MPM3807C-AEC1

5.5V, 2A, 2.4MHz, Synchronous Step-Down Module, AEC-Q100 Qualified

Description

The MPM3807C is an easy-to-use, fully integrated, synchronous step-down power module with a built-in inductor and MOSFET switches. The device can achieve up to 2A of continuous output current (I_OUT), with excellent load and line regulation.

The constant-on-time (COT) control scheme provides fast transient response and eases loop stabilization. Fault protections include cycle-by-cycle current limiting and thermal shutdown. An open-drain power good (PG) signal indicates whether the output voltage (V_OUT) exceeds 90% of its nominal voltage.

The MPM3807C is well-suited for a wide range of applications including high-performance digital signal processors (DSPs), advanced driver-assistance system (ADAS) sensors, portable and mobile devices, and other low-power, space-constrained systems.

The MPM3807C requires a minimal number of readily available, standard external components. It is available in a small QFN-15 (3mmx4mmx1.6mm) package.

Features & Benefits

Designed for Automotive Applications:
- Wide 2.5V to 5.5V Operating Input Voltage (V_IN) Range
- Up to 2A Output Current (I_OUT)
- 1% Feedback (FB) Accuracy
- -40°C to +150°C Operating Junction Temperature (T_J) Range
- Available in AEC-Q100 Grade 1
High Performance for Improved Thermals:
- 70mΩ and 40mΩ Integrated Internal Power MOSFETs
Optimized for EMC and EMI Reduction:
- Forced Continuous Conduction Mode (FCCM) across the Full Load Range
- 2.4MHz Switching Frequency (f_SW)
- MeshConnect^TM Flip-Chip Package
Optimized for Board Size and BOM:
- Integrated Internal Power MOSFETs
- Integrated Compensation Network
- Available in a QFN-15 (3mmx4mmx1.6mm) Package
- Fixed Output Options: 0.8V, 1V, 1.1V, 1.2V, 1.25V, 1.5V, 1.8V, 2.5V, 2.8V, and 3.3V
Additional Features:
- Enable (EN) for Power Sequencing
- Power Good (PG)
- 100% Duty Cycle
- External Soft Start (SS) Control
- Output Discharge
- Output Over-Voltage Protection (OVP)
- Short-Circuit Protection (SCP) with Hiccup Mode
- Available in a Wettable Flank Package

Active Part Numbers:

MPM3807CGLE-AEC1-Z MPM3807CGLE-AEC1-P MPM3807CGLE-12-AEC1-Z MPM3807CGLE-12-AEC1-P MPM3807CGLE-18-AEC1-Z MPM3807CGLE-18-AEC1-P

Meaning of P & Z

Design Resources

Symbol, Footprint & 3D Model

30+ more formats Show more

Symbols (36)

Footprint (34)

3D Models (15)

EDA model is not yet available for this part.

Please enter your email address and we will notify you when it is released.

Request Received

Buy direct from MPS

Standard Pricing

Out of stock

MPM3807C-AEC1