MP2615

2A, 1-Cell to 2-Cell Li-Ion Battery Charger in a QFN-16 (3mmx3mm) Package

Datasheet

概要

The MP2615 is a high-efficiency switch-mode battery charger suitable for 1-cell to 2- cell lithium-ion or lithium-polymer applications. The MP2615 is capable of delivering 2A of charge current programmable via an accurate sense resistor over the entire input range.
The MP2615 regulates the charge current and full battery voltage using two control loops to achieve high accuracy constant current (CC) charge and constant voltage (CV) charge.
Constant-off-time (COT) mode control allows operation up to 99% duty cycle when the battery voltage is close to the input voltage and in order to keep charge current always at a relative high level.
Battery temperature and charging status are always monitored during each charging cycle. Two status monitor output pins are provided to indicate the battery charging status and input power status. The MP2615 also features internal reverse blocking protection.
The MP2615 is available in a QFN-16 (3mmx3mm) package.

機能と利点

4.75V to 18V Operating Input Voltage
Up to 99% Duty Cycle Operation
Up to 2A Programmable Charging Current
±0.75% Full Battery Voltage Accuracy
4.1V/Cell and 4.2V/Cell Selection for Full Battery Voltage
Full Integrated Power Switches
Internal Loop Compensation
No External Reverse Blocking Diode Required
Preconditioning for Fully Depleted Battery
Charging Operation Indicator
Programmable Safety Timer
Thermal Shutdown Protection
Cycle-by-Cycle Over Current Protection
Battery Temperature Monitor and Protection

アクティブ部品番号

MP2615GQ-P MP2615GQ-Z

P＆Zの意味

Evaluation Tools

EV2615-Q-00A Evaluation Kit 2A, 1- or 2-Cell Li-Ion Battery Charger in 3mmx3mm Package

The EV2615-Q-00A is an evaluation board for the MP2615, a switching charger for 1- or 2-cell Lithium-ion or Lithium-polymer batteries, packed with built-in power MOSFETs. It is able to achieve up to 2A of charge current, which can be programmed via an accurate current-sense resistor over the whole input range.

The MP2615 regulates the charge current and full battery voltage using two control loops to realize high accuracy constant current (CC) charge and constant voltage (CV) charge. Thanks to the COT mode control, a 99% duty cycle can be achieved when the battery voltage is close to the input voltage to keep the charge current always at a relatively high level.

Battery temperature and charging status are always monitored for each condition. Two status monitor output pins are provided to indicate the battery charging status and input power status. The MP2615 also features internal reverse blocking protection.

￥3,405.25
+ tax