MP5036A
5V, 0.4A to 5A Current Limit Switch with 5.75V Over-Voltage Clamp

Product Description
The MP5036A is a protection device designed to protect circuitry on the output from transients on the input, while simultaneously protecting the input from undesired shorts and transients from the output.
The DV/DT pin controls the slew rate at the output. The slew rate limits the inrush current during start-up.
The maximum load at the output is current-limited. The magnitude of the current limit is controlled by an external resistor from ILIMIT to GND. There is a fixed, 2.5A current limit when floating the ILIMIT pin.
The output voltage is limited by the output’s over-voltage protection (OVP) function.
The device is available in a TSOT23-6 package.
Product Features
- Wide 2.9V to 5.5V Continuous Operating Input Range
- 26V Absolute Maximum Transient Input Voltage
- Fixed 5.75V Over-Voltage Clamp Threshold
- Fast Output OVP Response
- Integrated 43mΩPowerFET
- Adjustable Current Limit or Fixed Current Limit when Floating ILIMIT Pin
- Soft-Start Time Programmable through DV/DT Pin
- Fast Response for Hard Short Protection
- OCP Hiccup Protection
- Thermal Shutdown and Auto-Retry
- Available in a TSOT23-6 Package
Parametrics
- Output DischargeNo
- EnableActive High
- Ilimit (A)Prog.
- Rds(on) (mΩ)43
- GradeCatalog
- Channels1
- Iq (typ) (µA)50
- Slew Rate ControlYes
- Iout (max) (A)5
- Vin (max) (V)5.5
- Special FeaturesOutput Discharge
- Vin (min) (V)2.9
- PackageTSOT23-6

5V, 0.4A-5A Current Limit Switch with Over Voltage Clamp
The EV5036A-J-00A Evaluation Board is designed to demonstrate the capabilities of MPS’ MP5036A, a protection device designed to protect circuitry on the output from transients on input. It also protects input from undesired shorts and transients coming from the output. MP5036A is a small RON, low quiescent current, current limited switch.
At startup, the inrush current is limited by limiting the slew rate at the output. The slew rate is controlled by a capacitor at the DV/DT pin.
The maximum load at the output is current limited. The magnitude of the current limit is controlled by an external resistor from ILIMIT to GND. There is a fixed 2.5A current limit when floating ILIMIT pin.
The output voltage is limited by the output over voltage protection (OVP) function.
The MP5036A is available in a space-saving 8 pin-TSOT23-6 package.
$25.00 + tax
Log in to your account
Create New Account