MPM3690-50A

MPM3690-50A

16V, Dual 25A DC/DC Power Module

Datasheet

Description

The MPM3690-50 is a dual 25A or single 50A output power module that offers a complete power solution, with excellent load and line regulation. The MPM3690-50 supports an input voltage (V_IN) range from 4V to 16V and output voltage (V_OUT) range from 0.6V to 1.8V. The voltage of MPM3690-50’s two outputs can be set separately by a single resistor per output.

The MPM3690-50 offers two configurations: the MPM3690-50A is dual 25A output and the MPM3690-50B is single 50A output. The MPM3690-50 is also pin-compatible with the MPM3690-20A/B (dual 13A or single 26A) and the MPM3690-30A/B (dual 18A or single 36A) power modules. The MPM3690-50 adopts MPS’s proprietary, multi-phase constant-on-time (MCOT) control, which provides ultra-fast transient response and minimizes output capacitance (C_OUT).

The MPM3690-50 integrates a monolithic DC/DC converter, power inductor, and other passive components, and is available in a BGA (16mmx16mmx5.18mm) package.

Features & Benefits

Dual 25A Output
4V to 16V Input Voltage (V_IN) Range
3.2V to 16V V_IN Range with External 3.3V VCC Bias
0.6V to 1.8V Output Voltage (V_OUT) Range
Constant-On-Time (COT) Control for Ultra-Fast Transient Response
Adjustable Switching Frequency (f_SW)
Adjustable Soft-Start Time (t_SS)
Over-Current Protection (OCP)
Over-Voltage Protection (OVP)
Differential Remote Sense for Both Output Channels
Pin-Compatible with the MPM3690-20A/B and the MPM3695-30A/B
Available in a (16mmx16mmx5.18mm) BGA Package

Active Part Numbers:

MPM3690GBF-50A-T

Related Products

EVM3690-50A-BF-00A 16V, Dual 25A, High-Efficiency, Synchronous Step-Down Module Evaluation Board

The EVM3690-50A-BF-00A is an evaluation board designed to demonstrate the capabilities of the MPM3690-50A, a fully integrated, high-efficiency, synchronous, dual 25A output current (I_OUT), step-down power module.

The MPM3690-50A adopts internally compensated constant-on-time (COT) control to provide fast transient response and ease loop stabilization. The operating frequency can be set between 400kHz and 1MHz by connecting a resistor between f_SET and AGND. Refer to the MPM3690-50A datasheet for more detailed information.

It is recommended to read the datasheet for the MPM3690-50A prior to making any changes to the EVM3690-50A-BF-00A.

$45.00
+ tax

MPM3690GBF-50B

16V, Single 50A DC/DC Power Module

MPM3690GBF-50D

16V, 50A, High-Efficiency DC/DC Power Module with PMBus