MPQ6400

The MPQ6400 family is the microprocessor (µP) supervisory circuit which can monitor and provide reset function for system voltages from 0.4V. When either the SENSE voltage falls below its threshold (V_IT) or the voltage of manual reset () is pulled to a logic low, the   signal will be asserted. The reset voltage can be factory-set for standard voltage rails from 0.9V to 5V, while the MPQ6400DG-01 reset voltage is adjustable with an external resistor divider. When SENSE voltage and  exceed their thresholds, is driven to a logic high after a user-programmable delay time.

The MPQ6400 has a very low quiescent current of 1.6μA typically, which makes it ideal suitable for battery-powered applications. It provides a precision reference to achieve ±1% threshold accuracy. The reset delay time can be selected by a capacitor which is connected between C_DELAY and GND, allowing the user to select any delay time from 2.1ms to 10s. 380ms delay time is selected by connecting the C_DELAY pin to V_CC, while 24ms delay time by leaving the C_DELAY pin float. MPQ6400 is available in 2mm×2mm 6-pin QFN package.