- MP5410
MP5410
You have a basic account.A myMPS+ account is needed.
Upgrade to myMPS+Session textval
Session Titefor popup
Description
The MP5410 is a high efficiency, current mode step-up converter with four single-pole/double-throw (SPDT) switches designed for low-power bias supply application. The device can boost dual-cell NiCd/NiMH or single-cell Li+ battery to 10V output voltage. The MP5410 can start up from an input voltage as low as 1.8V. It uses a current limited variable frequency control algorithm to optimize efficiency and minimize external component size and cost. The internal low resistance N-Channel MOSFET switch can withstand up to 16V allowing the MP5410 to produce high output voltage with high efficiency. In addition, the MP5410 can disconnect all loads from input DC power supply. The integrated schottky diode reduces external parts to save critical board space. The MP5410 features low shutdown current allowing the part to draw less than 1µA off current in shutdown mode. And it includes input under voltage and over temperature protection. The MP5410 is available in a small 16-pin QFN 3mmx3mm package.
-
Show more
Show less
Features & Benefits
- 1.8V Low Voltage Start-Up
- 1.8V to 5.5V Input Range
- Output Disconnection
- Integrated Power MOS & Schottky Diode
- Variable Frequency Control
- <1μA Shutdown Current
- Current Mode Control with Internal Compensation
- More than 80% Efficiency at Light Load Conditions
- Tiny External Components
- Inrush Current Limiting and Internal Soft-Start
- Input UVLO
- Over Temperature Protection
- 3mmx3mm QFN16 Package
Active Part Numbers:
MP5410EQ-LF-P MP5410EQ-LF-Z
Part numbers ending in P and Z are the same parts. P and Z only indicates reel size.
Meaning of P & Z
MP5410 Resources
-
REFERENCE DESIGN
MAX 10REFERENCE DESIGN -
REFERENCE DESIGN
ARTIX ULTRASCALE+ AU20P/25P MINIMUM RAILS – SMALLEST SIZEREFERENCE DESIGN -
REFERENCE DESIGN
ARTIX ULTRASCALE+ AU20P/25P MINIMUM RAILS – LOWEST COSTREFERENCE DESIGN -
REFERENCE DESIGN
ARTIX ULTRASCALE+ AU10P/15P MINIMUM RAILS – LOWEST COSTREFERENCE DESIGN -
REFERENCE DESIGN
ZU1/2/3 FULL POWER MANAGEMENT – LOWEST COSTREFERENCE DESIGN -
REFERENCE DESIGN
ZU1/2/3 MINIMUM RAILS – LOWEST COSTREFERENCE DESIGN -
REFERENCE DESIGN
SPARTAN 7 PMIC SOLUTION WITH POWER SEQUENCING FOR HIGH POWER APPLICATIONS (4-12VIN)REFERENCE DESIGNThis reference design is intended for powering AMD Xilinx Spartan7 family of FPGAs (S6 - S100). This PMIC based solution combines a small footprint with good efficiency and tight regulation for a low cost solution. The internal sequencer ensures power up and power down sequencing requirements. MP5470 PMIC has 4x bucks, Vin range 6.5V to 16V, I2C support and available in a 3x4mm QFN package. ...
-
REFERENCE DESIGN
SPARTAN 7 PMIC SOLUTION WITH POWER SEQUENCING FOR HIGH POWER APPLICATIONS (5VIN)REFERENCE DESIGNThis reference design is intended for powering AMD Xilinx Spartan7 family of FPGAs (S6 - S100). This PMIC based solution combines a small footprint with good efficiency and tight regulation for a low cost solution. The internal sequencer ensures power up and power down sequencing requirements MP5416 PMIC with 4x bucks, 5x LDOs Vin 2.8V to 5.5V I2C support QFN-28 (4mmx4mm) Cost effective Small Foot...
-
REFERENCE DESIGN
SPARTAN 7 SMALLEST SIZE MODULE SOLUTION (HIGH POWER APPLICATIONS)REFERENCE DESIGNThis reference design is intended for powering AMD Xilinx Spartan7 family of FPGAs (S6 - S100). This PMIC Module based solution combines a small footprint with good efficiency and tight regulation for a low cost solution. The internal sequencer ensures power up and power down sequencing requirements. MPM54304 has 4x bucks, Vin range of 4V to 16V, I2C support and is available in a 7mmx7mm LGA packa...
-
REFERENCE DESIGN
WIFIREFERENCE DESIGNMPS works closely with Qualcomm to create power solutions for all their WiFi products supporting 802.11ax including WiFi6 standards with 2.4GHz/5GHz/6GHz bands The MPS components on these reference designs are carefully selected to meet price and performance objectives of these designs. Please contact your regional MPS contact or use the displayed link below for assistance
-
REFERENCE DESIGN
ARTIX 7 - PMIC REFERENCE DESIGNREFERENCE DESIGNContact MPS with exact requirements
-
REFERENCE DESIGN
ZYNQ ULTRASCALE+ RFSOC INTERNAL SEQUENCING POWER MANAGEMENT REFERENCE DESIGNREFERENCE DESIGN -
REFERENCE DESIGN
KINTEX INTERNAL SEQUENCING POWER MANAGEMENT REFERENCE DESIGNREFERENCE DESIGN -
REFERENCE DESIGN
ZYNQ ULTRASCALE+ U4EG/U5EG/U7EG ADAS CENTRAL COMPUTE ENGINE POWER REFERENCE DESIGNREFERENCE DESIGN -
REFERENCE DESIGN
ZYNQ ULTRASCALE+ MPSOC U2EG/U3EG ADAS SENSOR AND PROCESSING FOR CAMERA POWER REFERENCE DESIGNREFERENCE DESIGN -
REFERENCE DESIGN
ZYNQ ULTRASCALE+ MPSOC 5 RAIL INTERNAL SEQUENCING POWER MANAGEMENT REFERENCE DESIGNREFERENCE DESIGN
Log in to your account
Create New Account