MPQ2483A-AEC1

55V, 2.5A Programmable Frequency LED Driver with AEC-Q100 Qualified

Active

Datasheet

Description

The MPQ2483A is a 55V LED driver suitable for either step-down or inverting step up and step-down applications. It achieves a 2.5A peak current with excellent load and line regulation over a wide input supply range. The MPQ2483A incorporates both DC and PWM dimming into a single control pin. The separate input reference ground allows for direct enable and dimming control for positive-to-negative power conversion. Current-mode operation provides fast transient response and eases loop stabilization. Full protection features include cyclebycycle peak current limiting, output over-voltage protection (OVP), open-string protection, output short-circuit protection (SCP), and thermal shutdown. The MPQ2483A requires a minimal number of readily available, standard, external components and is available in 10-pin QFN (3mmx3mm) and 14-pin SOIC14 packages.

Features & Benefits

2.5A Maximum Peak Current
Buck or Buck-Boost Modes
Wide 4.5V to 55V Operating Input Range
0.28O Internal Power MOSFET Switch
Analog and PWM Dimming
0.198V Reference Voltage
5µA Shutdown Mode
Stable with Low ESR Capacitors
Cycle-by-Cycle Over-Current Protection (OCP)
Thermal Shutdown, Over-Voltage (OVP), ShortCircuit (SCP), and Open-String Protection
AEC-Q100 Qualified

Evaluation Tools

EVQ2483-S-00A Evaluation Kit 55V, Programmable Frequency White LED Driver Evaluation Board AEC-Q100 Qualified

The MPQ2483 is a 55V, white LED driver suitable for either step-down or inverting step‑up/down applications. It achieves 2.5A peak current over a wide input supply range with excellent load and line regulation. Current mode operation provides fast transient response and eases loop stabilization. Fault condition protection includes thermal shutdown, cyclebycycle peak current limiting, input over voltage protection, open strings protection and output short circuit protection.

The MPQ2483 incorporates both DC and PWM dimming onto a single control pin. The separate input reference ground pin allows for direct enable and/or dimming control for a positive to negative power conversion.

The MPQ2483 is package in SO-14.

$50.00
+ tax

Design Resources