製品
MPQ2918-AEC1

MPQ2918-AEC1

Automotive Grade. 4V-40V Input, Current Mode, Synchronous Step-Down Controller

Datasheet

概要

The MPQ2918 is a high-voltage, synchronous, step-down controller that steps down voltages directly from up to 40V. The MPQ2918 uses pulse-width modulation (PWM) current control architecture with accurate cycle-by-cycle current limiting and is capable of driving dual N-channel MOSFETs.
Advanced asynchronous mode (AAM) enables non-synchronous operation to optimize light-load efficiency.
The operating frequency of the MPQ2918 can be programmed by an external resistor or synchronized to an external clock for noise-sensitive applications. Full protection features include precision output over-voltage protection (OVP), output over-current protection (OCP), and thermal shutdown.
The MPQ2918 is available in TSSOP20-EP and QFN-20 (3mmx4mm) packages.

機能と利点

Wide 4V to 40V Operating Input Range
Dual N-Channel MOSFET Driver
0.8V Voltage Reference with ±1.5% Accuracy Over Temperature
Low Dropout Operation: Maximum Duty Cycle at 99.5%
Programmable Frequency Range: 100kHz -1000kHz
External Sync Clock Range: 100kHz -1000kHz
180° Out-of-Phase SYNCO Pin
Programmable Soft Start (SS)
Power Good (PG) Output Voltage Monitor
Selectable Cycle-by-Cycle Current Limit
Output Over-Voltage Protection (OVP)
Over-Current Protection (OCP)
Internal LDO with External Power Supply Option
Programmable Forced CCM and AAM
Available in TSSOP20-EP and QFN-20 (3mmx4mm) Packages
AEC-Q100 Grade-1

アクティブ部品番号

MPQ2918GF-AEC1-P MPQ2918GF-AEC1-Z MPQ2918GF-P MPQ2918GF-Z MPQ2918GL-AEC1-P MPQ2918GL-AEC1-Z MPQ2918GLE-AEC1-P MPQ2918GLE-AEC1-Z MPQ2918GL-P MPQ2918GL-Z

Meaning of P & Z

設計リソース