MP3332

NOT RECOMMENDED FOR NEW DESIGNS

2x1.5A Boost WLED Camera Flash Driver

ALTERNATIVE PART

NRFND Datasheet

MP3332 continues to be in production for existing customers. Please consider this alternative for new designs:

MP3336A

Dual-Channel, Flash LED Driver with 2A/Ch and I²C Interface

Features & Benefits

2.7V~5.5V Input Voltage
1/2/3/4MHz Selectable MaxF_sw
F_sw Fold-Back Function
400kHz I²C Compatible Interface
Standby/Flash/Assist/Indicator/5V DC Modes

Flash Mode

Up to 2A/Ch Programmable Current with ±7% Accuracy for Each LED, 7.84mA/Step

Assist Mode

Up to 319mA/Ch Programmable Current with ±7% Accuracy for Each LED, 1.25mA/Step

Indicator Mode

Works in 31.5kHz PWM Dimming Mode with 2/16, 3/16, 4/16, 5/16 Duty Cycles
Used for Blinking and 128/256/512ms Selectable Blinking Time

5V DC Mode

Output Constant 5V DC Voltage
Separated EN1 Pin for NFC Application
1A to 5.5A Programmable Input DC Current Limit Protection
External Strobe/TX Pin
VIN to VOUT Disconnection Function
Low-Battery Voltage Protection
LED Short/Open Protection
VOUT-GND Short Protection
Over-Voltage Protection (OVP)
Over-Temperature Protection (OTP)
Input Under-Voltage Lockout (UVLO) Protection
WLCSP-20 (1.6mmx2.0mm) Package

… and many more!

概要

The MP3332 is a dual-channel, flash LED driver for high-resolution camera phones. It comes in a very compact package and is highly efficient at improving image and video quality in low-light environments. The synchronous boost converter operates at 1/2/3/4MHz to provide higher efficiency and an optimized solution for smaller PCB spaces. The MP3332 features a standard I2C interface, dual LED channels, high-power density, and multiple protection features. The MP3332 supports flash, assist, torch, indicator, and 5V DC modes. To improve thermal performance, the cathodes of the dual flash LED are referenced to GND for a better layout. It is available in a WLCSP-16 (1.7mmx1.7mm) package.

機能と利点

2.7V~5.5V Input Voltage
Dual-Channel, 1.5A/Ch Flash Current with +/-7% Accuracy
1/2/3/4MHz Selectable Switching Frequency and Switching Frequency Foldback Function
400kHz I2C Compatible Interface
Standby/Flash/Assist/Torch/Indicator/5V DC Modes
Flash Mode:
Up to 1.5A/Ch Programmable Current with +/-7% Accuracy for Each LED
Assist/Torch Mode:
Up to 500mA/Ch Programmable Current with +/-7% Accuracy for Each LED
Indicator Mode:
Works in 31.5kHz PWM Operation with 2/16, 3/16, 4/16, 5/16 Duty Cycle
128ms/256ms/512ms Selectable Blinking Time
5V DC Mode:
Constant 5V DC Output
External Torch/Strobe
LED Forward-Voltage Balance to Improve Efficiency
1A to 4.2A Programmable Input DC Current-Limit Protection
Low-Battery Voltage Protection
LED Short/Open Protection
VOUT-GND Short Protection
Over-Voltage Protection (OVP)
Over-Temperature Protection (OTP)
NTC Detection and Protection
Input Under-Voltage Lockout (UVLO) Protection
Available in a WLCSP-16 (1.7mmx1.7mm) Package

アクティブ部品番号

MP3332GC-P MP3332GC-Z

P＆Zの意味

Evaluation Tools

DEV3332-C-00A Evaluation Kit ual Channel, 1.5A/Ch Flash LED Driver With I²C Interface Evaluation Board

The MP3332 is a dual-channels flash LED driver with very compact package, high efficiency for high-resolution camera phones to improve image and video quality in low light environment. The synchronous boost converter operates in 1/2/3/4MHz to provide an optimized solution for smaller PCB space and higher efficiency.

The MP3332 features standard I2C interface, dual LED channels, rich protection modes and high power density and performances. The MP3332 supports flash/assist light/torch/indicator/5V DC modes.

The cathodes of the dual flash LED are referenced to GND for better layout to improve thermal performance. It is available in WLCSP16-1.65X1.65mm package.

￥10,403.25
+ tax

設計リソース

シンボル、フットプリント＆3Dモデル

30種以上のフォーマット Show more