existing orders. 

Essential Functions:

• Review daily incoming sample requests
• Order entry of daily sample requests into system
• Follow up with customers about customer related tasks / topics
• Issue tracking numbers to sample requesters on shipped orders
• Provide material to Product Engineering and applications engineers as needed 
• Process orders, shipments and inventory for MPS e-commerce business
• Maintain and update sales and customer records
• Assist the customer service department as needed with daily tasks including but not limited to:
• Creating reports as needed to track sample transactions and sample distribution trends
• Provide data as needed to management on sample activity by customer; region, etc.
• Miscellaneous customer service tasks as needed; such as stock checks, expedites etc.

Qualifications:

Proven work experience as a Sales administrator or Sales support agent

Hands on experience with CRM software and MS Office (MS Excel in particular)

A team player with high level of dedication

Ability to work under strict deadlines

Ability to communicate between all levels of management

Ability to multi-task, prioritize, and manage time effectively

Languages             

• German & English (written and oral)

Location: Germany, Ettenheim

Sr. Applications Engineer

Job Summary:

• This is a senior level position in application/system engineering.
• Responsibilities include defining analog IC and module products, developing and debugging reference circuits, writing datasheets and application/design notes, and providing application support and technical training.

Essential Functions:

• Work with design engineers, field applications team, and marketing to define analog IC products in DC/DC converters, specifically in cloud computing power solutions for CPU, GPU, ASIC, and SOC.
• Define and design 48V DC/DC module products, including isolated and non-isolated topologies.
• Work with customer and field application team to provide total computing power solution.
• Develop application reference circuits and system level power management solutions for Server and Cloud.
• Write datasheets, application notes, design notes and papers in magazines and conferences to promote MPS products.

Qualifications/ Requirements:

• 5+ years of hand-on experience in switch mode power supply designs especially in multi-phase core power design.
• Self-motivated and can-do attitude.
• Previous work experience in a plus
• Fluent communication skills in English
• Excellent writing and presentation skills
• Prior experience in defining power management IC or power modules are highly preferred.

Education:

• MSEE or higher required

Location:

San Jose, CA or Kirkland, WA

Job Summary:

• This is a senior level position in application/system engineering
• Responsibilities include defining and debugging analog IC products, developing reference circuits, writing datasheets and application/design notes, and providing application support and technical training.

Essential functions:

• Work with design engineers, field applications team, and marketing to define analog IC products in DC/DC converters, controllers, and DrMOS applications, specifically in computing power solutions for CPU, GPU, ASIC, and SOC. 
  • Prior experience in designing and defining these products are highly desired
• Work with customer and field application team to provide total computing power solution

• Develop application reference circuits and system level power management solutions for computing power and server markets
• Write datasheets, application notes, design notes and papers in magazines and conferences to promote MPS products
• Work with design engineer, product engineer, and test engineer on test items, characterization limits and data review
• Provide application support and technical training for key customers and field application engineers
• Oversee Junior Level engineers to perform road tests and customer supports

Qualifications:

• 8+ years of hand-on experience in switch mode power supply designs especially in multi-phase core power design.

• Fluent communication skills in English
• Excellent writing and presentation skills
• Self-motivated and can-do attitude
• Previous experience in a power supply manufacturer or power management IC company desired
• MSEE or higher required

Location:

• San Jose, CA or Kirkland, WA

Job Summary:

This position’s responsibilities include enhancing and debugging analog IC products, developing reference circuits, writing datasheets and application/design notes, and providing application support for Client computing customers.

Essential functions:

• Work with design engineers, field applications team, and marketing to enhance and debug analog IC products.
• Develop application reference circuits.
• Write datasheets, application notes, design notes. 
• Provide application support for key customers and field application engineers

Qualifications:

• Fluent communication skills in English
• Excellent writing and presentation skills
• Previous experience in a power supply manufacturer or power management IC company desired

Requirement:

• 2+ years of hands-on experience in switch mode power designs including DC/DC, AC/DC, or inverters.
• MSEE or higher required

Location:

Taipei, Taiwan

Job Summary:

This is a senior level position in application/system engineering. Responsibilities include defining and debugging analog IC products, providing technical support for key customers, developing reference circuits, and writing datasheets and application/design notes.

Essential Functions:

• Provide application technical support and technical training for key customers and field application engineers.
• Work with design engineers, field applications team, and marketing to define and debug analog/digital IC products in DC/DC converters, Core power conversion, and DrMOS applications.
• Develop application reference circuits and system level power management solutions for computing, networking, server and cloud markets.
• Write datasheets, application notes, design notes and papers in magazines and conferences to promote MPS products. 

Qualifications:

• 8+ years of hand-on experience in switch mode power supplies including DC/DC, AC/DC or inverters.
• Previous experience with low voltage/high current multi-phase buck converter design/test/optimization for CPU/GPU power delivery applications is highly preferred.
• Fluent communication skills in English
• Excellent customer communication skills
• Excellent writing and presentation skills
• Self-motivated
• Previous experience in a power supply manufacturer or power management IC company is a plus
• MSEE or higher required

Location:

• San Jose, CA or Kirkland, WA

Job Summary: 

A Sr. DFT Engineer leads the end-to-end design, implementation, verification, validation and debugging of Digital and Mixed-Signal ICs DFT architectures and solutions utilizing leading edge technologies with industry standard ASIC tools. Products to be designed/verified may include power management, signal management and mixed signal functions.  

MPS products include: switching regulators, sensors, motor control, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as notebooks, cell phones, telecom, digital camera, automobile and network equipment. 

Essential Functions: 

• Development and implementation of DFT Architectures and Techniques.
• RTL Design, debugging and Verification.
• Physical implementation, debugging and Gate-Level Verification.
• Generation of High-Quality Test and Debug Patterns.
• STA and Power Analysis of DFT Modes.
• Silicon bring-up, support, failure analysis, backtracking and diagnosis.  
• Synthesis: timing, input/output and DFT constraints definition. Results and Reports analysis.
• LEC: constraints definition and debugging. Results and Reports analysis.
• ATPG Generation and Simulation.
• Analog, Digital and Mixed-Signal AMS Verification support.
• Close interaction with other Departments (Analog, Testing, Product, Digital).
• Analog and Digital Functional Testing.
• Test Plan Definition for Analog and Digital Structural and Functional Testing.

