MA302

12-Bit, Digital, Contactless Angle Sensor with ABZ & UVW Incremental Outputs

アクティブ

Datasheet

概要

The MA302 detects the absolute angular position of a permanent magnet, typically a diametrically magnetized cylinder on a rotating shaft. Fast data acquisition and processing provide accurate angle measurement at speeds from 0 to 60,000 rpm.

The MA302 supports a wide range of magnetic field strengths and spatial configurations. Both end-of-shaft and off-axis (side-shaft mounting) configurations are supported.

The MA302 features magnetic field strength detection with programmable thresholds to allow sensing of the magnet position relative to the sensor for creation of functions such as sensing of axial movements or for diagnostics.

On-chip non-volatile memory provides storage for configuration parameters, including the reference zero angle position, ABZ encoder settings, UVW pole pair emulation settings, and magnetic field detection thresholds.

機能と利点

12-Bit Resolution Absolute Angle Encoder
Contactless Sensing for Long Life
SPI Serial Interface for Digital Angle Readout and Chip Configuration
Incremental 10-Bit ABZ Quadrature Encoder Interface with Programmable Pulses Per Turn from 1 to 256
UVW Interface with 1 to 8 Pole Pair Emulation
Programmable Magnetic Field Strength Detection for Diagnostic Checks
3.3V, 12mA Supply
-40°C to +125°C Operating Temperature

Evaluation Tools

TBMA302-Q-LT-01A Evaluation Kit Long Eval Board for MA302

The TBMA302-Q-LT-01A is the long test board for the MagAlpha magnetic position sensor MA302. The sensor is mounted on the edge of the board and can therefore be used in both side-shaft and end-of-shaft configurations.

It requires the communications kit (EVKT-MACOM) and the Macom App Software (see below) to evaluate MagAlpha functionality and performance with your set-up, such as noise level, refresh rate, power-up time, and magnetic field dependence.

In addition to this long test board, there is a round format version (RD) where the sensor is mounted in the center of the board for end-of-shaft configurations.

￥1,086.50
+ tax

TBMA302-Q-RD-01A

Round Eval Board for MA302

Macom App Software

Windows Desktop Application + Drivers for the MagAlpha Communication Kit.

EVKT-MACOM

MagAlpha Communication Kit to Connect to Sensor Test Boards (TMBA) and Rotary Knob Kit, Requires Macom App Software

MPSから直接購入