MP8758H

10A, 22V, Synchronous Step-Down Converter with Hiccup OCP, PFM/PWM Mode Selection

Datasheet

概要

The MP8758H is a fully integrated, high-frequency, synchronous, rectified, step-down converter. It offers a very compact solution to achieve a 10A output current with excellent load and line regulation over a wide input supply range. The MP8758H employs a constant-on-time (COT) control scheme, which provides fast transient response and eases loop stabilization. The COT control scheme provides a seamless transition into PFM mode at light-load operation, which boosts light-load efficiency. An open-drain power good signal indicates that the output voltage is within its nominal voltage range. Full protection features include over-current protection (OCP), over-voltage and under-voltage protection (OVP, UVP), and thermal shutdown. The MP8758H requires a minimal number of readily available, external components and is available in a QFN-21 (3mmx4mm) package.

機能と利点

Wide 4.5V to 22V Operating Input Range
10A Continuous Output Current
Low RDS(ON) Internal Power MOSFETs
Proprietary Switching Loss Reduction
Internal Soft Start
Output Discharge
500kHz Switching Frequency
PFM/PWM Mode Selection
Hiccup Mode, OCP, OVP, and UVP
Auto-Retry Thermal Shutdown
Output Adjustable from 0.604V

アクティブ部品番号

MP8758HGL-P MP8758HGL-Z

P＆Zの意味

Evaluation Tools

EV8758H-L-00A Evaluation Kit 22V, 10A, High Current Synchronous Buck Converter

The EV8758H-L-00A is used for demonstrating the performance of MP8758H, a fully-integrated, high efficiency, synchronous step-down switch mode converter. MP8758H provides up to 10A continuous output current over a wide input supply range with constant-on-time control for fast loop response.

The Evaluation Board can deliver 10A continuous load current from a 4.5V to 22V input with excellent load and line regulation.

This part requires minimum number of external components and is available in QFN21 (3mmx4mm) package

￥3,615.25
+ tax