MP1608C

MP1608C

5.5V, 6A, Synchronous Step-Down Converter with FCCM in an SOT583 Package

MPL

Datasheet

Description

MPL

Optimized Performance with MPS Inductor

The MP1608C is a monolithic, step-down switch-mode converter with built-in internal power MOSFETs. It achieves up to 6A of continuous output current (I_OUT) from a 2.4V to 5.5V input voltage (V_IN) range, with excellent load and line regulation. The output voltage (V_OUT) can be regulated to as low as 0.4V.

The constant-on-time (COT) control scheme provides fast transient response and facilitates loop stabilization. Fault protections include cycle-by-cycle current limiting and thermal shutdown. The MP1608C is well-suited for a wide range of applications, including high-performance digital signal processors (DSPs), wireless power, portable and mobile devices, and other low-power systems.

The MP1608C requires a minimal number of readily available, standard external components, and is available in an ultra-small SOT583 package.

Features & Benefits

Wide 2.4V to 5.5V Operating Input Voltage (V_IN) Range
Up to 6A Output Current (I_OUT)
15mΩ and 9mΩ Internal Power MOSFETs
Forced Continuous Conduction Mode (FCCM)
1.25MHz Switching Frequency (f_SW)
Enable (EN) Function

High Feedback Accuracy:

±0.75% at Junction Temperature (T_J) = 25°C
±1% at T_J = -40°C to +125°C

Output Discharge Function

Short-Circuit Protection (SCP) with Hiccup Mode

Power Good (PG) Indication

Available in an SOT583 Package

Optimized Performance with MPS Inductor MPL-AL4020 Series

Active Part Numbers:

MP1608CGTL-Z MP1608CGTL-P

Meaning of P & Z

Related Products

Optimized Performance with MPS Inductor

EVL1608C-TL-00A 5.5V, 6A, Synchronous Step-Down Converter with FCCM Evaluation Board

MPL

Optimized Performance with MPS Inductor

The EVL1608C-TL-00A evaluation board is designed to demonstrate the capabilities of the MP1608C, a monolithic, step-down switch-mode converter with built-in internal power MOSFETs.

The MP1608C can achieve up to 6A of continuous output current (I_OUT) from a 2.4V to 5.5V input voltage (V_IN) range, with excellent load and line regulation. The output voltage (V_OUT) can be regulated to as low as 0.4V. Constant-on-time (COT) control provides fast transient response, easy loop design, and tight output regulation.

Full protection features include over-current protection (OCP), current limiting with hiccup mode, and thermal shutdown.

The MP1608C requires a minimal number of readily available, standard external components, and is available in an ultra-small SOT583 package.

$25.00
+ tax