MP3394S
5V-28Vin, 4-Channel, 200mA/ch Boost WLED Controller
評価ボード詳細をご覧ください。
製品説明
The MP3394S is a step-up controller with 4 current channels. It’s designed to drive WLED arrays for large-size LCD-panel backlighting applications. The MP3394S is flexible, and can expand the number of LED channels with 1 or 2 MP3394S in parallel operating from a single inductive power source. The MP3394S uses an architecture of current –mode and fixed operation frequency The frequency is programmable by an external frequency-setting resistor. MP3394S drives an external MOSFET to boost up the output voltage from a 5V to 28V input supply. It regulates the current in each LED string to the programmed value set by an external current- setting resistor. The MP3394S applies 4 internal current sources for current balance. The current matching can achieve 2.5% regulation accuracy between strings. Its low regulation voltage on LED current sources reduces power loss and improves efficiency. An external PWM input signal or DC input signal controls PWM dimming. In DC-input dimming mode, the dimming PWM signal can be generated internally and the dimming frequency is programmed by an external setting capacitor.
製品の特長
- 4-String, Max 200mA/String WLED Driver
- 5V to 28V Input Voltage Range
- 2.5% Current Matching Accuracy Between Strings
- Programmable Switching Frequency
- PWM or DC Input Burst PWM Dimming
- Open and Short LED Protection
- Programmable Over-Voltage Protection
- Cascading Capability with a Single Power Source
- Under-Voltage Lockout
- Thermal Shutdown
- TSSOP16EP, SOIC16 Package
パラメータ
- Ishutdown (µA)2
- Vin (min) (V)5
- Vin (max) (V)28
- Channels4
- fsw (min) (kHz)150
- Ichannel (max) (A)0.2
- LEDx ABS Voltage (V)55
- fsw (max) (kHz)500
- Vfb (V)0.35
- GradeCatalog
- PackageSOIC-16, TSSOP16 EP
- Power MOSFETExternal
- TopologyBoost
- Dimming (Output)P-Dim
- Iq (mA)4
- Typical LCD Screen SizesMedium (10"-29"), Large (30"-45"), Large+ (>45")
- Other FeaturesCascade
4 strings 120mA White LED Driver Evaluation Board
The EV3394S-S-00A is an evaluation board for the MP3394SGS, a step-up converter designed for liquid-crystal displays that employ an array of LEDs as the light source. It can drive up to 4 strings LEDs in parallel with 200mA/string maximum current.
The MP3394S uses external power MOSFET and internal current mode, fixed frequency architecture and includes current ballast in each string terminal, which achieves 2.5% current regulation accuracy between strings. Low feedback voltage at each LED string help reduce power loss and improve efficiency.
The MP3394S has multiple features to protect the converter from fault conditions, including under-voltage lockout, current limiting, over voltage, short LED, open LED and thermal shut-down protection.
￥10,612.00 + tax
Log in to your account
新しいアカウントを作成する