 Qualifications: 

• BSEE + 8 years of experience, MSEE + 5 years of experience as a DFT Engineer. 
• Has the ability to work independently and collaborate with other teams or departments.
• Solid knowledge of the full ASIC development process.
• Excellent RTL Verilog or System Verilog coding skills.
• Knowledge of standard Digital Verification languages (SystemVerilog/UVM) and Gate-Level Sims.
• Experience with Standard and Advanced DFT Techniques (ATPG, SCAN, IDDQ, Delay Fault, SCAN Compression/EDT, Reduced Pin Count SCAN, Boundary SCAN, LBIST, MBIST, ABIST, JTAG, etc.).
• Proficiency with ATE implementation, debugging and failure backtracking.
• Excellent understanding of Trade-Off between Test Quality and Test Time.
• Very good understanding of the backend flow: Synthesis, P&R, DFT, Power, LEC and STA.                
• Excellent written/verbal communication skills and strong team work/collaboration.  
• Knowledge/Experience with the following is a plus: 
• Automotive standards
• Knowledge of power management industry/applications 
• I2C, I3C, SPI, USB, PMBUS, ARM and/or RISC-V designs
• Scripting and automation languages like TCL, Phyton and C/C++
• ASIC tool knowledge(Cadence, Synopsis) and DFT tool knowledge(Modus, Tetramax, Testsent Fastscan/TestKompress, TestInsight, etc)

Location:  Barcelona, Spain 

Field Sales Engineer (FSE) 

Primary functions: 

• Responsible for driving all design-in activity and wins within assigned customer accounts and geographies.  
• Responsible for consistently meeting or exceeding assigned revenue targets.
• Work closely with MPS product division marketing and engineering personnel to identify target applications/circuits to increase design wins and expand print at both new and existing customers.
• Develop and grow management level and design engineering relationships at strategic customers.  
• Identify new customer targets to engage and expand the MPS customer base.

Desired attributes:

• Self-motivated to work as an individual sales contributor in a field or home office.

• Technical ability to learn entire MPS product portfolio and the “go to market” strategy for each product line.
• Ability to engage strong sales personnel (including manufacturer representatives and channel partners)
• Strong interpersonal skills such as active listening, collaboration, problem-solving, conflict resolution, and adaptability.
• Ability to interface with MPS executive staff and product divisions to explain/defend key business strategies, revenue targets and customer situations within assigned territory.        

• Strong presentation skills to all levels of personnel (both customer and MPS internal divisions/executives.)

• Working knowledge of office tools such as Excel, Outlook, Power Point, Teams and ZOOM.
• Willingness and ability to develop conflict resolution skills between customer, sales (internal and representatives) and other MPS product and support divisions.

Requirements: 

• Technical degree (minimum bachelors), preferably in an Engineering discipline or a proven track record of success in selling electronic components for 3+ years. 
  • Will consider an experienced Field Applications Engineer or Design Engineer with the willingness to move to Sales and a strong desire to succeed.

Location: Detroit, MI

Sr. / Field Sales Engineer 

Position Overview: 

Job Functions:

• Responsible for driving all design-in activity and wins within assigned customer accounts and geographies.  
• Responsible for consistently exceeding assigned revenue targets.
• Indirect management of Manufacturers Representatives and channel partners (distribution branches) supporting MPS products.  
• Work closely with MPS product division marketing and engineering personnel to identify market trends and customer specific requirements, leading to MPS leadership position at strategic accounts.  

Qualifications:

• Strong knowledge of target customers as well as industry trends and competitive landscape.
• Need technical ability to understand entire MPS product portfolio and the “go to market” strategy for each product line.
• Good people and analytical skills to manage strong sales personnel (including manufacturer representatives and channel partners) to succeed and continuously grow design wins, revenue and customer relationships.
• Must be able to grow management level and design engineering relationships at strategic customers.  
• Must have ability to interface with MPS executive staff and product divisions to explain/defend key business strategies, revenue targets and customer situations within assigned territory.  
• Good presentation skills to all levels of personnel (both customer and MPS internal divisions/executives.)
• Self motivated to work as an individual sales contributor in a field or home office.

Requirements:

• This position requires 5+ years of previous experience selling electronic components, with a proven track record of success.
• A technical degree (minimum bachelors), preferably in an engineering discipline.

Location: San Jose, CA

Job Summary:

As the Field Application Manager, you will be responsible for leading a growing, dynamic team of Field Application Engineers in our factory customer technical support operations. As a player/coach, you will recruit, train and coach Field Applications Engineers with 0-3 years of experience, support customers remotely, improve the customer experience, increase the results of the technical support team and contribute to improving processes and policies as the operation grows.

Essential Functions:

• Recruit, train and coach Field Applications Engineers with 0-3 years of experience.
• Review day-to-day support activities of team while coaching in the moment utilizing white board and other training tools to educate on power theory, applications and systems.
• Provide exceptional technical support for customers; ensure customer satisfaction is achieved.
• Remotely interact and build relationships with customers in North American markets.
• Drive continuous improvement initiatives to improve customer support.
• Collaborate with field sales and internal teams to achieve objectives.
• Measure, track, and grow customer deliverables and design win results.
• Assist with development and implementation of procedures and policies for functional area
• Provide regular updates to management.

Qualifications:

• 10+ years of hand-on experience in switch mode power supplies including DC/DC, AC/DC or inverters.
• Prior experience with low voltage/high current multi-phase buck converter design or support for CPU/GPU power delivery applications is highly desired.
• Some experience leading, coaching and developing teams is highly desired
• Ability to work under tight deadlines and manage multiple projects at a time.
• Excellent communication skills including verbal, written and presenting with fluency in English
• Self-motivated
• Prior experience in a power supply manufacturer or power management IC company is desired
• Prior teaching experience is desired
• BSEE or higher required

Field Application Engineer, Japan

Job Summary:

We are looking for a Field Application Engineer in Japan for a fast-growing Analog / Mixed-signal Integrated Circuit Company, Monolithic Power Systems, Inc. This FAE will work with Design Engineers and customers in developing power management IC’s and systems level solutions for digital consumer AV, digital imaging, PC peripherals, portable handheld, networking and automotive. This includes new product specification contributions, and customer application support in the field. This individual will support outside sales representatives at customer accounts within a geographic location. This position will also involve some travel within a specific region.  

Essential Functions:

• Provide technical support to Customers & Sales Channels Partners throughout territory.
• Ensure coordination of technical matters with the Factory in California and design center in

　   Hangzhou, Chengdu as needed.

• Manage Joint Development Programs with Customers.
• Discover new potential customer, application and opportunities with introducing right products
• Communicate with HQs, HZ and CD train district employees for new product(s) promotion

 　  activity

• Bring new product ideas for future business development

Qualifications:

• 5+ years of hands-on experience in analog power management electronics.
• Understand basic power circuit and power architecture
• Excellent communication / interpersonal skills. 
• Fluent communication skill (oral/written) in Japanese language. 
• Oral / written proficiency in the English language.
• Ability to travel up to 50% of the time.
• Self-starter, self-motivated.
• Bachelor’s degree is preferred

Desired Skills:

• Experience in design power electronics circuit (experience in DC/DC over 20A is mandatory, in AC/DC is preferable).
• Understanding of most common power supply architectures, and General PWM IC operation.
• The ability to develop strong relationships with our customers in your region. 
• The ability to evaluate electronic performance of EVB and customer boards on bench.
• Excellent communication/ interpersonal skills. 

