MP5036
12V, 0.4A to 5A, Current Limit Switch with 15V Over-Voltage Clamp in TSOT23 Package
Active Part Numbers:
MP5036GJ-P MP5036GJ-Z
Meaning of P & Z
Related Products

EV5036-J-00A 12V, 0.4A-5A Current Limit Switch with Over Voltage Clamp
The EV5036-J-00A Evaluation Board is designed to demonstrate the capabilities of MPS’ MP5036, a protection device designed to protect circuitry on the output from transients on input. It also protects input from undesired shorts and transients coming from the output. MP5036 is a small RON, low quiescent current, current limited switch.
At startup, the inrush current is limited by limiting the slew rate at the output. The slew rate is controlled by a capacitor at the DV/DT pin.
The maximum load at the output is current limited. The magnitude of the current limit is controlled by an external resistor from ILIMIT to GND. There is a fixed 2.5A current limit when floating ILIMIT pin.
The output voltage is limited by the output over voltage protection (OVP) function.
The MP5036 is available in a space-saving 8 pin-TSOT23-6 package.
Log in to your account
Create New Account