MP26085
Active Part Numbers:
MP26085DJ-LF-P MP26085DJ-LF-Z
Meaning of P & Z 
Evaluation Tools
EV44010-S-00B Evaluation Kit 30W Output, 85V-265V AC Input Single Stage Offline LED Driver
The EV44010-S-00B is a single stage offline evaluation board of MP44010 and MP26085 for 30W LED lighting driver.
MP44010 is a boundary conduction mode PFC controller which can provide simple and high performance active power factor correction using minimum external components.
MP26085 is a controller which can provide constant current control and over voltage protection.
The board involves LED dimming functions with two different options. One is PWM dimming and the other is 0-10V dimming.
The EV44010-S-00B can meet the Class C standard of IEC61000-3-2 and EN55015 standard.
MP26085 Resources
-
E-BIKE CHARGER REFERENCE DESIGNThe MPSB005 is an evaluation board for Lithium-ion chargers typically used in the e-Mobility applications. It also can be used as general Power Supply Unit with minimum changes. The solution is based on a PFC+LLC combo solution from a single integrated circuit with digital control (PFC). This solution offers an excellent relation performance-cost-space by avoiding the use of low frequency filters....
-
PORTABLE POWER TOOLSPortable power tools offer a wide variety of features to a range of customers from everyday consumers doing small home improvement projects to construction and maintenance professionals. Because of this, portable power tool designs often demand high flexibility and have strict power, safety, and total size requirements. Both cordless and corded power tools must be able to offer high efficiency in ...
-
USING CURRENT REGULATION IN DC MOTOR DRIVERSWhen starting a DC motor, large currents can be required that place a burden on the motor driver and power supply. This article will discuss using the current regulation function integrated into many motor driver ICs, while using examples from Monolithic Power Systems (MPS) to address high-current conditions. In many cases, using current regulation can allow designers to use a smaller motor drive...
-
MPF42790 BATTERY MANAGEMENT FUEL GAUGE SOLUTIONProviding battery pack or cell state-of-charge (SoC) information is key for good performance and customer satisfaction. However, the fact it cannot be directly measured presents challenges for engineers. The MPF42790 fuel gauge IC combines accurate readings and application-specific settings, including auto-learning capabilities, to provide accurate estimations of a batterys most important paramete...
-
MP2759 REFERENCE DESIGN - AN IMPLEMENTATION TO ADJUST ICC WITH A DIGITAL PWM SIGNAL -
MP2659 REFERENCE DESIGN: 12V LEAD-ACID BATTERY CHARGING SOLUTION -
MAGALPHA POSITION SENSOR USE CASE: POWER DRILLIn this use case, well consider the application of MagAlpha Angle Sensors for BLDC power tools. Using MPSs precision angle solution, all three Hall cells are replaced with a single MA102 Power tools are increasingly using brushless DC motors for efficiency and reliability. Traditionally, these motors have been commutated by placing three discrete Hall cells near the rotor magnet, but this requ...
-
HIGH-PERFORMANCE ANGLE, POSITION, AND CURRENT SENSINGOverview of MPS position sensors and current sensors.
-
USING MAGALPHA ROTARY MAGNETIC SENSORS IN SIDE SHAFT MODEThe previous article discussed types of magnet and their uses with MPS MagAlpha sensors in “end of shaft” mode. This article will explore the “side shaft“ mode topology. MPS MagAlpha sensors utilize an array of Hall elements in the center of the IC that sense the horizontal vector of the field from the rotating magnet. This field typically comes from a simple two-pole, diam...
-
CHOOSING THE RIGHT MAGNET FOR MAGALPHA SENSORSThe MPS MagAlpha family offers rotary Hall effect magnetic sensors that sense the position of a magnet as it rotates above or at the side of the sensor. Exact magnet sizes, shapes, and materials should be selected depending on application requirements and target costs. This article discusses tradeoffs, and how to choose the best magnet for an application. MPS MagAlpha sensors utilize an array o...
-
HIGH-PERFORMANCE BRUSHLESS DC MOTORIntegrating an MMC module into a brushless DC (BLDC) motor provides for more accurate positioning and speed control. This video shows how BLDC motors can perform better than stepper motors or servo motors with MPS's Smart Motor Module Evaluation Kits.
-
MCAR ANGLE SENSORSThe mCar is a demonstration and marketing platform for MPS hardware. It integrates MPS power and motion control components in a real, large scale system that allows MPS teams to implement and test hardware and software on a challenging application. mCar was fully developed and fabricated in-house at MPS. Learn more about themCaror visit ourautomotivecomponentspage. MA704 10-bit, High Bandwith, ...
-
ENERGY RECYCLING IN DC MOTOR DRIVESWhen decelerating a moving mass in a permanent magnet motor drive, energy stored in the mechanical system may be returned through the motor driver to the power source. If this energy is not properly accounted for, it can cause damage to the motor driver or the rest of the system by causing an increase in the power supply voltage. In this article, we will look at ways to dissipate this energy safe...
-
MP6530 3-PHASE BRUSHLESS DC MOTOR PRE-DRIVERThe MP6530 is a motor driver IC designed for driving 3-phase brushless DC motors. It’s capable of driving 3 half bridges consisting of six N-channel MOSFETs. BLDC Pre Drivers and Integrated Solutions
Learn about our Evaluation Kit
Log in to your account
Create New Account