MP6606

60V, 8-Channel Low-Side Driver with Serial Interface and Fault Indication

Datasheet

Description

The MP6606 is an 8-channel low-side (LS) driver IC with a serial interface. The device integrates low-side MOSFETs (LS-FETs) and high-side (HS) clamp diodes to drive inductive loads, which makes it well-suited for unipolar stepper motor and solenoid driver applications.

The MP6606 operates from a supply voltage of up to 60V, and can deliver up to 750mA of output current (I_OUT), depending on PCB design and thermal conditions. The maximum voltage on the motor drive output pins is 60V.

Internal safety features include over-current protection (OCP), under-voltage lockout (UVLO) protection, and thermal shutdown.

The MP6606 is available in a TSSOP-20EP package with an exposed pad.

Features & Benefits

Wide 4.5V to 60V Input Voltage (V_IN) Range
60V Maximum Winding Clamp Voltage
8 Low-Side MOSFETs (LS-FETs) and Clamp Diodes
700mΩ MOSFET On Resistance (R_DS(ON))
750mA Maximum Output Current (I_OUT) when One LS-FET Is On

Active Part Numbers:

MP6606GF-Z MP6606GF-P

Meaning of P & Z

Related Products

EVKT-MOTOR-00A Communication Interface Device for USB Motor Driver Interface

The EVKT-MOTOR-00A is a communication interface device that provides an interface between a USB and a serial peripheral interface (SPI) or I²C communication interface. It is designed to work with MPS’s motor drivers that use a serial interface, as well as the motor driver programming graphic user interface (GUI) tool.

The EVKT-MOTOR-00A kit includes one USB communication device interface, one USB cable, and one 10-pin ribbon cable. Together with MPS’s Motor Driver Programming GUI, the EVKT-MOTOR-00A provides a quick and simple way to evaluate the performance of MPS motor drivers with serial interfaces.

$50.00
+ tax

EV6606-F-00A

8-Channel Low-Side Driver with Serial Interface Evaluation Board

Motor Driver Programming GUI

The Motor Driver Programming GUI can be used to configure MPS motor drivers via an SPI or I²C interface.