The MPQ5031 is a USB power delivery controller compatible with Type-C 2.0 and USB PD3.0 specifications. It's target for DFP (Provider only) application, like charging only USB PD port, USB Hub.
The MPQ5031 backward supports DCP schemes for Quick Charge 3.0, Huawei FCP, Battery Charging specification (BC1.2), the Divider Mode, and 1.2V/1.2V Mode without the outside user interaction. It also supports BC1.2 CDP handshaking. I2C interface and GPIO pins provide a good communication with external power converter.
MPQ5031 supports up to 100W PD power and PPS as well. It is flexible to program the PDO list, select slave device, program charging protocols, set protection mode, and etc.
Two NTC pins can be used to monitor abnormal temperature rise, such as Type-C receptacle and PCB board. Power sharing function supports smart power budget management between two USB PD ports. PDO capability is reduced when car battery voltage is low. High voltage I/O pins support short to battery and short to VBUS protection.
The MPQ5031 is available in QFN-20(4x4mm) package with Wettable flank.
Show moreShow less
Log in to your account
Create New Account
Log in to continue
A Plus account is required to perform this action.
Log in to your myMPS+ account or create one now.
Don’t have a myMPS+ account yet?
Get early access to new products, datasheets, and free samples.