MP2639B

1S Cell Li-ion or Li-polymer Switching Charger Compatible with Wide Input Range andIntegrated Programmable OTG

Datasheet

概要

The MP2639B is a highly integrated, flexible switch-mode battery charging management device for a single-cell Li-ion and Li-Polymer battery used in a wide range of portable applications.

The MP2639B works in three modes: charge mode, discharge mode, and sleep mode. (See Table 1)

When the input power supply is available, the MP2639B operates as a switching charger to charge a 1S battery from a wide input power range of 5V to 16V, which can cover a USB PD voltage level. The MP2639B automatically detects the battery voltage and charges the battery in three phases: pre-charge, constant charge, and constant voltage charge. Other features include charge termination and auto-recharge.

When the input is absent, the MP2639B can provide a wide boost voltage to IN by adjusting the feedback voltage at FB. When working with the PD controller, the MP2639B can support a USB PD standard output voltage level.

To guarantee safe operation, the MP2639B limits the die temperature to a preset value of 120ºC. Other safety features include input over-voltage protection, battery over-voltage protection, thermal shutdown, battery temperature monitoring, and a programmable timer to prevent prolonged charging of a dead battery.

機能と利点

4.5V to 16V Input Voltage Range
Integrated Both Input-Current-Based and Input-Voltage-Based Power Management Functions
Up to 5A Programmable Charge Current
4.35V Charge Voltage with 0.5% Accuracy
Up to 3A Programmable Boost Output Current
Up to 16V Programmable Boost Output Voltage
Negative Temperature Coefficient Pin for Temperature Monitoring
Programmable Timer Back-Up Protection
Discharge Mode Load Trace Compensation
Thermal Regulation and Thermal Shutdown
InternalBatteryReverse Leakage Blocking
Integrated Short-Circuit Protection for Boost Mode
4 LEDsBatteryLevel and Status Indication
4mmx4mm QFN-26 Package

アクティブ部品番号

MP2639BGR-P MP2639BGR-Z

Evaluation Tools

EV2639B-R-00A Evaluation Kit Single-Cell Charger EV Board with 5A Charge Current, Wide Input & OTG

The EV2639B-R-00A is the reference design board for the MP2639B, a highly integrated, flexible, switch-mode battery charge management system for single-cell Li-ion and Li-Polymer batteries used in a wide range of applications.

The demo board shows two operating modes: charge mode and boost mode. When input power is present, the board charges a single-cell battery with a programmable charge current up to 5A. In the absence of an input source, the board switches to boost mode through the PB pin control to power the VH pin from the battery with a current up to 3A.

The evaluation board provides 4 LEDs to indicate the voltage-based fuel gauge and distinguish charge mode from boost mode.

To guarantee safe operation, the EV2639B-R-00A has input over-voltage protection, battery over-voltage protection, thermal shutdown, battery temperature monitoring, and a programmable timer to prevent prolonged charging of a dead battery.

￥5,493.00
+ tax

設計リソース