MP24830
Partial Power Buck-Boost WLED Driver ( MP24830-C470 for Backlight, MP24830 for General Lighting )
Active Part Numbers:
MP24830HS-LF-P MP24830HS-LF-Z
Meaning of P & Z 
Evaluation Tools
EV24830-S-00C Evaluation Kit 5V to 90V White LED Driver with Buck Mode and Configurable Frequency Evaluation Board
The EV24830-S-00C is designed to demonstrate the capabilities of the MP24830, a 90V white LED driver that is suitable for step-down applications. It supports a wide input range with excellent load and line regulation. Its configurable current limit provides customized applications with a wide power range. Current mode operation provides fast transient response and eases loop stabilization. Protections include thermal shutdown, cyclebycycle over-current protection (OCP), open-string protection, and output short-circuit protection (SCP).
The MP24830 incorporates both DC and PWM dimming onto a single control pin. The separate input reference ground pin allows for direct enabling and/or dimming control for positive to negative power conversion. The MP24830 is available in a SOIC-14 package.
Buck-Boost Mode White LED Driver 8V- 24V, Programmable Frequency
Buck-Boost Mode White LED Driver 5V- 90V, Programmable Frequency
MP24830 Resources
-
FLAT-PANEL TVSFlat-panel TVs, including technologies such as 4K, 8K, LCD, and OLED, are a massive consumer market. The popularization of cloud-based streaming services and smart devices have made the design requirements for these TVs more challenging than ever. Customers expect high resolution and brightness displays with exceptional audio quality and a variety of input and interface capabilities — all while ma...
-
OPTIMIZING THE DESIGN OF A FLYBACK CONVERTER FOR POELearn about the key components for designing a flyback converter for PoE.
-
SPARTAN 7 PMIC SOLUTION WITH POWER SEQUENCING FOR HIGH POWER APPLICATIONS (4-12VIN)This reference design is intended for powering AMD Xilinx Spartan7 family of FPGAs (S6 - S100). This PMIC based solution combines a small footprint with good efficiency and tight regulation for a low cost solution. The internal sequencer ensures power up and power down sequencing requirements. MP5470 PMIC has 4x bucks, Vin range 6.5V to 16V, I2C support and available in a 3x4mm QFN package. ...
-
ZYNQ7000 REFERENCE DESIGN USING PMIC MODULEThe MPS Reference design for the AMD Xilinx Zynq-7000 SoC is centered around MPM54304 Quad PMIC module with 4 outputs (3A/3A/2A/2A) and two LDO regulators to provide all power rails to Zynq SoC. MPM54304 outputs can be paralleled for design flexibility and it includes built-in power sequencing. This design can operate from a 4V-16V input supply.
-
APEC 2020 HR121X DEMOAC/DC power supply designs must meet strict performance and size requirements. This video explores the HR121x family of full digital PFC + LLC combo controllers from MPS. PFC + LLC Controllers HR1210
-
VERSAL ACAP HIGHEST EFFICIENCY ALL POWER RAIL REFERENCE DESIGN -
ZYNQ ULTRASCALE+ MPSOC 8 RAIL SMALLEST SIZE POWER MANAGEMENT REFERENCE DESIGNThis is a scalable design for powering the AMD Xilinx Zynq UltraScale+ MPSoC family (ZU2 to ZU19). This module-based solution combines a small footprint with excellent efficiency and tight regulation. An external sequencer meets power up and power down sequencing requirements.
Learn about our Evaluation Kit
Log in to your account
Create New Account