Field Applications Engineer

Job Summary:

The FAE will provide technical support for customers and to the broader Sales and FAE team.  The FAE will assist in developing opportunities incorporating MPS products and follow those through to production solutions. The FAE identifies and shares current and emerging customer technical needs to improve MPS product positioning and guide new product development.

Essential Functions:

• Contribute to MPS US Revenue growth through direct and in-direct technical activities.
• Learn MPS power products and technology and present to customers.
• Engage with customers to understand their system power requirements.
• Provide technical support to match customer’s requirements with MPS solutions.
• Build technical relationships with engineering community.

Qualifications:

• Oral /written proficiency in English 
• Excellent communication / interpersonal skills
• BSEE or higher 
• Must be open to relocate to another territory

Sr. Field Applications Engineer 

Job Summary:

 This person will be the primary technical and field applications support contact for some of MPS major accounts. The main responsibility of this position is to engage with key customers and secure design wins incorporating MPS products and services. The FAE is also responsible for defining and sharing current and emerging customer technical needs to improve the tactical and strategic product positioning.

Essential Functions:

Qualifications:

Location:

San Jose, CA

Sr. Field Applications Engineer 

Job Summary:

 This person will be the primary technical and field applications support contact for some of MPS major accounts. The main responsibility of this position is to engage with key customers and secure design wins incorporating MPS products and services. The FAE is also responsible for defining and sharing current and emerging customer technical needs to improve the tactical and strategic product positioning.

Essential Functions:

Qualifications:

Location:

San Jose, CA

Field Applications Engineer

Job Summary:

The FAE will provide technical support for customers and to the broader Sales and FAE team.  The FAE will assist in developing opportunities incorporating MPS products and follow those through to production solutions. The FAE identifies and shares current and emerging customer technical needs to improve MPS product positioning and guide new product development.

Essential Functions:

• Contribute to MPS US Revenue growth through direct and in-direct technical activities.
• Learn MPS power products and technology and present to customers.
• Engage with customers to understand their system power requirements.
• Provide technical support to match customer’s requirements with MPS solutions.
• Build technical relationships with engineering community.

Qualifications:

• Oral /written proficiency in English 
• Excellent communication / interpersonal skills
• BSEE or higher 
• Must be open to relocate to another territory

Job Summary: 

A Sr. Digital Design Engineer leads the end-to-end design and development of digital and mixed-signal ICs utilizing leading edge technologies with industry standard ASIC tools. Products to be designed/verified may include power management, signal management and mixed signal functions.   

MPS products include: switching regulators, sensors, motor control, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as notebooks, cell phones, telecom, digital camera, automobile and network equipment. 

Essential Functions: 

• Digital Architecture Definition and Documentation.
• RTL Design, debugging and Verification.
• Verification metrics analysis.
• IP Definition, Development, Integration and Verification.
• Synthesis: timing, input/output and DFT constraints definition. Results and Reports analysis.
• LEC: constraints definition and debugging. Results and Reports analysis.
• P&R support with MMMC definition and debugging.
• DFT Implementation, debugging and reports analysis. 
• ATPG Generation and Simulation.
• Gate-Level Verification.
• Power Simulations and Analysis.
• Timing Analysis and Sign-off.
• AMS Verification support.
• Post-Silicon Validation support.
• Close interaction with other Departments for Product definition.

Qualifications: 

• BSEE + 8 years of experience, MSEE + 5 years of experience in digital ASIC design. 
• Has the ability to work independently and collaborate with other teams or departments.
• Solid knowledge of the full ASIC development process. 
• Excellent RTL Verilog or System Verilog coding skills. 
• Knowledge of standard Digital Verification languages (System Verilog, UVM) and metrics.
• Very good understanding of the backend flow: Synthesis, P&R, DFT, Power, LEC and STA.                
• Excellent written/verbal communication skills and strong team work/collaboration.  
• Knowledge/Experience with the following is a plus: 
• Automotive standards
• Embedded designs and/or firmware development
• Knowledge of power management industry/applications 
• I2C, I3C, SPI, USB, PMBUS
• FPGA design and validation
• ARM designs
• Scripting and automation languages like TCL, Phyton and C/C++

Location: 

Barcelona, Spain   

Job Summary: 

 This is a senior level position in application/system engineering. Responsibilities include evaluating and defining power IC products, providing technical support for key customers, developing reference circuits and PCB layouts, preparing datasheets and application/design notes, and provide training to FAEs. 

Essential Functions: 

 · Work with design engineers, field applications team, production, testing, and marketing to evaluate, debug and define DC-DC buck converters. 

· Provide application technical support and technical training for key customers and field application engineers.

· Develop application reference circuits and PCB layouts for computing, networking, telecom, server and cloud markets. 

· Prepare datasheets, application notes, design notes and papers in magazines and conferences to promote MPS products.  

Qualifications:   

· 3+ years of hand-on experience in switch mode power supplies, including DC-DC buck converters. 

· Self-motivated and detail-oriented

· Excellent communication skills 

· Excellent writing and presentation skills 

· Familiar with various lab equipments

· Experience with softwares like MathCAD, ANSYS, Simplis and LTspice is a plus

· Previous experience in a power supply manufacturer or power management IC company desired 

· MSEE or higher required

MPS is seeking a highly self-motivated engineer with strong knowledge in power electronics. This person will work in supporting to introduce AC/DC and DC/DC converter solution in our potential customer, providing expertise knowledge and developing prototypes for specific applications. The engineer will collaborate with customers and design team and customers to propose novel solutions to expand current MPS portfolio. 

Essential Functions:

• Develop new architectures for high AC-DC and DC-DC power devices
• Simulate and evaluate requirements of new designs. Propose different solution focus on cost, efficiency or space. 
• Design schematic and PCB to deliver a fully testable solution.
• Validate, test and document new reference design and integrated circuits. Including transient, ripple and EMC measurements.
• Support marketing and sales on the development of Proof-of-concept and EVB for show our solutions.
• Write technical articles, datasheet and application notes.
• Support customer around Europe and US to introduce MPS solutions

Qualifications:

• BS in related engineering field (MS preferred) 
• Solid understanding and experience in power electronic and analog design. 
• Good knowledge in power electronics architectures (one phase or 3 phase), circuits and devices (Silicon carbide devices, Gan device)
• Experience of modeling and control of power converter
• Good knowledge on CAD software (Altium/Orcad preferred) and development of schematic and PCB layouts.
• Oral / written proficiency in English. 
• Excellent communication, interpersonal and organizational skills

Job Summary:  Work with key customers to create demand for MPS Products. 

Responsibilities:

• Build relationships with End Customers, distributors, FAE and Marketing team;
• Manage key customers business with flexible sales ability;
• Use influence to achieve sales goals and objectives;
• Travel a minimum of 25% of the time in related area.

