MP2698

MP2698

NOT RECOMMENDED FOR NEW DESIGNS

5V, All-in-One Power Bank Solution IC with 3.6A Boost Current and 5.0A Fast-Charging Capability

ALTERNATIVE PART

NRFND Datasheet

MP2698 continues to be in production for existing customers. Please consider this alternative for new designs:

MP2696A

I²C-Controlled, Single-Cell Switching Charger with Power-Path Management and 3.6A Boost Output

Features & Benefits

4.0V to 11V Operation Voltage Range
Up to 16V Sustainable Input Voltage
500mA to 3.6A Programmable Charge Current
3.6V to 4.45V Programmable Charge Regulation Voltage with ±0.5% Accuracy
100mA to 3A Programmable Input Current Limit with ±10% Accuracy
Minimum Input Voltage Loop for Maximum Adapter Power Tracking
Ultra-Low 25μA Battery Discharge Current in Idle Mode
Boost Converter w/ Up to 3.6A Output Current:
- Programmable Output Current Limit Loop
- Programmable Boost Output Voltage
- USB Output Cable Compensation
- Programmable Inductor Peak Current Limiting
Comprehensive Safety Features
- Fully-Customizable JEITA Profile with Programmable Temperature Threshold
- Charge Safety Timer
- Input Over-Voltage Protection
- Thermal Shutdown
- SYS Over-Current and Short Protection
- Analog Voltage Output IB Pin for Battery Current Monitoring
SYS Plug-In Detection
SYS No Load Detection
SYS DP/DM Interface for BC1.2 and Non-Standard Adapters
Status and Fault Monitoring
Available in a QFN-21 (3mmx3mm) Package

… and many more!

Description

The MP2698 is a highly integrated, flexible, switch-mode, battery charge management and system power-path management device designed for single-cell Li-ion and Li-polymer batteries for use in a wide range of portable applications.

The IC uses two operating modes, charge mode and boost mode, to manage system and battery power based on the state of the input and output.

When input power is present, the MP2698 operates in charge mode. The device detects the battery voltage automatically and charges the battery in four phases: trickle current charge, pre-charge, constant-current charge, and constant-voltage charge.

In the absence of an input source, the MP2698 switches to boost mode to power SYS from the battery. The IC supports BC1.2 output by identifying the request through DP2/DM2.

To guarantee safe operation, the IC includes input over-voltage protection (OVP), battery over-voltage protection (OVP), thermal shutdown, battery temperature monitoring, and a programmable timer to prevent the prolonged charging of an abnormal battery.

With the I²C interface, the IC can flexibly program the charging and boosting parameters, such as input current limit, charging current, battery regulation (charge-full) voltage, safety timer, boost output current limit, and so on. The IC can also provide the operation status through the I²C registers and battery status via four LEDs.

The MP2698 is available in a QFN-28 (4mmx4mm) package.

Features & Benefits

4.0V to 6.0V Operating Voltage Range
Up to 24V Sustainable Input Voltage
Input Source BC1.2 and Non-Standard Adapter Detection
Integrated Input Current-Based and Input Voltage-Based Power Management Function
Up to 5.0A Programmable Charge Current
Reverse Boost Operation Mode with up to 3.6A Boost Current and 5V Voltage for System Power
Output USB Type Detection
Analog Voltage Output IB Pin for Battery-Current Monitoring
Programmable 3.1V to 4.675V Charge Voltage with 0.5% Accuracy
Four LEDs Battery Gauge Indicators
JEITA-Compatible Negative Temperature Coefficient (NTC) Protection
Programmable Timer Back-Up Protection
Thermal Regulation and Thermal Shutdown
USB Output Cable Impedance Compensation
Integrated Short-Circuit Protection (SCP) and Over-Voltage Protection (OVP) for Pass-Through Path
Integrated SCP and OVP for Boost Mode
Integrated 8-Bit SAR ADC for Battery Voltage Measurement
Available in a QFN-28 (4mmx4mm) Package

Active Part Numbers:

MP2698GR-xxxx-P MP2698GR-xxxx-Z

Meaning of P & Z

Related Products

EVKT-USBI2C-02 Communication Interface Device USB to I²C/PMBus, included with product evaluation kit or can be purchased separately.

The EVKT-USBI2C-02 is included with product evaluation kits, or it can be purchased separately. EVKT-USBI2C-02 provides the communication interface for USB to I2C or USB to PMBus. It is designed to work with MPS I2C and PMBus products, and Virtual Bench Pro, and I2C GUI tools. USB driver will install automatically or download directly.

The EVKT-USBI2C-02 kit includes: