MPQ2166-AEC1

Automotive Grade, 6V, Dual 2A/2A or 3A/1A, Low Quiescent Current, Synchronous Buck with PG and SS

Datasheet

概要

The MPQ2166 is an internally compensated, dual, PWM, synchronous, step-down regulator that operates from a 2.7V to 6V input and generates an output voltage as low as 0.6V. The MPQ2166 can be configured as a 2A/2A or 3A/1A output current regulator and is ideal for powering portable equipment that runs on a single-cell lithium-ion (Li+) battery due to a low 60µA quiescent current. The MPQ2166 integrates dual, 55m?, high-side switches and 20m? synchronous rectifiers for high efficiency without an external Schottky diode. The MPQ2166 has peak-current-mode control and internal compensation and is capable of low dropout configurations. Both channels can operate at 100% duty cycle. Full protection features include cycle-by-cycle current limit and thermal shutdown. The MPQ2166 requires a minimum number of readily available, standard, external components and is available in QFN-18 (2mmx3mm) and QFN-18 (2.5mmx3.5mm) packages.

機能と利点

2.7V to 6V Operating Input Range
2A/2A or 3A/1A Continuous Current
55mΩ/20mΩ R_DS(ON)
Programmed Frequency up to 3MHz
External Sync Clock Up to 3MHz
180^o Phase Shifted Operation
Power Good (PG) Indicators
External Soft Start (SS) and Track
Adjustable Advanced Asynchronous Mode (AAM) or Forced Continuous Conduction Mode (FCCM)
Peak Efficiency >90%
Output Adjustable from 0.6V to 5.5V
100% Duty Cycle Operation
60µA Quiescent Current
Cycle-by-Cycle Over-Current Protection (OCP)
Short-Circuit Protection (SCP) with Hiccup Mode and Valley Current Detection
Thermal Shutdown
Available in QFN-18 (2mmx3mm) and QFN-18 (2.5mmx3.5mm) Packages
Available in a Wettable Flank Package
Available in AEC-Q100 Grade-1