Products
MP8869W

MP8869W

High-Efficiency, 12A, 18V, Synchronous Step-Down Converter with I²C Interface

Datasheet

Description

The MP8869W is a high-frequency, synchronous, rectified, step-down, switch-mode converter with I²C control interface. It offers a fully integrated solution to achieve a 12A continuous and 15A peak output current with excellent load and line regulation over a wide input supply range. In the I²C control loop, the output voltage level can be controlled on the fly through an I²C serial interface. The voltage range can be adjusted from 0.6V to 1.55V in 7.5mV steps. The voltage slew rate, frequency, current limit, hiccup/latch-off protection, enable, and power savings mode are also selectable through the I²C interface. COT control operation provides fast transient response. An open-drain power good pin indicates that the output voltage is in the nominal range. Full protection features include over-voltage protection, over-current protection, and thermal shutdown. The MP8869W is available in a QFN-14 (3mmx4mm) package.

Features & Benefits

Wide, 3V to 18V Operating Input Range
12A Continuous/15A Peak Output Current
1% Internal Reference Accuracy
I²C Programmable Output Range from 0.6V to 1.55V in 7.5mV Steps with Slew Rate Control
5% Accuracy Output Voltage and Output Current Read Back via I²C
Selectable PFM/PWM Mode and Adjustable Frequency & Current Limit through I²C
4 Different Selectable I²C Addresses
External Soft Start
Open-Drain Power Good Indication
Output Over-Voltage Protection
Hiccup/Latch-Off OCP Protection
QFN-14 (3mmx4mm) Package

Active Part Numbers:

MP8869WGL-P MP8869WGL-Z

Evaluation Tools

EVKT-8869W Evaluation Kit 3V-18V, 12A, High-Efficiency, Wide-Input, Synchronous, Step-Down Converter

The MP8869W is a high-frequency, synchronous, rectified, step-down, switch-mode converter with an I2C control interface. The MP8869W offers a fully integrated solution that achieves 12A of continuous and 15A of peak output current with excellent load and line regulation over a wide input supply range.

Highly customizable, the MP8869W is capable of supporting a diverse array of applications. Users can program it via MPS I2C GUI; however, changes made in I2C mode will not be retained once the EVB is powered down.

The EVKT8869W is a valuable evaluation tool well-suited for all types of experience levels, from beginner to expert, and can help users quickly determine if the MP8869W is right for their target application.

$75.00
+ tax

EV8869W-L-00A

High Efficiency, 12A, 17V, Synchronous Step-Down Converter with I2C Interface

MP88xx I2C GUI

Configure multiple parameters of the MP88xx including output voltage and fsw.

EVKT-USBI2C-02

Communication Interface Device USB to I²C/PMBus, included with product evaluation kit or can be purchased separately.

Buy direct from MPS