MAQ470

MAQ470

12-Bit, Automotive Angle Sensor with ABZ Incremental & PWM Outputs

Datasheet

Description

The MAQ470 detects the absolute angular position of a permanent magnet, typically a diametrically magnetized cylinder on a rotating shaft. Fast data acquisition and processing provide accurate angle measurement at speeds from 0rpm to 60,000rpm.

The MAQ470 supports a wide range of magnetic field strengths and spatial configurations. Both end-of-shaft and off-axis (side-shaft mounting) configurations are supported. The device features magnetic field strength detection with programmable thresholds to allow sensing of the magnet position relative to the sensor for creation of functions such as the sensing of axial movements or for diagnostics.

On-chip, non-volatile memory provides storage for configuration parameters, including the reference zero angle position, ABZ encoder settings, and magnetic field detection thresholds.

Features & Benefits

12-Bit Resolution Absolute Angle Encoder
Contactless Sensing for Long Life
Simple and Robust Design
SPI Serial Interface with Parity Bit for Angle Readout and Chip Configuration
Configuration Programmable Magnetic Field Strength Detection for Diagnostic Checks
Incremental 10-Bit ABZ Quadrature Encoder Interface with Programmable Pulses per Turn from 1-256
PWM Output 12-Bit
3.3V, 12mA Supply
-40°C to +150°C Operating Temperature
Available in a QFN-16 (3mmx3mm) Package with Wettable Flanks
AEC-Q100 Qualified

Active Part Numbers:

MAQ470GQE-AEC1-Z MAQ470GQE-AEC1-P

Meaning of P & Z

Related Products

TBMAQ470-Q-LT-01A Long Evaluation Board for the MAQ470

The TBMAQ470-Q-LT-01A is the long evaluation board for the MAQ470 MagAlpha magnetic position sensor. The sensor is mounted to the edge of the board for side-shaft and end-of-shaft configurations.

It requires the EVKT-MACOM communication kit and the Macom App Software to evaluate MagAlpha functionality and performance with the set-up, such as noise level, refresh rate, start-up time, and magnetic field dependence.

In addition to this long (LT) evaluation board, there is a round (RD) version, in which the sensor is mounted in the center of the board for end-of-shaft configurations.

$10.50
+ tax

TBMAQ470-Q-RD-01A

Round Evalulation Board for the MAQ470

MagAlpha Evaluation App

Graphical User Interface for All Magnetic Angle Sensors

EVKT-MagAlpha-MagDiff

The EVKT-MagAlpha-MagDiff is a MagAlpha communication kit that connects to the sensor test boards (TMBA) and rotary knob kit, and requires Macom App Software.