MP6001

MP6001

Flyback/Forward DC-DC Converter, 15W, Integrated 150V Power Switch

Datasheet

概要

The MP6001 is a monolithic Flyback/Forward DC-DC converter which includes a 150V power switch and is capable of delivering up to 15W output power. It can also be used for boost and SEPIC applications. The MP6001 uses the fixed-frequency peak current mode primary controller architecture. It has an internal soft-start, auto-retry, and incorporates over current, short circuit, and over voltage protection. The MP6001 can also skip cycles to maintain zero load regulation. It has a direct optocoupler interface which bypasses the internal error amplifier when an isolated output is desired. The MP6001 is ideal for telecom applications, and is available in a compact, thermally enhanced SOIC8 package with an exposed pad.

機能と利点

Integrated 0.9Ω 150V Power Switch
Cycle-by-Cycle Current Limiting
Programmable Switching Frequency
Duty Cycle Limiting with Line Feed Forward
Integrated 100V Startup Circuit
Internal Slope Compensation
Disable Function
Built-in Soft-Start
Line Under Voltage Lockout
Line Over Voltage Protection
Auto-Restart for Opened/Shorted Output
Zero Load Regulation
Thermal Shutdown

アクティブ部品番号

MP6001DN-LF-P MP6001DN-LF-Z

P＆Zの意味

Evaluation Tools

MEV6001DN-01C Evaluation Kit onolithic Buck DC-DC Converter EV Board

The EV6001DN-01C is an evaluation board for the MP6001, a monolithic Buck DCDC converter. This evaluation board is capable of delivering up to 18W output power. The MP6001 has an internal soft-start, auto-retry, and incorporates over current, short circuit, and over-voltage protection. It can also skip cycles to maintain zero load regulation. This device is available in an 8-pin SOIC package with an exposed pad.

￥3,184.00
+ tax

設計リソース

シンボル、フットプリント＆3Dモデル

30種以上のフォーマット Show more