MP2009
Active Part Numbers:
MP2009EE-1.8-LF-P MP2009EE-1.8-LF-Z MP2009EE-2.5-LF-P MP2009EE-2.5-LF-Z MP2009EE-4.0-LF-P MP2009EE-4.0-LF-Z MP2009EE-1.5-LF-P MP2009EE-1.5-LF-Z MP2009EE-2.6-LF-P MP2009EE-2.6-LF-Z MP2009EE-2.7-LF-P MP2009EE-2.7-LF-Z MP2009EE-2.8-LF-P MP2009EE-2.8-LF-Z MP2009EE-3.3-LF-P MP2009EE-3.3-LF-Z MP2009EE-3-LF-P MP2009EE-3-LF-Z MP2009EE-4.5-LF-P MP2009EE-4.5-LF-Z
Meaning of P & Z 
Evaluation Tools
The EV2009EE-00A evaluation board demonstrates the performance of MP2009, an ultra low noise, low dropout linear regulator. It operates from a 2V to 6V input voltage and regulates the output voltage range from 1.5V to 4.5V in 100mV increments.
The EV2009EE-00A can supply up to 120mA of load current with a typical dropout voltage of 172 mV. It provides thermal overload and current limit protection, stability with ultra low ESR ceramic capacitors as low as 1uF, and very fast transient response.
MP2009 Resources
-
DEVELOPING A MULTI-PORT FAST-CHARGE SOLUTION WITH THE HR1211The HR1211 is an integrated, multi-mode PFC and current mode LLC controller solution that was designed to meet the power requirements of the fast-charge adapter market. To achieve a simplified peripheral circuit, the HR1211 integrates a high-voltage current source, a safety-certified X-capacitor discharge circuit, and high-voltage drive circuits for PFC and LLC. In addition, a capacitor resistor i...
-
ZYNQ -7000 HIGH EFFICIENCY POWER REFERENCE DESIGN -
ZYNQ ULTRASCALE+ MPSOC DISCRETE PMIC POWER SOLUTIONThis is a power solution for AMD Xilinx Zynq UltraScale+ MPSoC’s XCZU3EG using discrete PMICs and LDOs. This solution meets the tight regulation of each rail in a small footprint.
-
ZYNQ ULTRASCALE + MPSOC PMIC MODULE POWER SOLUTIONThis is a power solution for AMD Xilinx Zynq UltraScale+ MPSoC’s XCZU3EG using PMIC modules and LDOs. This solution meets the tight regulation of each rail in a small footprint.
-
VERSAL AI EDGE (AUTOMOTIVE) FULL POWER MANAGEMENT REFERENCE DESIGN -
VERSAL AI EDGE (AUTOMOTIVE) –M, H DEVICES REFERENCE DESIGN -
ARTIX ULTRASCALE+ AU10P/15P MINIMUM RAILS – HIGHEST POWER REFERENCE DESIGN -
ZU1/2/3 MINIMUM RAILS HIGHEST POWER -
ARTIX ULTRASCALE+ AU20P/25P MINIMUM RAILS – LOWEST COST -
ARTIX ULTRASCALE+ AU10P/15P MINIMUM RAILS – SMALLEST SIZE -
ZU1/2/3 FULL POWER MANAGEMENT – SMALLEST SIZE -
SPARTAN 7 PMIC SOLUTION WITH POWER SEQUENCING FOR HIGH POWER APPLICATIONS (4-12VIN)This reference design is intended for powering AMD Xilinx Spartan7 family of FPGAs (S6 - S100). This PMIC based solution combines a small footprint with good efficiency and tight regulation for a low cost solution. The internal sequencer ensures power up and power down sequencing requirements. MP5470 PMIC has 4x bucks, Vin range 6.5V to 16V, I2C support and available in a 3x4mm QFN package. ...
-
SPARTAN 7 SMALLEST SIZE MODULE SOLUTION (HIGH POWER APPLICATIONS)This reference design is intended for powering AMD Xilinx Spartan7 family of FPGAs (S6 - S100). This PMIC Module based solution combines a small footprint with good efficiency and tight regulation for a low cost solution. The internal sequencer ensures power up and power down sequencing requirements. MPM54304 has 4x bucks, Vin range of 4V to 16V, I2C support and is available in a 7mmx7mm LGA packa...
-
VU57P ULTRASCALE+ EXTENDED PORTFOLIO SMALLEST SIZE POWER MANAGEMENT REFERENCE DESIGN -
VU57P ULTRASCALE+ EXTENDED PORTFOLIO HIGHEST SIZE POWER MANAGEMENT REFERENCE DESIGN -
ZYNQ ULTRASCALE+ MPSOC REFERENCE DESIGN FOR 3V-6V BATTERY APPLICATIONS -
ZYNQ ULTRASCALE+ MPSOC REFERENCE DESIGN FOR 6V-16V BATTERY APPLICATIONS -
ZYNQ ULTRASCALE+ MPSOC 8 RAIL DISCRETE POWER MANAGEMENT REFERENCE DESIGNThis is a scalable design for powering the AMD Xilinx Zynq UltraScale+ MPSoC family (ZU2 to ZU19). This discrete solution combines a small footprint with excellent efficiency and tight regulation. An external sequencer meets power up and power down sequencing requirements.
-
HIGH POWER SOLUTION FOR VIRTEX ULTRASCALE -
LOW TO MEDIUM POWER SOLUTION FOR VIRTEX ULTRASCALE -
SCALABLE POWER SOLUTION FOR KINTEX ULTRASCALE -
RFSOC GEN2/GEN3 REFERENCE DESIGN WITH FULL PMBUS SUPPORT -
ZYNQ7000 REFERENCE DESIGN USING PMIC MODULEThe MPS Reference design for the AMD Xilinx Zynq-7000 SoC is centered around MPM54304 Quad PMIC module with 4 outputs (3A/3A/2A/2A) and two LDO regulators to provide all power rails to Zynq SoC. MPM54304 outputs can be paralleled for design flexibility and it includes built-in power sequencing. This design can operate from a 4V-16V input supply.
-
RFSOC GEN2/GEN3 REFERENCE DESIGN USING DISCRETE REGULATORS -
RFSOC GEN2/GEN3 REFERENCE DESIGN USING MODULES
Learn about our Evaluation Kit
Log in to your account
Create New Account