MPM3812

MPM3812

2.3V to 5.5V Input, 1A, PSM Power Module with an Ultra-Small Package

Description

The MPM3812 is a monolithic, step-down switch-mode converter with built-in, internal power MOSFETs and an inductor. The MPM3812 achieves up to 1A of continuous output current (I_OUT) from a 2.3V to 5.5V input voltage (V_IN) range, with excellent load and line regulation.

The MPM3812 is ideal for a wide range of applications, including high-performance digital signal processors (DSPs), wireless power, portable and mobile devices, and other low-power systems. The output voltage (V_OUT) can be regulated to as low as 0.6V. Only input capacitors, output capacitors, and feedback (FB) resistors are required to complete the design.

The constant-on-time (COT) control scheme provides fast transient response, high light-load efficiency, and easy loop stabilization.

Full protection features include cycle-by-cycle current limiting and thermal shutdown.

The MPM3812 requires a minimal number of readily available, standard external components, and it is available in an ultra-small ECLGA-6 (1.5mmx2mmx1mm) package.

Features & Benefits

Wide 2.3V to 5.5V Operating Input Voltage (V_IN) Range
Output Voltage (V_OUT) as Low as 0.6V
100% Duty Cycle in Dropout Mode
Up to 1A of Continuous Output Current (I_OUT) and 1.2A Peak I_OUT
2.4MHz Switching Frequency (f_SW)
Power-Save Mode (PSM)
Enable (EN) for Power Sequencing
Cycle-by-Cycle Over-Current Protection (OCP)
0.5ms Internal Soft-Start (SS) Time (t_SS)
Output Discharge
Short-Circuit Protection (SCP) with Hiccup Mode
Thermal Shutdown
Stable with Low-ESR Output Ceramic Capacitors
Available in an ECLGA-6 (1.5mmx2mmx1mm) Package

Active Part Numbers:

MPM3812GPH-Z MPM3812GPH-P

Meaning of P & Z

Related Products

EVM3812-PH-01A 5.5V, 1A, Ultra-Small Package, Step-Down Module with PSM Evaluation Board

The EVM3812-PH-01A evaluation board is designed to demonstrate the capabilities of the MPM3812, a fully integrated, high-efficiency, synchronous, step-down power module with up to 1A of output current (I_OUT).

The MPM3812 adopts internally compensated constant-on-time (COT) control to provide fast transient response and easy loop stabilization. The switching frequency (f_SW) is fixed at 2.4MHz. Refer to the MPM3812 datasheet for more detailed information.

It is recommended to read the MPM3812 datasheet prior to making any changes to the EVM3812-PH-01A.

$25.00
+ tax