MA710

MA710

12-Bit, Digital, Contactless Angle Sensor with ABZ Incremental & PWM Outputs

Datasheet

Description

The MA710 detects the absolute angular position of a permanent magnet, typically a diametrically magnetized cylinder on a rotating shaft. Fast data acquisition and processing provide accurate angle measurement at speeds from 0 to 60,000 rpm.

The MA710 is particularly suitable for low magnetic field applications: side-shaft configuration or the use of non-rare earth magnets.

The MA710 features magnetic field strength detection with programmable thresholds to allow sensing of the magnet position relative to the sensor for creation of functions such as the sensing of axial movements or for diagnostics.

On-chip non-volatile memory provides storage for configuration parameters, including the reference zero angle position, ABZ encoder settings, and magnetic field detection thresholds.

Features & Benefits

12-Bit Resolution Absolute Angle Encoder
15mT Minimum Magnetic Field
Contactless Sensing for Long Life
SPI Serial Interface for Digital Angle Readout and Chip Configuration
Incremental 10-Bit ABZ Quadrature Encoder Interface with Programmable Pulses Per Turn from 1-256
PWM Output 12-Bit
Programmable Magnetic Field Strength Detection for Diagnostic Checks
3.3V, 12mA Supply
-40°C to +125°C Operating Temperature
Available in a QFN-16 (3mmx3mm) Package

Active Part Numbers:

MA710GQ-P MA710GQ-Z

Meaning of P & Z

Related Products

TBMA710-Q-LT-01A Long Evaluation Board for the MA710

The TBMA710-Q-LT-01A is the long evaluation board for the MA710 MagAlpha magnetic position sensor. The sensor is mounted on the edge of the board, and can therefore be used in both side-shaft and end-of-shaft configurations.

It requires the EVKT-MACOM communication kit and the Macom App Software to evaluate MagAlpha functionality and performance with the set-up, such as noise level, refresh rate, start-up time, and magnetic field dependence.

In addition to this long (LT) evaluation board, there is a round format (RD) version, in which the sensor is mounted in the center of the board for end-of-shaft configurations.

$10.75
+ tax

TBMA710-Q-RD-01A

Round Evaluation Board for the MA710

MagAlpha Evaluation App

Graphical User Interface for All Magnetic Angle Sensors

EVKT-MagAlpha-MagDiff

The EVKT-MagAlpha-MagDiff is a MagAlpha communication kit that connects to the sensor test boards (TMBA) and rotary knob kit, and requires Macom App Software.