MPQ4485-AEC1

MPQ4485-AEC1

36V, 6A, Step-Down Converter with Dual USB Charging Ports Supporting Type-C 5V @ 3A DFP Mode and BC1.2 CDP Mode for Automotive, AEC-Q100 Qualified

Datasheet

Description

The MPQ4485 integrates a monolithic, step-down, switch-mode converter with two USB current-limit switches and charging port identification circuitry. The MPQ4485 achieves 6A of output current with excellent load and line regulation over a wide input supply range.
The output of the USB switch is current-limited. USB1 supports DCP schemes for battery charging specification (BC1.2), divider mode, 1.2V/1.2V mode, and USB Type-C 5V @ 3A DFP mode, eliminating the need for outside user interaction. USB2 supports DCP and CDP schemes.
Full protection features include hiccup current limiting, output over-voltage protection (OVP), and thermal shutdown.
The MPQ4485 requires a minimal number of readily available, standard, external components and is available in a QFN-26 (5mmx5mm) package.

Features & Benefits

Wide 6V to 36V Operating Input Voltage Range
Fixed 5.17V Output Voltage
90mV Line Drop Compensation
Accurate USB1/USB2 Output Current Limit
18mΩ/15mΩ Low RDS(ON) Internal Buck Power MOSFETs
18mΩ/18mΩ Low RDS(ON) Internal USB1/USB2 Power MOSFETs
450kHz Switching Frequency
Forced CCM Operation
Load Shedding versus Temperature for MPQ4485GU-LS-AEC1
USB Output Over-Voltage Protection (OVP)
Fast Over-Current Response for USB Switch
Hiccup Current Limit
Supports DCP Schemes for BC1.2, Divider Mode, and 1.2V/1.2V Mode
USB1 Supports USB Type-C 5V @ 3A Mode, USB2 Supports CDP Mode
±8kV HBM ESD Rating for USB, DP, DM, DP_OUT, and DM_OUT
Available in a QFN-26 (5mmx5mm) Package
Available in AEC-Q100 Grade 1

Active Part Numbers:

MPQ4485GU-AEC1-P MPQ4485GU-AEC1-Z MPQ4485GU-LS-AEC1-P MPQ4485GU-LS-AEC1-Z

Meaning of P & Z

Related Products

EVQ4485-U-00A Step-Down Converter with Dual USB Charging Ports Supporting Type-C 5V@3A DFP Mode and BC1.2 CDP Mode for Automotive, AEC-Q100 Qualified

The MPQ4485 integrates a monolithic step-down switch-mode converter with two USB current-limit switches and charging port identification circuit. It achieves 6A output current over a wide input-supply range with excellent load and line regulation.

The output of the USB switch is current limited. USB1 supports DCP scheme for Battery Charging specification (BC1.2), the Divider Mode, 1.2V/1.2V Mode and USB TYPE-C 5V@3A DFP Mode eliminating outside user interaction. USB2 supports DCP/CDP schemes.

Fault condition protection includes hiccup current limiting, output OVP, and thermal shutdown (TSD).

$25.00
+ tax