Requirements:

• Bachelors in Electrical Engineering or Computer Science/Engineering, over 3 years' experience in sales/ marketing of Analog or Mix signal devices and/or integrated circuits;
• Must have good oral and written communications skills and excellent interpersonal skills;
• Should be self-starter, highly energetic, flexible, capable of making sound project decisions, and detail orientated;
• Solid ability to communicate in English.

Responsibilities:

• As a part of the team to work with distributors to support small and medium-sized customers and growing business continuously.
• Manage all business review processes with distributors and Ensure distributor communications are in line with distribution strategy.
• To get continuous in new opportunity from local distributors on resources for demand creation.
• To be interface between distributors and cross-functional teams, Assist in the management and development of the agent's targets.
• Implement distributor management process with measurement tools to achieve goals , Develop scorecard to monitor and measure initiatives and progress.

Requirements:

•  Bachelors in Electrical Engineering or Computer Science/Engineering, 3-5 years experience in semiconductor industry is required; 
•  Experiences in distribution business and technical background is plus;  
• Fluent in English.

Job Summary: Work with customers to create demand for MPS Products

Responsibilities:1. Build channel and connect to MPS customers;2. Manage and develop key accounts to achieve the sales goal and drive new design-ins and design-wins;3. Customer relationship building;4. Coordinate with distributors on sales forecast, customer demand and inventory control;5. Coordinate with FAE and Marketing team on new product promotion and new market penetration. Requirements:1. Bachelors in Electrical Engineering or Computer Science/Engineering, over 3 years experience in sales/ marketing of Analog or Mix signal IC;2. Experience with power management is preferred;3. Good communications skills and excellent interpersonal skills;4. Positive and aggressive attitude;5. Solid ability to communicate in English.

Overview：

This role will be responsible to manage, optimize, and improve MPS China online store performance and cooperation with other online distributors according to business requirements from various stakeholders. This position will also contribute to promotional campaigns, increasing the quantity and quality of traffic and leads to marketing database. Besides, you will be required to develop a detailed understanding of MPS business in the field of marketing automation tools and after events report analysis to dig out more valuable follow-ups for business.

Key Responsibilities:

• Plan and execute MPS ecommerce strategy and carry out digital properties to deliver a fine user experience, drive revenue potential and brand awareness.
• Take lead on ecommerce branding and promotional campaigns.
• Optimize ecommerce process, user experience and better serve customers online.
• Work with multiple online catalog distributors to drive ecommerce growth externally, including data analysis, new customer generation, demand creation, process optimization, and relation maintenance.
• Collaborate with MPS online supporting team to follow up with customer needs and dig out more potentials.
• Create and analyze weekly and monthly report for ecommerce, make recommendations to improve digital marketing effectiveness and impact.
• Act as a liaison between online technical supporting team and marketing team to design, ensure optimal operation performance.
• Assist to design, carry out other digital marketing campaigns by leveraging different marketing platforms internally and externally. Conduct in depth data analysis around audience segmentation, campaign optimization and demand creation. 

Requirements:

• Bachelor’s degree or above, major in ecommerce, marketing or communication related majors
• >3 years of working experience, ecommerce and online sales/demand generation experience strongly preferred.
• Strong skills in number analysis and problem solving.
• Excellent oral and written communication skills in both Chinese and English, ability to interact with various kinds of stakeholders in different countries and groups
• Highly self-driven, detail oriented, team player

Overview:

The IT Security Engineer will join a dynamic and growing Global IT organization with global support responsibilities particularly in Asia Pacific. This is an IT Security Engineer focused position, which requires in-depth technical expertise in security related technologies.

Job Responsibilities:

• Possess, understand and apply knowledge and experience of industrial control system security, including technical controls, security assessments, policies, plans and procedures.
• Plan and carry out an organization’s information security strategy
• Identify security risks
• Design and implement new networking and security systems
• Perform vulnerability assessments, audits, and tabletop exercises to improve an organizations security and compliance posture
• Deploy and maintain EDR, DLP, CASB and other security tools
• Revise employee security protocols.
• Respond to employee technical issues

• Maintain and upkeep current security infrastructure
• Conducts periodic scans of networks to find any vulnerability
• Conduct penetration testing
• Monitor networks and systems for security breaches or intrusions 
• Leads incident response activities to minimize the impact

Qualifications:

• BS in computer science or relevant work
• Security operations background that supports your understanding of security tools (ie:  detection forensics, log normalization and privilege separation etc. 
• Familiar with NIST framework
• Windows/Linux System administrator experience
• Scripting/coding/network automation skills (Python, Ansible)
• Direct experience with EDR – Sentinel one, intrusion detection, firewall (Palo Alto Network)
• Knowledge of risk assessment tools, technologies and methods 
• Knowledge of disaster recovery computer forensic tools, technologies and methods
• Experience planning researching and developing security policies, standards and procedures
• Ability to communicate network security issues to peers and management
• Excellent verbal and written communication skills including a focus on providing continuous, proactive communications to management, peers, and stakeholders while working on projects

Location: San Jose, CA OR Kirkland, WA

Sr. Component Engineer/Manager

Job Summary

We are seeking to hire a creative and collaborative Sr. Component Engineer/Manager to join our team. Work with multi-functional teams for the power module and IC product planning, delivery, PCBA/SMT support and quality management. This role is essential to bring the products successful to the market.

Essential Functions

• Component and PCBA vendor management, quality control and regular audit;
• Passive components import and sourcing;
• Work with PCBA and package partners to generate the PCBA, Surface Mount (SMT) guidelines for MPS module and IC products;

Required Skills

• Experiences working directly with PCBA and component suppliers;
• Understand the component management, sourcing;
• Solid knowledge on PCBA, surface mount process for QFN, LGA and BGA packages;
• Knowledge on semiconductor or power module quality management and reliability test;

Qualifications

• BSEE/MSEE with 5+ years experiences of electronics industry PCBA, QA or component engineers;
• Power supply or power module industry experiences is a big plus;
• Good verbal and written skills

Locations

• Taipei, TW OR Chengdu, Shenzhen, Shanghai, China

Product Marketing Manager (PMM)

Job Summary:

MPS is seeking a self-motivated individual who will help to define our new product strategy and execution. This individual will work with IC design, Field & Factory Application Engineers, Sales, and Marketing Communications to ensure the timely and successful launch of new products into the marketplace. Strategic involvement includes product definition, market & competitive analysis, and managing new product design activity. Tactical responsibility includes new product releases, advertising, and marketing collateral. The PMM will be involved in all inquiries for MPS products from sales, applications engineers and customers via telephone or electronic communication. Travel up to 30% of the time might be necessary.Essential Functions:

• New Product Definition
• New Product Launch
• Pricing
• Competitive analysis
• Customer visits and product promotion
• Troubleshooting issues and problems
• Q & A from the field and customers
• Promotion of the products through advertising, editorials, written articles and other collateral materials 

Qualifications:

• 5-10 years experience (5 yrs minimum) in Marketing / Applications within an Analog IC Company
• Power management background is essential
• Computing background is a plus
• Excellent verbal and written communication skills
• Ability to thrive in an extremely fast-paced, start-up environment.
• BSEE or equivalent required

Location:

San Jose, CA

Job Summary:

The candidate will be responsible for all aspects of physical design and implementation. 

