Overview
Evaluation Tools
Design Resources
Technical Forum
Quality

HFC0500

Fixed Frequency Flyback Controller with Ultra-low No Load Power Consumption

Active

Datasheet

Description

HFC0500 is a fixed-frequency current-mode controller with internal slope compensation. It is specifically designed for the medium-power, off-line, flyback, switch-mode power supplies. HFC0500 is a green-mode highly efficient controller. At light loads, the controller freezes the peak current and reduces its switching frequency down to 25kHz to offer excellent light-load efficiency. At very light loads, the controller enters burst mode to achieve very low standby power consumption. HFC0500 offers frequency jittering to help dissipate energy generated by conducted noise. HFC0500 employs overpower compensation function to narrow the difference of over power protection point between low line and high line. HFC0500 also has X-cap discharge function to discharge the X-cap when the input is unplugged. This aids in lowering no load power. HFC0500 features multiple protections that include thermal shutdown (TSD), VCC under-voltage lockout (UVLO), overload protection (OLP), over-voltage protection (OVP), and brown-out protection. HFC0500 is available in an SOIC8-7A package.

Features & Benefits

Fixed-frequency current-mode control with internal slope compensation
Frequency foldback down to 25kHz at light loads
Burst mode for low standby power consumption, meeting EuP Lot 6
Frequency jitter to reduce EMI signature
X-cap discharge function
Adjustable overpower compensation
Internal high-voltage current source
VCC under-voltage lockout with hysteresis (UVLO)
Brown-out protection on HV
Overload protection with programmable delay
Thermal shutdown (auto-restart with hysteresis)
Latch-off for external over-voltage protection (OVP) and over-temperature protection (OTP) on TIMER
Latch-off for Vcc over voltage protection
Short-circuit protection
Programmable soft start

Evaluation Tools

EVHFC0500+MP6902/5017-00A Evaluation Kit 85VAC~265VAC/50Hz/60Hz, 5.3V/10A 4 USB Ports Evaluation Board

The EVHFC0500+MP6902+MP5017-00AEvaluation Board is mainly designed to demonstrate the capabilities of MPS flyback controller and secondary synchronous rectifier (SR) driver. The HFC0500 is a full-featured flyback controller aims at high-performance and high-integration solution while MP6902 is a secondary synchronous rectifier driver, which can promote converter efficiency observably. MP5017 is a current limiter to protect circuit.

The EVHFC0500+MP6902+MP5017-00A is typically designed for cell phone charger with 4 USB ports, each port has 2.4A source capability and input is from 85VAC to 265VAC, 50HZ/60HZ.

The EVHFC0500+MP6902+MP5017-00A has excellent efficiency, which can meet CoC V5 and DoE Level Ⅵ requirement easily. It meets IEC61000-4-5 surge immunity and EN55022 conducted EMI requirements. It has multi-protection function, e.g., Brown In/Out, over load protection, over voltage protection, short-circuit protection, cycle by cycle current limit and over-temperature protection, etc.

$25.00
+ tax

Design Resources