MP5402
36V, 5A, Frequency-Selectable Step-Down Converter with Smart, Dual USB Charging Ports
Active Part Numbers:
MP5402GR-P MP5402GR-Z
Meaning of P & Z 
Evaluation Tools
EV5402-R-00A Evaluation Kit 36V, 5A, Frequency-Selectable Step-Down Converter with Smart, Dual USB Charging Ports
The EV5402-R-00A Evaluation Board is designed to demonstrate the capabilities of MPS’ MP5402. MP5402 integrates a monolithic step-down switch mode converter and two USB current limit switches with charging port identification circuit. It achieves 5A continuous output current over a wide input supply range with excellent load and line regulation.
The output of each USB switch is current limited. Both USB ports support DCP schemes for Battery Charging specification (BC1.2), the Divider Mode, and 1.2V/1.2V Mode without the need for outside user interaction.
MP5402 Resources
-
DOCKING STATIONSDocking stations offer a convenient way to plug in a laptop to common peripherals, such as DVI, COM, USB, and Ethernet — all with one connection. Typically, docking stations are made for a particular computer module, and offer different docking styles that allow a laptop computer to act like a desktop computer. With an increasing need for more peripherals and more complicated laptops, power design...
-
MAX 10 -
ARTIX ULTRASCALE+ AU20P/25P MINIMUM RAILS – SMALLEST SIZE -
ARTIX ULTRASCALE+ AU20P/25P MINIMUM RAILS – LOWEST COST -
ARTIX ULTRASCALE+ AU10P/15P MINIMUM RAILS – LOWEST COST -
ZU1/2/3 FULL POWER MANAGEMENT – LOWEST COST -
ZU1/2/3 MINIMUM RAILS – LOWEST COST -
SPARTAN 7 PMIC SOLUTION WITH POWER SEQUENCING FOR HIGH POWER APPLICATIONS (4-12VIN)This reference design is intended for powering AMD Xilinx Spartan7 family of FPGAs (S6 - S100). This PMIC based solution combines a small footprint with good efficiency and tight regulation for a low cost solution. The internal sequencer ensures power up and power down sequencing requirements. MP5470 PMIC has 4x bucks, Vin range 6.5V to 16V, I2C support and available in a 3x4mm QFN package. ...
-
SPARTAN 7 PMIC SOLUTION WITH POWER SEQUENCING FOR HIGH POWER APPLICATIONS (5VIN)This reference design is intended for powering AMD Xilinx Spartan7 family of FPGAs (S6 - S100). This PMIC based solution combines a small footprint with good efficiency and tight regulation for a low cost solution. The internal sequencer ensures power up and power down sequencing requirements MP5416 PMIC with 4x bucks, 5x LDOs Vin 2.8V to 5.5V I2C support QFN-28 (4mmx4mm) Cost effective Small Foot...
-
SPARTAN 7 SMALLEST SIZE MODULE SOLUTION (HIGH POWER APPLICATIONS)This reference design is intended for powering AMD Xilinx Spartan7 family of FPGAs (S6 - S100). This PMIC Module based solution combines a small footprint with good efficiency and tight regulation for a low cost solution. The internal sequencer ensures power up and power down sequencing requirements. MPM54304 has 4x bucks, Vin range of 4V to 16V, I2C support and is available in a 7mmx7mm LGA packa...
-
WIFIMPS works closely with Qualcomm to create power solutions for all their WiFi products supporting 802.11ax including WiFi6 standards with 2.4GHz/5GHz/6GHz bands The MPS components on these reference designs are carefully selected to meet price and performance objectives of these designs. Please contact your regional MPS contact or use the displayed link below for assistance
-
ARTIX 7 - PMIC REFERENCE DESIGNContact MPS with exact requirements
-
ZYNQ ULTRASCALE+ RFSOC INTERNAL SEQUENCING POWER MANAGEMENT REFERENCE DESIGN -
KINTEX INTERNAL SEQUENCING POWER MANAGEMENT REFERENCE DESIGN -
ZYNQ ULTRASCALE+ U4EG/U5EG/U7EG ADAS CENTRAL COMPUTE ENGINE POWER REFERENCE DESIGN -
ZYNQ ULTRASCALE+ MPSOC U2EG/U3EG ADAS SENSOR AND PROCESSING FOR CAMERA POWER REFERENCE DESIGN -
ZYNQ ULTRASCALE+ MPSOC 5 RAIL INTERNAL SEQUENCING POWER MANAGEMENT REFERENCE DESIGN -
PLANNING FOR SUDDEN POWER FAILURES WITH THE MP5515Power failures tend to cause a domino effect of disruptions, resulting in system failures and data loss, as well as damage to servers and equipment. This article describes how to use the MP5515 to protect solid-state drives (SSDs) against sudden power failure. There are three main issues if an SSD experiences a power failure: The MP5515 is an input power conditioning PMIC that provides a compact...
Learn about our Evaluation Kit
Log in to your account
Create New Account