Physical Design Engineer will be part of design development team. The candidate will work on the digital design implementation, and verification of mixed-signal ICs utilizing standard ASIC tools. Products to be designed/verified include, power management, and mixed signal functions. 

MPS products include: switching regulators, sensors, motor control, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as broadband modems, notebooks, cell phones, telecom, fiber optics, digital camera, automobile and network equipment.

Essential Functions:

• Responsible for physical design, development, & verification of digital / mixed-signal IC’s

• Chip & block floorplan/implementation, power/clock distribution, chip assembly, P&R, STA, & LVS/DRC to closure
• Work closely with digital/analog design team for physical implementation 

Qualifications:

• Requires advance degree in Electrical Engineering/Computer Science or equivalent
• 1+ years (preferred) of Physical Digital Design experience.
• Good written/verbal communication English skills and strong team work/collaboration
• Ability to work independently, follow instructions according to design specifications, and executing tasks to hit milestones with quality

• Strong knowledge of ASIC development process and digital design techniques.

• Experience with programming, scripting and automation languages like Perl/TCL/Unix 
• Strong technical abilities & understanding in these areas:
• Verilog/SysVerilog coding.
• Synthesis, LEC, CTS, DFT, RC Extraction, and STA closure across multiple process corners.
• Physical Design Verification methodology to debug LVS/DRC issues at chip/block level
• Industry physical tools: Cadence (preferred) or Synopsys

Location:

HangZhou, China

Essential Functions 工作职责:

Qualifications 工作要求:

Engineer’s responsibilities include defining and debugging analog IC products, developing reference circuits, writing datasheets and application/design notes, and providing application support and technical training. Products are analog / mixed-signal IC’s and may include: power management, signal management and analog functions. 该职位的主要职责包括定义和调试模拟IC产品, 设计参考电路, 撰写产品规格书, 应用设计手册并且给客户提供技术培训与支持. 涉及的IC芯片包括模拟及混合信号IC, 具体包括功率管理, 信号管理IC.

Field includes 领域包含 (或):

Essential Functions 工作职责:

Qualifications 工作要求:

Responsibilities:

1. Technical support on MPS Analog and DC/DC power products.

2. Conduct product presentation and training to internal and distribution sales.

3. Serve as technical interface to customers; analyze the customer's issues, diagnose technically and solve regular application issues.

4. Feedback information about market trend, competence analysis, and new product definition.

Requirements:

1. 3 years experience in Power related industry, experience on FAE will be a plus.

2. Familiar with buck/boost/ flyback topology, experience on battery management is preferred;

3. Experience on project management, following/ tracking etc.

4. Ability to take initiative in problem solving.

5. Adaptability- ability to meet changed condition.

6. Strong sense of responsibility, self-motivated and good team spirit.

7. Bachelor's or above. Master Degree with related experience is preferred.

Responsibilities：

1. Technical support on MPS Analog and DC/DC power products.

2. Conduct product presentation and training to internal and distribution sales.

3. Serve as technical interface to customers; analyze the customer's issues, diagnose technically and solve regular application issues.

4. Feedback information about market trend, competence analysis, and new product definition.

Requirements：

1. 3 years experience in Power related industry, experience on FAE will be a plus.

2. Familiar with buck/boost/ flyback topology, experience on battery management is preferred;

3. Experience on project management, following/ tracking etc.

4. Ability to take initiative in problem solving.

5. Adaptability- ability to meet changed condition.

6. Strong sense of responsibility, self-motivated and good team spirit.

7. Bachelor's or above. Master Degree with related experience is preferred.

Responsibilities:

1. Technical support to sales team on MPS AC/DC products.2. Conduct product presentation and training to internal and distribution sales and FAEs.3. Serve as technical interface to customers; analyze the customer's issues, diagnose technically and solve regular application issues.4. Communicate customers' issues and information to Application Engineer and Marketing to help them solve the issues quickly.5. Feedback information to Marketing manager such as market trend, competence analysis, and new product definition

  Requirements:

1. Bachelors in Electrical Engineering or Computer Science/Engineering, over 3 years experience in sales/ marketing of Analog or Mix signal IC;  

2. Experience with power management is preferred;

3. Good communications skills and excellent interpersonal skills;

4. Positive and aggressive attitude;

5. Solid ability to communicate in English.

Responsibilities:

Build relationships with End Customers, distributors, FAE and Marketing team;

Manage key customers;

Use influence to achieve sales goals and objectives;

Travel a minimum of 50% of the time in related area.

Requirements: 

Bachelors in Electrical Engineering or Computer Science/Engineering, over 3 years experience in sales/ marketing of Analog or Mix signal devices and/or integrated circuits;

Must have good oral and written communications skills and excellent interpersonal skills;

Should be self starter, highly energetic, flexible, capable of making sound project decisions, and detail orientated;

Familiar with customers bases who are working on telecommunication, Notebook, motherboard, power supply or other consumer products in North China is extremely helpful and a plus;

Solid ability to communicate in English.

Responsibilities:

•    Provide technical support to customer’s evaluation/validation on MPS’ new data converter and other mixed-signal products;

•    Provide technical support to customers on application issues/problems of company’s data converter and other mixed-signal products; 

•    Assist in new analog and mixed-signal IC product definitions with design, AE, product and marketing teams.

•    Assist in IC product lab evaluation board and test system development, including evaluation board schematic and layout design, lab evaluation system development and bright up, working with design/test/AE. 

•    Assist in IC product lab evaluation testing, measurement and debug, working with design/test teams/AE. 

•    Assist in IC product production test system development and bright up, working with design/test/AE/product team.

•    Help with IC system level modeling in application environment, as well as IC product modeling for use with customers, working with design engineers, system engineers, and AE.

•    Assist in generation of product datasheets, application notes, and etc.

•    Identify and develop new business opportunities to grow MPS business, and gather potential market moves for MPS product strategy.

•    Educate and present to regional sales and customers for MPS products and technology.

Requirements：

•  Minimum B.S. in Electrical/Electronic Engineering or similar background; BSEE with 5+ years’ experience of FAE in analog and mixed-signal IC industry; have a good knowledge of analog and mixed-signal IC applications.

•    Ability to interface with customer to provide technical support/engagement; self-motivated and excellent in interpersonal skills.

•    Must possess superior problem solving and board-level debug capabilities. Prior experience in board level circuit design is preferred.

•    Hand-on experience with lab instruments and automation tools such as LabVIEW. Able to demonstrate problem solving and troubleshooting skills including lab testing and debug.

•    Proficient in both hardware implementation and software programming of FPGA/MCU in application environment.

