MP8760D

MP8760D

High-Efficiency, 6A, 18V, Synchronous Step-Down Converter

Datasheet

Description

The MP8760D is a fully integrated high frequency synchronous rectified step-down switch mode converter. It offers a very compact solution to achieve 6A output current over a wide input supply range with excellent load and line regulation. The MP8760D operates at high efficiency over a wide output current load range.
The MP8760D uses Constant-On-Time (COT) control mode to provide fast transient response and ease loop stabilization.
An external resistor programs the operating frequency from 200kHz to 1MHz and the frequency keeps nearly constant as input supply varies with the feedforward compensation.
The default under voltage lockout threshold is internally set at less than 4.1V, but a resistor network on the enable pin can increase this threshold. An open drain power good signal indicates that the output is within nominal voltage range.
The MP8760D employs a programmable soft start and shut-down scheme. With the soft shut-down feature, it discharges the output voltage smoothly when the enable signal is deserted.
It has fully integrated protection features that include over-current protection, over-voltage protection and thermal shutdown.
The MP8760D requires a minimal number of readily available standard external components and is available in a 3mm×4mm package.

Features & Benefits

2.5V to 18V Operating Input Range with External 5V Bias
4.5V to 18V Operating Input Range with Internal Bias
6A Output Current
Low RDS(ON) Internal Power MOSFETs
Proprietary Switching Loss Reduction Technique
Adaptive COT for Ultrafast Transient Response
1.5% Reference Voltage Over -40C to 125C Junction Temperature Range
Programmable Soft Start and Shut-down Time
Pre-Bias Start up
Output Discharge after EN Shut down
Programmable Switching Frequency from 200kHz to 1MHz
Non-latch OCP, OVP and Thermal Shutdown
Output Adjustable from 0.611V to 13V

Active Part Numbers:

MP8760DGL-P MP8760DGL-Z

Meaning of P & Z

Evaluation Tools

EV8760D-L-00A Evaluation Kit High-Efficiency, 6A, 18V Synchronous, Step-Down Converter Evaluation Board

The EV8760D-L-00A is an evaluation board for the MP8760DGL, a high-efficiency, monolithic, synchronous, step-down converter with output discharge function.

The evaluation board can deliver a continuous 6A load current over an 8V to 18V operating input range. The evaluation board can achieve high efficiency over a wide output current load range. Constant-on-time (COT) control provides fast transient response and eases loop stabilization.

This evaluation board can be turned on or shut down via a remote on/off input that is referenced to ground. This input is compatible with popular logic devices.

$25.00
+ tax