MP2637

2.5A Single Cell Switch Mode Battery Charger with Power Path Management (PPM) and 2.4A Boost Current with Trickle Timer

Datasheet

Description

The MP2637 is a highly-integrated, flexible, switch-mode battery charger with system power path management, designed for single-cell Li-ion or Li-Polymer batteries used in a wide range of applications. The MP2637 can operate in both charge mode and boost mode to allow full system and battery power management. When input power is present, the device operates in charge mode. It automatically detects the battery voltage and charges the battery in three phases: trickle current, constant current and constant voltage. Other features include charge termination and auto-recharge. This device also integrates both input current limit and input voltage regulation in order to manage input power and meet the priority of the system power demand. In the absence of an input source, the MP2637 switches to boost mode through the MODE pin to power the SYS pins from the battery. The OLIM pin programs the output current limit in boost mode. The MP2637 also allows for output short circuit protection to completely disconnect the battery from the load in the event of a short circuit fault. Normal operation will recover as soon as the short circuit fault is removed. The MP2637 provides full operating status indication to distinguish charge mode from boost mode. To guarantee safe operation, the MP2637 limits the die temperature to a preset value of 120oC. Other safety features include input over-voltage protection, battery over-voltage protection, thermal shutdown, battery temperature monitoring, and

Features & Benefits

Up to 16V Sustainable Input Voltage
4.5V-to-6V Operating Input Voltage Range
Power Management function, Integrated Input-Current Limit, Input Voltage Regulation
Up to 2.5A Programmable Charge Current
Trickle-Charge Function
Selectable 4.2V/ 4.35V Charge Voltage with 0.5% Accuracy
Negative Temperature Coefficient Pin for Battery Temperature Monitoring
Programmable Timer Back-Up Protection
Thermal Regulation and Thermal Shutdown
Internal Battery Reverse Leakage Blocking
Integrated Over Voltage Protection and Over Current Protection for Pass-Through Path
Reverse Boost Operation Mode for System Power
Up to 2.4A Programmable Output Current Limit for Boost Mode
Integrated Short Circuit Protection and Output Over Voltage Protection for Boost Mode

Active Part Numbers:

MP2637GR-P MP2637GR-Z

Meaning of P & Z

Related Products

EV2637-R-00A Full Power Management IC for a Single-Cell Battery System

The EV2637-R-00A is the evaluation board designed to demonstrate the capabilities of MPS’s MP2637, a highly integrated, flexible, switch-mode battery charge management and system power path management device for a single-cell Li-ion and Li-Polymer battery used in a wide range of portable applications.

The EV2637 uses two operating modes, charge mode and boost mode, to allow management of system and battery power based on the state of the input. When input power is present, the board charges a single-cell battery with a programmable charge current of up to 2.5A. In the absence of an input source, the board switches to boost mode through the MODE pin to power the SYS pins from the battery with a current of up to 2.1A.

The evaluation board provides full operating status indicators to distinguish charge mode from boost mode.

To guarantee safe operation, the EV2637 has input over-voltage protection, battery over-voltage protection, thermal shutdown, battery temperature monitoring, and a programmable timer to prevent prolonged charging of a dead battery.

$25.00
+ tax