MP5446A

MP5446A

2.7V to 5.5V with Quad Peak 6A, Short EN On/Off Delay Buck Converters and Dual LDOs PMIC with I²C Interface

概要

The MP5446A is a complete power management solution that integrates high-efficiency, high-frequency, quad-output, synchronous buck converters and two low-dropout (LDO) regulators with a flexible logic interface.

The MP5446A offers a highly integrated solution that delivers up to 6A of peak output current (I_OUT) per channel, with excellent load and line regulation across a wide input voltage (V_IN) supply range. The MP5446A’s four bucks can work in parallel to provide peak 12A or 24A of output current (I_OUT). In addition, buck 1 supports remote voltage sense.

The MP5446A uses adaptive constant-on-time (COT) control to provide ultra-fast load transient response. Full protection features include under-voltage lockout (UVLO), over-voltage protection (OVP), over-current protection (OCP), and thermal shutdown.

The MP5446A integrates multi-page, one-time programmable (MOTP) memory, which supports up to four user-configurable pages, and can be selected by the PRESET pin. The output voltage (V_OUT), switching frequency (f_SW), current limit (I_LIM), and power sequence are selectable via the OTP or I²C, as are many other parameters, providing great system flexibility.

The MP5446A requires a minimal number of readily available, standard external components, and is available in a WLCSP-72 (3.4mmx3.75mm) package.

機能と利点

High-Efficiency Step-Down Converters:
- Wide 2.7V to 5.5V Input Voltage (V_IN) Range
- Output Voltage (V_OUT) Down to 0.2V
- Peak 6A Output Current (I_OUT) per Channel
- Supports Buck Parallel Operation for Peak 12A and 24A I_OUT
Integrated Bootstrap Capacitor
Internal 17mΩ and 8.5mΩ Low On Resistance (R_DS(ON)) Power MOSFETs
Buck 1 Supports Remote Sense
Configurable Switching Frequency (f_SW): 420kHz to 3MHz
Adaptive Constant-On-Time (COT) Control for Ultra-Fast Transient Response
Selectable Pulse-Frequency Modulation (PFM) Mode/Continuous Conduction Mode (CCM), Current Limit, and Protection Mode via the Multi-Page, One-Time Programmable (MOTP) Memory or I²C

Low-Dropout (LDO) Regulators:

Two Low-Noise LDOs
Output Voltage (V_OUT) Down to 0.4V
150mV Dropout at 400mA Load

System:

MPS Patented Flex-Timer Sequence Control
Integrated Watchdog Monitor: Window Mode and Q&A Mode
Alert Indicator
Configurable Soft Start (SS) and Soft Shutdown
Accurate Telemetry Readback Including V_IN, V_OUT, I_OUT, Temperature, and Faults via the I²C
Over-Current Protection (OCP), Over-Voltage Protection (OVP), Under-Voltage Protection (UVP), and Thermal Shutdown Protection
MOTP Memory with Four User OTP Pages Selectable via the PRESET Pin
Available in a WLCSP-72 (3.4mmx3.75mm) Package
Cyclic Redundancy Check (CRC) for OTP Memory and I²C Register