•    Prior working experience in X-Ray imaging equipment or module (industrial/medical) developing is a plus.

•    Prior experience with data converter application and test (lab and production) is a plus.

Job Summary:

This is a senior level application engineering position within DCDC Standard product line. Products covers different power level DC-DC products, Power Management IC, etc. for both consumer and enterprise level applications. The responsibilities include solid validation & debug of products, developing reference circuits, writing application/design notes, and providing training for the field, promoting and design-in for products, resolve customer’s concern and issue, key customer engagements and defining the next generation of products,

Essential functions:

• Validation of the products
• Develop application reference circuits.
• Write datasheets, application notes, design notes.
• Provide support for key customers and field application engineers
• Drive key customers’ engagement & communications and design wins.
• Work with design engineers, field applications team, and marketing to define and debug analog/mix signal IC products.

Qualifications:

• Self-motivated, goal driven and multi-tasking
• With strong execution and time management
• 5+ years of hands-on experience in switch mode power supplies
• Fluent communication skills in English
• Excellent writing and presentation skills
• Previous experience in a power supply design house or power management IC company preferred
• MSEE or higher required

Responsibilities岗位职责:

• Establish, optimize and improve the test process, procedure and system 测试流程、系统、过程、方法等的建立，优化和改进
• Evaluate and bring in new test platform for consumer, industrial and automatic products testing 新测试平台评估、导入、改良（适用于消费级、工业级、汽车级等测试平台）
• Product test solutions optimization including hardware, program and wafer/final test parts disposition 测试方案优化（消费级，工业级，汽车级等），比如硬件，程序，物料处理
• Develop the test solution to improve test efficiency, like test site expansion, test time reduction, etc. 测试方案效率提升和优化
• Evaluate and manage all MPS turnkey test house 测试厂的评估、管理和优化

Requirements岗位要求:

• Bachelor degree or equivalent is required, major in electronics or related. 电子类专业本科或同等学历
• Need the basic knowledge of electronic components and circuits. (Analog and Digital circuit) 具备基本元件和电路知识（模电和数电）
• Familiar with C language or others. C++ is a plus. 熟悉C或其他编程语言，C++更佳
• Good English skill for reading and writing. Fluent spoken English is a plus. 英语读写流利，口语交流更佳
• Know the basis of oscilloscope and multimeter etc. 了解示波器和万用表等仪器
• Know the basis of AD10 or Cadence etc. 了解AD10或Cadence等
• Have knowledge about integrated circuit is a plus. 了解芯片相关知识更佳

Summary:

The Failure Analysis Engineer determines the root cause of IC failure by using analog semiconductor IC related knowledge and technology and combining with professional FA techniques. Once the failure root cause has been identified, the Failure Analysis Engineer works with the relative department to solve the issue and take action to prevent it happen again.

FA通过运用模拟电子半导体相关的知识、技能以及专业的失效分析技术来确定集成电路失效的根源。一旦确定失效原因，与其他相关部门共同合作解决问题并防止再次发生。

RESPONSIBILITIES:

REQUIREMENTS:

Summary:

New product development and production support

新产品开发和生产支持

RESPONSIBILITIES:

REQUIREMENTS:

研究生学历，微电子专业；本科学历，加上4年及以上半导体公司相关工作经验

Summary:

Yield enhancement engineer mainly support released products shipment, daily on hold lot disposition, fab transfer qualification, mask change qualification, bump house transfer qualification, yield improvement and product quality improvement

该职位主要支持已发布产品的收发货，日常保留批次的安排，fab厂转移条件，电路模板改变的条件，代工厂转移条件，良率提高和产品质量改进

RESPONSIBILITIES:

REQUIREMENTS:

Summary:

This position is set to support MPS new product application qualification, provide technical support for customer and take care of product related technical document.

此职位设置的目的是支���新产品的应用测试，为客户提供应用方面的技术支持和负责公司的产品规格书及应用文档

RESPONSIBILITIES:

REQUIREMENTS:

Summary:

In this position, you will work closely with circuit designers both in China and US to perform original, customized analog / mixed signal IC layout.该职位将紧密与中国区和美国区的IC设计工程师一起去完成新产品的，全定制的模拟和混合信号IC版图设计。 

RESPONSIBILITIES:

REQUIREMENTS:

Summary:

We are seeking to hire a creative and collaborative Sr. Component Engineer/Manager to join our team. Work with multi-functional teams for the power module and IC product planning, delivery, PCBA/SMT support and quality management. This role is essential to bring the products successful to the market.

RESPONSIBILITIES:

• Component and PCBA vendor management, quality control and regular audit;
• Passive components import and sourcing;
• Work with PCBA and package partners to generate the PCBA, Surface Mount (SMT)    guidelines for MPS module and IC products; 

REQUIREMENTS:

• Experiences working directly with PCBA and component suppliers;
• Understand the component management, sourcing;
• Solid knowledge on PCBA, surface mount process for QFN, LGA and BGA packages;
• Knowledge on semiconductor or power module quality management and reliability test; 
• BSEE/MSEE with 5+ years experiences of electronics industry PCBA, QA or component engineers;
• Power supply or power module industry experiences is a big plus;
• Good verbal and written skills

Summary:

Quantitatively understand stress related failure in MPS products and find optimization by FEA in trouble-shooting, predict stress risks in product design phase

RESPONSIBILITIES:

• Mechanical or thermal stress analysis on package level & board level;
• package & board level heat dissipation simulation ;
• Parametric analysis on ranking key impact factors for improved product reliability;
• provide improvement solution for IC packaging related fracture ,fatigue, warpage, interface delamination issues through FEA simulation at both early failure and long term failure stage ; 
• classify stress related failure and accordingly the failure mechanisms; 
• optimize device & package structure or design to mitigate cracking related failure from stress ,warpage ,material , and manufacturing perspective ;  

REQUIREMENTS:

• MS degree in Mechanical Engineering , Engineering Mechanics,  Materials, Physics , or solid training in mechanics ;  PhD is a plus ;  +2 years FEA working experience with BS degree  
• Strong knowledge and experience on thermal-mechanical modeling, fatigue failure modeling, and heat dissipation simulation 
• Hands-on experience of major FEA tools (e.g.,ANSYS, ABAQUS,Hypermesh, ,etc),heat dissipation simulation tools(e.g., Icepak,Flotherm,etc. )  and modeling tools (e.g., Solidworks,ProE,etc); 
• Deep understanding of packaging materials (including soldering materials ) and their mechanical behaviors 
• Good at statistical data analysis 
• Knowledge of electronic packaging structure and process ,as well as its reliability;package qualification requirement is a plus.
• Good team player , and able to perform independent research & development work;
• Good written and verbal communication skills 

Job Summary:

This FAE will provide technical support to the Detroit Area Sales and FAE team in developing potential opportunities incorporating MPS products and services. The FAE identifies and shares current and emerging customer technical needs to improve the tactical and strategic product positioning.

