MP6002

MP6002

Flyback/ Forward DC-DC Converter, 30W, Integrated 150V Power Switch.

Datasheet

Description

The MP6002 is a monolithic Flyback/Forward DC-DC converter which includes a 150V power switch and is capable of delivering up to 30W output power. It can also be used for boost and SEPIC applications. The MP6002 uses the fixed-frequency peak current mode primary controller architecture. It has an internal soft-start, auto-retry, and incorporates over current, short circuit, and over voltage protection. The MP6002 can also skip cycles to maintain zero load regulation. It has a direct optocoupler interface which bypasses the internal error amplifier when an isolated output is desired. The MP6002 is ideal for telecom applications, and is available in a compact, thermally enhanced SO8 package with an exposed pad.

Features & Benefits

Integrated 0.45Ω 150V Power Switch
Cycle-by-Cycle Current Limiting
Programmable Switching Frequency
Duty Cycle Limiting with Line Feed Forward
Integrated 100V Startup Circuit
Internal Slope Compensation
Disable Function
Built-in Soft-Start
Line Under Voltage Lockout
Line Over Voltage Protection
Auto-Restart for Opened/Shorted Output
Zero Load Regulation
Thermal Shutdown

Active Part Numbers:

MP6002DN-LF-P MP6002DN-LF-Z

Meaning of P & Z

Evaluation Tools

EV6002DN-00A Evaluation Kit Monolithic Flyback/Forward DC-DC Converter Evaluation Board

The EV6002DN-00A is an evaluation board for the MP6002, a monolithic Flyback/Forward DC-DC converter. The device integrates a 150V power switch and is capable of delivering up to 30W output power. The MP6002 has an internal soft-start, auto-retry, and incorporates over current, short circuit, and over-voltage protection. It can also skip cycles to maintain zero load regulation.

This device is available in an 8-pin SOIC package with an exposed pad.

$25.00
+ tax

Design Resources