MPQ2178-AEC1

MPQ2178-AEC1

5.5V, 2A, 2.4MHz, Synchronous Step-Down Converter with Power Good and Soft Start, AEC-Q100 Qualified

Datasheet

Description

The MPQ2178 is a monolithic, step-down switch-mode converter with built-in internal power MOSFETs. It achieves 2A of continuous output current (I_OUT) across a 2.5V to 5.5V input voltage (V_IN) range, with excellent load and line regulation. The output voltage (V_OUT) can be regulated to as low as 0.6V.

The constant-on-time (COT) control scheme provides fast transient response and eases loop stabilization. Fault protections include cycle-by-cycle current limiting and thermal shutdown.

The MPQ2178 is ideal for a wide range of applications, including automotive infotainment systems, clusters, and telematics.The MPQ2178 requires a minimal number of readily available, standard external components, and is available in an ultra-small QFN-8 (1.5mmx2mm) package.

Features & Benefits

Designed for Automotive Applications

Wide 2.5V to 5.5V Operating Input Range
Up to 2A Output Current (I_OUT)
1% FB Accuracy
Junction Temperature (T_J) Operation from -40°C to +150°C

High Performance for Improved Thermals

70mΩ and 40mΩ Internal Power MOSFETs

Optimized for EMC and EMI:

2.4MHz Switching Frequency (f_SW)
FCCM across Full Load Range
MeshConnect^TM Flip-Chip Package

Optimized for Board Size and BOM:

Built-In Internal Power MOSFETs
Integrated Compensation Network
Fixed Output Options

Additional Features

EN for Power Sequencing
Power Good (PG)
100% Duty Cycle
External Soft Start (SS) Control
Output Discharge
Output Over-Voltage Protection (OVP)
Short-Circuit Protection (SCP) with Hiccup Mode
Available in a Compact QFN-8 (1.5mmx2mm) Package
Available in a Wettable Flank Package
Available in AEC-Q100 Grade 1

Active Part Numbers:

MPQ2178GQHE-Z MPQ2178GQHE-P MPQ2178GQHE-AEC1-Z MPQ2178GQHE-AEC1-P MPQ2178GQHE-12-AEC1-Z MPQ2178GQHE-12-AEC1-P MPQ2178GQHE-18-AEC1-Z MPQ2178GQHE-18-AEC1-P

Meaning of P & Z

Evaluation Tools

EVQ2178-LE-00A Evaluation Kit 5.5V, 2A, 2.4MHz, Synchronous Step-Down Converter with PG and SS Evaluation Board, AEC-Q100 Qualified

The EVQ2178-LE-00A is an evaluation board designed to demonstrate the capabilities of the MPQ2178, a monolithic, step-down, switch-mode converter with integrated internal power MOSFETs.

The EVQ2178-LE-00A achieves 2A of continuous output current (I_OUT) across a 2.5V to 5.5V input voltage (V_IN) range, with excellent load and line regulation. The output voltage (V_OUT) can be regulated to as low as 0.6V.

Fault protections include cycle-by-cycle current limiting and thermal shutdown. The EVQ2178-LE-00A is a fully assembled and tested evaluation board. It generates a 1.2V V_OUT at load currents up to 2A across a 2.5V to 5.5V V_IN range.

The MPQ2178 is available in a compact QFN-8 (1.5mmx2mm) package.

$50.00
+ tax

Buy direct from MPS