- Evaluation Tools
- Design Resources
- Technical Forum
Peak Current Mode Boost PWM Controller with Programmable Frequency, external SS and Light Load
You have a basic account.A myMPS+ account is needed.Upgrade to myMPS+
Session Titefor popup
The MP3910 is a Peak Current Mode PWM controller that can drive an external MOSFET capable of handling more than 10A current. It has a typical operational current of 288µA and can accommodate flyback, boost for non-isolated and isolated applications.
Current mode control provides inherently simple loop compensation and cycle-by-cycle current limit, under-voltage lockout, soft-start, internal regulated supply and slope compensation are all provided to minimize the external component count.
While designed for Flyback applications, the MP3910 can also be used for other topologies including Boost, Forward and Sepic. The 1A gate driver minimizes the power loss of the external MOSFET while allowing the use of a wide variety of standard threshold devices. Additionally, MP3910 has pulse skipping mode function that improves the efficiency with light load or no load. It also provides hiccup protection for OLP, OVP and SCP condition. The MP3910 is available in MSOP10 package.
- Show more Show less
Log in to your account
Create New Account
Features & Benefits
- 5V to 35V Supply Voltage Range
- 1A 12V MOSFET Gate Driver
- External Soft-Start
- Pulse Skipping Operation with Light Load
- Programmable Switching Frequency (30kHz-to-400kHz)
- • Frequency Synchronizable from 80kHz-to-400kHz
- Cycle-by-Cycle Current Limit
- Over Voltage Protection
- Short Circuit Protection
- Over Temperature Protection
- Available in an MSOP10 Package
EV3910-K-00A Evaluation Kit Peak Current Mode PWM Controller Flyback Evaluation Board
The EV3910-K-00A evaluation board is designed to demonstrate the capabilities of the MP3910. The MP3910 is a peak current control mode PWM controller that can drives an external MOSFET capable of handling >10A current. It can accommodate flyback and boost for isolated and non-isolated applications.
While designed for flyback applications, the 1A gate driver minimizes the power loss onthe external MOSFET while allowing the use of a wide variety of standard threshold devices. In addition, the MP3910 includes pulse-skip mode, which improves the efficiency in light-load or no-load conditions. It also provides hiccup protection for OLP, OVP, and SCP conditions.
The MP3910 is available in an MSOP10 package.
Peak Current Mode PWM Controller Boost Evaluation Board