MP3216

36V, 1.3MHz, 0.75A Step-up Converter With Output Disconnect

Datasheet

概要

The MP3216 is a monolithic step up converter integrating a 0.75A, 0.6O internal switch. The MP3216 uses current mode, fixed frequency architecture to regulate the output voltage, providing fast transient response and cycle by cycle current limit. The MP3216 includes under-voltage lockout, over voltage protection and thermal overload protection preventing damage in the event of an output overload. In addition, the MP3216 can disconnect all loads from input DC power supply. The output short circuit protection prevents the Schottky diode and IC from damage. The MP3216 is available in small 6-pin TSOT23 package.

機能と利点

Internal 0.6O Power MOSFET
Up to 36V Output Voltage
1.3MHz Fixed Switching Frequency
42V Over Voltage Shutdown
Cycle-by-Cycle Over Current Protection
UVLO, Thermal Shutdown
Output Disconnection
Output Short Protection
Available in a TSOT23-6 Package

アクティブ部品番号

MP3216DJ-LF-P MP3216DJ-LF-P MP3216DJ-LF-Z MP3216GJE-P MP3216GJE-P MP3216GJE-Z

Evaluation Tools

EV3216DJ-00A Evaluation Kit 1.3MHz, 36V Boost Converter Evaluation Board

The EV3216DJ-00A is the evaluation board for the MP3216. The MP3216 is a current mode step up converter intended for small, low power applications. The MP3216 switches at 1.3MHz and allows the use of tiny, low cost capacitors and inductors to achieve a compact solution.

The MP3216 includes under-voltage lockout, over voltage protection and thermal overload protection preventing damage in the event of an output overload. In addition, MP3216 can disconnect all loads from input DC power supply. The output short circuit protection prevents the Schottky diode and IC from damage. The MP3216 is available in small 6-pin TSOT23 package.

￥2,716.25
+ tax

MPSから直接購入