MPM3695-20

MPM3695-20

3V to 16V Input, Continuous 25A Power Module

Datasheet

Description

The MPM3695-20 is a scalable, fully integrated power module with a digital interface. The device offers a complete power solution that achieves up to 25A of continuous output current (I_OUT), with excellent load and line regulation across a wide input voltage (V_IN) range. It operates with high efficiency across a wide load range and can be paralleled to deliver a higher load current.

The MPM3695-20 adopts MPS’s proprietary, multi-phase constant-on-time (MCOT) control, which provides ultra-fast transient response and simple loop compensation. The digital interface provides module configurations and monitoring of key parameters.

The MPM3695-20 features full protection features, including over-current protection (OCP), over-voltage protection (OVP), under-voltage protection (UVP), and over-temperature protection (OTP).

The MPM3695-20 requires a minimal number of readily available external components. It is available in an ECLGA-29 (5mmx6mmx4.4mm) package.

Features & Benefits

Wide Input Voltage (V_IN) Range from 3V:
- 3V to 16V V_IN with External V_CC
- 4V to 16V V_IN with Internal V_CC
0.5V to 5.5V Output Voltage (V_OUT) Range
25A of Continuous Output Current (I_OUT)
Automatic Interleaving for Multi-Phase Operation
Automatic Compensation with Adaptive Multi-Phase Constant-On-Time (MCOT) for Ultra-Fast Transient Response
±1% Reference Voltage (V_REF) Accuracy ( -40°C to +125°C)
True V_OUT Remote Sense
Pre-Biased Output
Telemetry Readback Including V_IN, V_OUT, I_OUT, Temperature, and Faults
Built-In Multiple-Time Programmable (MTP) Memory to Store Custom Configurations
Configurable via the Digital Interface:
- Current Limit
- Pulse-Skip Mode (PSM) or Continuous Conduction Mode (CCM) Selection
- Soft-Start Time (t_SS)
- Switching Frequency (f_SW) Selection: 400kHz, 600kHz, 800kHz, or 1000kHz
- Fault Limits
- Ramp Compensation
Available in an ECLGA-29 (5mmx6mmx4.4mm) Package

Active Part Numbers:

MPM3695GPJ-20-xxxx-T MPM3695GPJ-20-0022-T MPM3695GPJ-20-3333-T

Related Products

EVM3695-20-PJ-00A 16V, 25A, High-Efficiency, Synchronous, Step-Down Module Evaluation Board

The EVM3695-20-PJ-00A evaluation board is designed to demonstrate the capabilities of the MPM3695-20, a fully integrated, high-efficiency, synchronous step-down power module with 25A of output current (I_OUT).

The MPM3695-20 adopts internally compensated constant-on-time (COT) control to provide fast transient response and ease loop stabilization. The switching frequency (f_SW) can be set between 400kHz and 1MHz. Refer to the MPM3695-20 datasheet for more detailed information.

It is recommended to read the datasheet for the MPM3695-20 prior to making any changes to the EVM3695-20-PJ-00A.

$25.00
+ tax