MP62260-1

NOT RECOMMENDED FOR NEW DESIGNS

3.3V/5V, Single-Channel 2A Current-Limited Power Distribution Switch with Output Discharge

ALTERNATIVE PART

NRFND Datasheet

MP62260-1 continues to be in production for existing customers. Please consider this alternative for new designs:

MP5073GG-Z

2A, 5.5V load switch with Programmable current limit, PG, slew rate control and output discharge

Features & Benefits

Integrated 50mΩ Low RDSON FETs
Adjustable Start Up Slew Rate
Wide VIN Range from 0.5V to 5.5V
<1µA Shutdown Current
Typical 2A Current Limit Range
Power Good Indicator
Output Discharge function
Enable Pin
<200ns Short-Circuit Protection Response Time
Thermal Protection
Small QFN-12 (2mmx2mm) Package for Space Saving

… and many more!

Description

The MP62260-1/MP62261-1 Power Distribution Switch features internal current limiting to prevent damage to host devices due to faulty load conditions. The MP62260-1/MP62261-1 operates from 2.7V to 5.5V nominal input voltage and includes a 45mΩ Power MOSFET to handle up to 2A continuous load with a 3A typical current limit. The MP62260-1/MP62261-1 has built-in protection for both over current and increased thermal stress. For over-current protection (OCP), the device will limit the current by going into a constant current mode. When continuous output overload condition exceeds power dissipation of the package, the thermal protection will shut the part off. The device will recover once the device temperature reduces to approx 120°C. The MP62260-1/MP62261-1 involves output discharge function that provides a resistive discharge path for the external output capacitor when the part is disabled. The MP62260-1/MP62261-1 is available in SOIC8 package.