NOT RECOMMENDED FOR NEW DESIGNS
MP5006 continues to be in production for existing customers. Please consider this alternative for new designs:
5V, 5A Programmable Current-Limit Switch with Over-Voltage Clamp and Slew-Rate Control in TSOT23-8
Features & Benefits
- 3 V to 5.5 V Operating Input Range
- 5.7 V Typical Output Over-Voltage Clamp
- Absolute Maximum Voltage of 22 V
- Input Under-Voltage Lockout
- Low Inrush Current during Start-Up
- Integrated 36 mΩ Power FET
- Enable/Fault Pin
- Adjustable Output Voltage Slew Rate
- Adjustable Current Limit
- Thermal Shutdown Protection
- TSOT23-8 Package
… and many more!
Active Part Numbers:
Meaning of P & Z
ACCURATE CURRENT MEASUREMENT IN MODERN ELECTRONIC CIRCUITS
As power electronic switching techniques advance, there is an increased need to accurately measure current for feedback control and system monitoring. There are several methods to achieve this, with each method having advantages and limitations. This article focuses on current measurement methods that require relatively high accuracy and bandwidth, such as those used to measure current on the inpu...
HIGHLY INTEGRATED, SCALABLE, CURRENT-SHARING HOT-SWAP SOLUTION FOR 48V DATACENTER APPLICATIONS
Servers and racks used in datacenters have undergone a considerable increase in power, going from a few hundred watts to multiple kilowatts. The distribution of these higher power levels on multiple servers inevitably generates greater power losses and hinders efficiency. This aspect can be mitigated by transiting from a traditional 12V distribution voltage to 48V. The increase in distribution vo...
SCALABLE CURRENT-SHARING E-FUSE SOLUTION
In typical hot-swap or electronic fuse (e-fuse) applications, great care must be taken when selecting the MOSFET to ensure that the safe operating area (SOA) of the device is not exceeded during a soft-start (SS) turn-on. Even if multiple MOSFETs are paralleled, the soft-start condition causes large amounts of thermal stress. Generally, when using discrete MOSFETs in hot-swap and e-fuse applicati...
Log in to your account
Create New Account