The MP4572 is a fully-integrated, fixedfrequency synchronous step-down converter. It can achieve up to 2A continuous output current with peak current control for excellent transient response.
The wide 4.5V to 60V input voltage range accommodates a variety of step down applications in automotive input environment. And 2μA shutdown mode quiescent current allows use in battery-powered applications.
The MP4572 integrates internal high-side and low-side power MOSFETs for high efficiency without an external schottky diode and is available in a 12-pin QFN package. With internal compensation, the MP4572 can offer a very compact solution with a minimum number of readily available standard external components.
The MP4572 employs AAM (Advanced Asynchronous Modulation) mode which helps achieve high efficiency during light load by scaling down the frequency to reduce the switching and gate driver losses.
The MP4572 offers standard features, including built-in soft-start, enable control and power good indicator. High-duty cycle and low drop-out mode are provided for the automotive cold crank condition. In addition, the chip provides over-current protection with valley current detection which is used to avoid current running away. Also it has hiccup short-circuit protection, input under-voltage lockout and auto recovery thermal protection.
Show moreShow less
Log in to your account
Create New Account
Log in to continue
A Plus account is required to perform this action.
Log in to your myMPS+ account or create one now.
Don’t have a myMPS+ account yet?
Get early access to new products, datasheets, and free samples.