Essential Functions:

• Contribute to MPS US Revenue growth through direct and in-direct technical activities.
• Learn MPS power products and technology and present to customers.
• Engage with customers to understand their system power requirements.
• Provide technical support to match customer’s requirements with MPS solutions.
• Build technical relationships with engineering community.

Qualifications:

• Oral /written proficiency in English 
• Excellent communication / interpersonal skills
• BSEE or higher with 3 - 5 years work experience preferred

Location:

Detroit, MI

Product Marketing Engineer 

Job Summary:

 Engage with applications/TMEs, field sales/FAEs teams, and customers to understand system and application requirements and drive product promotion in various forms, including face to face interaction, power point presentations, online media, videos, articles, newsletter, press releases, and webinar. This job requires technical understanding of our products, their functions, key value propositions and promotion strategy for their target applications.  

Provide all areas of product marketing (tactical and non-tactical) support to the Automotive subline in the DCDC PL as well as field support to the EU region

Essential Functions/skills

• Generate marketing/promotion materials 
• Support internal/external teams will all product marketing needs
• Coordinate/run meetings with sales teams, customers to promote products
• Drive, monitor, and analyze opportunities and business related activities with subline and PL leads
• Excellent writing, presentation, and interpersonal skills

Qualifications:

• Bachelor in a technical degree with an understanding of power/semi-conductor electronics  
• Experience in Marketing / Applications engineering is a plus
• Experience in automotive market is a plus

Location:

Spain

Marketing Technical Writer Intern

During this internship as a Technical Writer and Translator, your main projects will include writing technical marketing copy in German and translating existing English language copy into German for use on our corporate website. Additionally, you will be writing semiconductor-related content for advertising, and other print and digital marketing materials. 

Writing Responsibilities include: 

• Editing and creating technical copy, applicable to semiconductor industry standards 
• Conducting internal interviews with engineers to gather data 
• Working closely with various departments to create a meaningful and consistent message for customers 
• Ensure documentation conforms to the company’s quality and assurance standards  

Translator responsibilities include: 

• Reading marketing materials and researching industry-specific terminology 
• Translating marketing text and video transcriptions from English to German 
• Ensuring translated texts conveys original meaning and tone 
• Proofreading translated texts for grammar, spelling and punctuation accuracy 
• Following-up with internal team members and the Digital Marketing Manager EMEA to ensure translation meets their goals  

Skills you need to bring to this internship: 

• BA/BS, preferably in Journalism, Translation or Communications 
• Fluency in German and English, written and spoken 
• Ability to prioritize and meet tight deadlines 
• Advanced computer skills with expert knowledge in Word, Excel, and Acrobat 
• Teamwork and cooperation 
• Time-management and organization  

Skills you will gain from this internship: 

• Valuable technical understanding of a growing Semiconductor Industry  
• Information gathering and problem-solving skills 
• Experience working with for an international, fast-growing company where you will make an impact during brand-new projects   

Overview: 

MPS is seeking a highly self-motivated engineer with strong knowledge in PMSM motor mechatronics. This person will work in supporting to introduce MPS motor solution in our potential customer, providing expertise knowledge and developing prototypes for specific applications. The engineer will collaborate with customers and design team and customers to propose novel solutions to expand current MPS portfolio.  

Essential Functions: 

· Evaluate existing MPS solution with different market’s motors applications and fine tuning the system. 

· Model and parametrize the mechatronic system. 

· Support customer around Europe and US to introduce MPS solutions 

· Develop novel motor controls (sensor-less, auto-tuning control…) with the motion control engineer. 

· Define test plans and support the development of test bench to thoroughly test all defined requirements. 

· Support the validation and prototyping of the product in collaboration with FPGA engineer 

· Support digital and analog IC team design development and validation. 

· Design evaluation board with the Technician team, to deliver a fully testable solution to MPS’s clients. 

· Write technical articles, datasheet and application notes to support client and MPS’s sales team 

Qualifications:  

• BS in related engineering field (MS preferred) + 3-5 years of industry experience in motor applications  
• Solid understanding and experience with servo motor/actuator design and motion control systems 
• Experience of modeling and control of mechatronic systems 
• Oral / written proficiency in English. German is a plus. 
• Excellent communication, interpersonal and organizational skills  

Location: Barcelona, Spain 

Job Summary: 

Designing analog and mixed-signal ICs for Power Management Products utilizing leading edge sub-micron BiCMOS /DMOS technologies. Products to be designed may include switching regulators, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as broadband modems, PDAs, notebooks, cell phones, telecom, fiber optics, digital camera, and network equipment. 

Essential Functions: 

• Works on mixed-signal power management IC design, circuit synthesis from the transistor/resistor level up to the system level, simulation, layout supervision
• Participates in the entire product development cycle, from product definition through product release 
• Assists ATE development with Design-For-Test methods 
• Oversees and mentors junior engineers 

Required skills: 

• Experience with low Iq design techniques 
• Basic understanding on the working principle of common ACDC converters, such as PFC, LLC, Flyback, Buck. 
• Experience with design and characterization of high accuracy data converters, such as delta-sigma or successive approximation (SAR) ADC. 
• Experience with high voltage (600V and above) process and product design 
• Understand analog layout techniques  
• Understand general IC qualification requirements 
• Experience with Verilog is preferred. 

Qualifications: 

• BSEE / MSEE with 5 + years of Semiconductor and/or Analog circuit design experience. 
• Good verbal and written skills.  

Job Summary: 

Designing analog and mixed-signal ICs for Power Management Products utilizing leading edge sub-micron BiCMOS /DMOS technologies. Products to be designed may include switching regulators, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as broadband modems, PDAs, notebooks, cell phones, telecom, fiber optics, digital camera, and network equipment. 

Essential Functions: 

• Works on mixed-signal power management IC design, circuit synthesis from the transistor/resistor level up to the system level, simulation, layout supervision 
• Participates in the entire product development cycle, from product definition through product release 
• Assists ATE development with Design-For-Test methods 
• Oversees and mentors junior engineers 

Required skills: 

• Experience with low Iq design techniques 
• Basic understanding on the working principle of common ACDC converters,such as PFC, LLC, Flyback, Buck. 
• Experience with design and characterization of high accuracy data converters, such as delta-sigma or successive approximation (SAR) ADC. 
• Experience with high voltage (600V and above) process and product design 
• Understand analog layout techniques  
• Understand general IC qualification requirements 
• Experience with Verilog is preferred. 

Qualifications: 

• BSEE / MSEE with 5 + years of Semiconductor and/or Analog circuit design experience. 
• Good verbal and written skills.  

Job Summary: 

As a Sr. MCU Design Engineer, you will be responsible for defining & designing architecture with feature sets for Embedded uC SoCs for Power management products. You will also be responsible to build/lead digital design team in embedded MCU SoC designs. The position requires both technical and leadership skills, while working closely with multi-disciplinary groups to drive & design key aspects of SoC feature set that meets the requirements of products. 

