MPQ2177A-AEC1

MPQ2177A-AEC1

5.5V, 1A, 2.4MHz, Synchronous Step-Down Converter with Power Good and Soft Start, AEC-Q100 Qualified

Datasheet

Description

The MPQ2177A is a monolithic, step-down switch-mode converter with integrated internal power MOSFETs. It can achieve up to 1A of continuous output current (I_OUT) across a 2.5V to 5.5V input voltage (V_IN) range, with excellent load and line regulation. The output voltage (V_OUT) can be regulated to as low as 0.6V.

The MPQ2177A is ideal for a wide range of applications, including automotive clusters, telematics, and infotainment systems.

Constant-on-time (COT) control provides fast transient response and eases loop stabilization. Full protection features include cycle-by-cycle current limiting and thermal shutdown.

The MPQ2177A requires a minimal number of readily available, standard external components, and is available in a compact QFN-8 (1.5mmx2mm) package.

Features & Benefits

Designed for Automotive Applications:
- Wide 2.5V to 5.5V Operating Input Voltage (V_IN) Range
- Up to 1A Output Current (I_OUT)
- 1% Feedback (FB) Accuracy
- -40°C to +150°C Operating Junction Temperature (T_J) Range
- Available in AEC-Q100 Grade 1
Increased Battery Life:
- 21μA Sleep Mode Quiescent Current (I_Q)
- Advanced Asynchronous Modulation (AAM) Mode for Increased Efficiency under Light-Load Conditions
High Performance for Improved Thermals:
- 75mΩ and 45mΩ Integrated Internal Power MOSFETs
Optimized for EMC and EMI:
- 2.4MHz Switching Frequency (f_SW)
- MeshConnect™ Flip-Chip Package
Reduced Board Size and BOM:
- Integrated Internal Power MOSFETs
- Integrated Compensation Network
- Available in a Compact QFN-8 (1.5mmx2mm) Package
Additional Features:
- Enable (EN) for Power Sequencing
- Power Good (PG)
- 100% Duty Cycle
- External Soft Start (SS) Control
- Output Discharge
- Over-Voltage Protection (OVP) with Hiccup Mode
- Short-Circuit Protection (SCP) with Hiccup Mode
- Available in a Wettable Flank Package