MPM54504

16V, Quad DC/DC Power Module with 4x 5A Output Array

Datasheet

Description

The MPM54504 is a 16V input, quad-output step-down power module. The device can provide up to 5A of continuous output current per output, with excellent load and line regulation across a wide input range.

The MPM54504 has internal auto-compensation, which means that external compensation components are not required. The output voltage is adjustable from 0.6V to 5.5V and can be set via a single resistor.

Constant-on-time (COT) control provides ultra-fast transient response and eases loop stabilization. Full protection features include over-current protection (OCP), short-circuit protection (SCP), under-voltage lockout (UVLO), over-voltage protection (OVP), and thermal shutdown.

The MPM54504 integrates a monolithic power stage, inductors, and supports passive components for high efficiency. It is available in a BGA (9mmx15mmx5mm) package.

Features & Benefits

Quad-Output Step-Down Power Module with 5A per Output
Wide 3V to 16V Input Voltage Range
0.6 to 5.5V Output Voltage
5A Output Current per Channel
Fixed 1MHz Switching Frequency
Constant-On-Time (COT) Control for Fast Transient, No External Compensation Required
External Configurable Soft Start-Up Time
EN and Power Good for Power Sequencing
OVP, UVP, OCP, SCP, and OTP
Available in a BGA (9mmx15mmx5mm) Package

Active Part Numbers:

MPM54504GBS-T

Related Products

EVM54504-BS-00A 5A, 16V, 4-Channel Output, Step-Down Power Module with Internal Auto-Compensation Evaluation Board

The EVM54504-BS-00A is an evaluation board designed to demonstrate the capabilities of the MPM54504, a four-channel output, step-down power module. Each channel can deliver up to 5A of continuous output current (I_OUT) across a wide input voltage (V_IN) range (3V to 16V), with excellent load and line regulation.

The MPM54504 integrates monolithic power stages and inductors that support passive components to achieve high efficiency. It also features internal auto-compensation, and does not require any external compensation components. Constant-on-time (COT) control provides fast load transient response, simple loop design, and tight output regulation.

The MPM54504’s protection features include short-circuit protection (SCP), over-current protection (OCP), over-voltage protection (OVP), under-voltage protection (UVP), over-temperature protection (OTP), and thermal shutdown (TSD). The MPM54504 is available in an FCMBGA (9mmx15mmx5mm) package.

$25.00
+ tax