MPS products include: switching regulators, sensors, motor control, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as broadband modems, notebooks, cell phones, telecom, fiber optics, digital camera, automobile and network equipment. 

Essential Functions/Responsibilities: 

· Define the architecture and functional blocks for the products, with appropriate HW/SW partitioning. 

· Provide detailed technical documentation with specifications, block diagrams, and requirements to stakeholders. 

· Build/Lead the IC design team to design and verify the embedded MCU SoC designs. 

· Collaborate with software team to develop software/firmware applications. 

· Collaborate closely with different departments/stakeholders including Digital/Analog Design, Application/Test Engineering, & Reliability/Operations to resolve design, application, or test issues. 

Qualifications: 

· Broad working knowledge with uC architecture(ARM), bus structure, memory controller and MCU peripherals. 

· Proven hands-on experience in DV with embedded MCU for SoC products/applications. 

· Familiar with SoC integration and understanding mixed-signal design, analog/digital test methodologies. 

· Experience using communication protocols such as UART, I2C, SPI and USB. 

· Proficient with standard DV languages(Verilog/SysVerilog/UVM) 

· Knowledge of industry standard DV tools and embedded ARM toolchain for IC design 

· Knowledge with MCU software development. 

· 10+ year experience with MS or Ph.D degree. 

· Solid English written, verbal, & communication/collaboration skills 

· Experience in automotive IC products with functional safety knowledge preferred. 

· Experience with FPGA development and verification preferred. 

Location: 

Taipei, Taiwan   

  Position: Sr. Design Engineer 

Job Description: 

As a senior level design engineer, you will be responsible for block level analog circuit design, simulation; schematic capture; layout verification and post-layout extraction and simulation; top-level integration and verification; 

Location: Taiwan 

Requirements: 

• 3- 5 years of experience in analog and mixed-signal integrated circuit design 

• Demonstrated working silicon 

• Solid understanding of transistor level analog and digital circuit theory 

• Good analog integrated circuit implementation skills and knowledge in reducing design risk 

• Proficiency in design tools such as Cadence/Mentor 

• Solid knowledge in layout design and extraction is a plus 

· Knowledge of digital design flow, digital system, and analog/digital interface and integration is a plus 

• Experience on mixed-mode system level simulation (i.e., AMS) on SOC is a plus 

• Experience in ADC/DAC/AFE/Amplifier/Op-amp/RF design is a plus 

• Solid written & verbal communication abilities. 

• Self-motivated, willing to learn new technologies, & capable of working effectively within a talented group of individuals. 

• Minimum Master Degree (M.S. or M.Eng.) in Electrical Engineering (Ph.D. in Electrical Engineering is a plus)  

Field Sales Engineer (FSE) 

Primary functions: 

• Responsible for driving all design-in activity and wins within assigned customer accounts and geographies.  
• Responsible for consistently meeting or exceeding assigned revenue targets.
• Work closely with MPS product division marketing and engineering personnel to identify target applications/circuits to increase design wins and expand print at both new and existing customers.
• Develop and grow management level and design engineering relationships at strategic customers.  
• Identify new customer targets to engage and expand the MPS customer base.

Desired attributes:

• Self-motivated to work as an individual sales contributor in a field or home office.

• Technical ability to learn entire MPS product portfolio and the “go to market” strategy for each product line.
• Ability to engage strong sales personnel (including manufacturer representatives and channel partners)
• Strong interpersonal skills such as active listening, collaboration, problem-solving, conflict resolution, and adaptability.
• Ability to interface with MPS executive staff and product divisions to explain/defend key business strategies, revenue targets and customer situations within assigned territory.        

• Strong presentation skills to all levels of personnel (both customer and MPS internal divisions/executives.)

• Working knowledge of office tools such as Excel, Outlook, Power Point, Teams and ZOOM.
• Willingness and ability to develop conflict resolution skills between customer, sales (internal and representatives) and other MPS product and support divisions.

Requirements: 

• Technical degree (minimum bachelors), preferably in an Engineering discipline or a proven track record of success in selling electronic components for 3+ years. 
  • Will consider an experienced Field Applications Engineer or Design Engineer with the willingness to move to Sales and a strong desire to succeed.

Location: San Jose, CA and Kirkland, WA

Job Summary:

Design Engineer assists in the development of analog and mixed-signal ICs utilizing leading edge technologies. Products may include power management, signal management and analog functions.

Essential Functions:

• Contributes to the design and development of analog / mixed-signal IC’s
• Works under the supervision of Senior members of IC Design team

Qualifications:

• Master’s degree in Electrical Engineering
• Solid circuit analysis skills
• Good understanding of semiconductor device physics and IC fabrication.
• Fluent using IC design CAD tools including schematic entry, simulation and layout.
• Has the ability to follow instructions according to design specifications / procedures.
• Familiar using design lab equipment for product characterization and debug.
• Familiar with Linux working environment.

Location: Barcelona, Spain

Job Summary:  

Designing analog and mixed-signal ICs for Power Management Products utilizing leading edge sub-micron BiCMOS /DMOS technologies. Products to be designed may include switching regulators, display drivers, audio amplifiers and power management ICs for fast-growing portable and non-portable markets such as broadband modems, PDAs, notebooks, cell phones, telecom, fiber optics, digital camera, and network equipment.  

Essential Functions:  

· Works on product definition, circuit synthesis from the transistor/resistor level up to the system level, simulation, layout supervision  

· Participates in the entire product development cycle, from product definition through product release  

· Assists ATE development with Design-For-Test methods  

· Oversees and mentors junior engineers  

Required skills:  

· Experience with low Iq design techniques  

· Understand power conversion architectures such as buck, boost and etc.  

· Understand analog and mixed signal circuits including amplifies, bandgap, data converters and etc.  

· Understand power converters control schemes as such voltage mode, current mode and etc.  

· Understand analog layout techniques   

· Understand general IC qualification requirements  

Qualifications:  

· BSEE / MSEE with 5 + years of Semiconductor and/or Analog circuit design experience.  

· Good verbal and written skills.  

Location:  

North Carolina, Seattle, WA OR San Jose, CA  

Sr. Engineer, Automotive Customer Quality Engineering   

Job description

This is an important customer-facing, hands-on role in an emerging Automotive Quality organization in a rapidly growing semiconductor IC company. The key responsibilities are to work seamlessly with related Engineering, Production, Business groups and other QA functions to ensure timely responses and efficient closure of customer Quality requests, such as handling field returns/8D/FA cases, and audit support. He/she will interface to many internal functions, as well as directly with customers, in responding to requests and managing customer quality situations. As such, candidate should have a solid quality / engineering background, along with good team competence and communication skills.

Major Responsibilities

Basic Qualifications

Education Requirements Bsc EE required; Msc EE preferred