Toggle Nav
Menu
close
Cart 0
Cart

  • Cart

  • Compare Products
Select Store
EN
Advanced Search
Search
Search
code is temp removed to debug

Vin (Max) <=7V

Design Flexibility
Wide input voltage range
Less Design Work
Highly integrated e-fuses simplify designs
Scalability
Place devices in parallel for higher currents

Hot-swap controllers and e-fuses allow for safe insertion or removal of boards into an energized system. This ≤7V family provides power protection by detecting faults and limiting or cutting off current.



Show Columns
Status
MPS Inventory
Vin (min) (V)
Vin (max) (V)
Iout (max) (A)
Ilimit (A)
Iq (typ) (µA)
Channels
Enable
Fault Flag
Rds(on) (mΩ)
Slew Rate Control
Special Features
Grade
Package (mm)
MPSafe
MPL
Product URL
RESET TABLE
Vin (min) (V)
Vin (max) (V)
Iout (max) (A)
Ilimit (A)
Iq (typ) (µA)
Channels
Enable
Fault Flag
Rds(on) (mΩ)
Slew Rate Control
Special Features
Grade
Package (mm)
MPS
Active High
Active Low
Thermal Fault = Tri-State
Thermal Shutdown
Yes
Built-In ADC for Current, Voltage, and Temperature Reading
Configurable Parameters via the PMBus
PMBus Fast Mode Compliant
Parallel Configuration
Reports Power and Energy Consumption
Reverse-Current Blocking
Synchronous or Non-Synchronous Operation
Catalog
QFN-10 (3x3)
QFN-12 (2x3)
TQFN-32 (4x4)
TSOT23-8
Is MPSafe Has MPL Product URL
     
MP5013E
ACTIVE

5V, 2A, Programmable Current-Limit Switch with Over-Voltage Clamp and Slew Rate Control in a TSOT23-8

 3 5.5 5 Prog. 890 1 Active High Thermal Shutdown 36 Yes Catalog TSOT23-8 1 0 https://www.monolithicpower.com/en/mp5013e.html
MP5920
ACTIVE

Hot-Swap Controller and Energy Monitor with PMBus Interface

 3.6 10000 1 Active High
Built-In ADC for Current, Voltage, and Temperature Reading, Configurable Parameters via the PMBus, Parallel Configuration, PMBus Fast Mode Compliant, Reports Power and Energy Consumption
Catalog TQFN-32 (4x4) 1 0 https://www.monolithicpower.com/en/products/power-management/power-protection/mp5920.html
MP5018
ACTIVE

5V, 1A-5A Current Limit Switch with Reverse Current Blocking and Output Over-voltage Clamp

 Buy On MPS 4.5 5.5 5 Prog. 210 1 Active High Thermal Fault = Tri-State 45 Yes Reverse-Current Blocking Catalog QFN-12 (2x3) 1 0 https://www.monolithicpower.com/en/mp5018.html
MP5013A
ACTIVE

5V, 5A Programmable Current-Limit Switch with Over-Voltage Clamp and Slew-Rate Control in TSOT23-8

 Buy On MPS 3 5.5 5 Prog. 860 1 Active High Thermal Shutdown 36 Yes Synchronous or Non-Synchronous Operation Catalog TSOT23-8 1 0 https://www.monolithicpower.com/en/mp5013a.html
MP5017A
ACTIVE

3V to 5.5V, 1A to 5A Current Limit Switch with Over-Voltage Clamp and Reverse Blocking in a QFN-12 (2mmx3mm) Package

 Buy On MPS 3 5.5 5 Prog. 210 1 Active High Active Low 45 Yes Reverse-Current Blocking Catalog QFN-12 (2x3) 1 0 https://www.monolithicpower.com/en/products/power-management/power-protection/mp5017a.html
MP5002
NRFND
3.3V, 1A-3A Programmable Current Limit Switch
 2.5 4 3 Prog. 1500 1 Active High 44 Yes Catalog QFN-10 (3x3) 1 0 https://www.monolithicpower.com/en/products/power-management/power-protection/mp5002.html
MP5003
NRFND

3.3V, 1A-3A Programmable Current Limit Switch with Auto Enable

 2.5 6 3 Prog. 1500 1 Active High 44 Yes Catalog QFN-10 (3x3) 1 0 https://www.monolithicpower.com/en/products/power-management/power-protection/mp5003.html
MP5007
NRFND
5V, 1A- 5A Programmable Current Limit Switch
 4 6 5 Prog. 2000 1 Active High Thermal Fault = Tri-State 37 Yes Catalog QFN-10 (3x3) 1 0 https://www.monolithicpower.com/en/mp5007.html
MP5017
NRFND

3V to 5.5V, 1A to 5A Current Limit Switch with Over-Voltage Clamp and Reverse Blocking

 3 5.5 5 Prog. 210 1 Active High 45 Yes Reverse-Current Blocking Catalog QFN-12 (2x3) 1 0 https://www.monolithicpower.com/en/products/power-management/power-protection/mp5017.html
No more parts left for display.