MP3336A

MP3336A

Dual-Channel, Flash LED Driver with 2A/Ch and I²C Interface

Datasheet

Description

The MP3336A is a compact, dual-channel, high-power, flash LED driver that can drive up to 2A in flash mode for each LED. The MP3336A improves image and video quality in low light environments for camera phones. The MP3336A operates with a selectable 1/2/3/4MHz switching frequency and uses a synchronous, current-mode PWM boost converter to regulate the LED current with two high current sources. The MP3336A provides a highly efficient, optimized solution for smaller PCB spaces.

The MP3336A features a standard I²C interface, dual LED channels, rich protection modes, and high power density and performance. The MP3336A can also support flash, assist, indicator, and 5V DC modes.

The cathodes of the dual-flash LED are referenced to GND, which improves thermal performance in layout. The MP3336A is available in a WLCSP-20 (1.6mmx2.0mm) package.

Features & Benefits

2.7V~5.5V Input Voltage
1/2/3/4MHz Selectable MaxF_sw
F_sw Fold-Back Function
400kHz I²C Compatible Interface
Standby/Flash/Assist/Indicator/5V DC Modes

Flash Mode

Up to 2A/Ch Programmable Current with ±7% Accuracy for Each LED, 7.84mA/Step

Assist Mode

Up to 319mA/Ch Programmable Current with ±7% Accuracy for Each LED, 1.25mA/Step

Indicator Mode

Works in 31.5kHz PWM Dimming Mode with 2/16, 3/16, 4/16, 5/16 Duty Cycles
Used for Blinking and 128/256/512ms Selectable Blinking Time

5V DC Mode

Output Constant 5V DC Voltage
Separated EN1 Pin for NFC Application
1A to 5.5A Programmable Input DC Current Limit Protection
External Strobe/TX Pin
VIN to VOUT Disconnection Function
Low-Battery Voltage Protection
LED Short/Open Protection
VOUT-GND Short Protection
Over-Voltage Protection (OVP)
Over-Temperature Protection (OTP)
Input Under-Voltage Lockout (UVLO) Protection
WLCSP-20 (1.6mmx2.0mm) Package

Active Part Numbers:

MP3336AGC-P MP3336AGC-Z

Meaning of P & Z

Evaluation Tools

EVKT-USBI2C-02 Evaluation Kit Communication Interface Device USB to I²C/PMBus, included with product evaluation kit or can be purchased separately.

The EVKT-USBI2C-02 is included with product evaluation kits, or it can be purchased separately. EVKT-USBI2C-02 provides the communication interface for USB to I2C or USB to PMBus. It is designed to work with MPS I2C and PMBus products, and Virtual Bench Pro, and I2C GUI tools. USB driver will install automatically or download directly.

The EVKT-USBI2C-02 kit includes: