OrderMP2013
Active Part Numbers:
MP2013GG-P MP2013GG-Z MP2013GQ-33-Z MP2013GQ-P MP2013GQ-Z MP2013GJ-P MP2013GJ-Z MP2013XR
Meaning of P & Z 
Evaluation Tools
The EVQ2013-J_Q_G-00A is an evaluation board for the MPQ2013, a low linear regulator that supplies power to systems with high voltage batteries.
MPQ2013 includes a wide 2.5V to 40V input range, low dropout voltage and low quiescent supply current. The low quiescent current and low dropout voltage allow operations at extremely low power levels. Therefore, the MPQ2013 are ideal for the low power microcontrollers and the battery-powered equipments.
The EVQ2013-J_Q_G-00A is a fully assembled and tested evaluation board. It generates a +5V output voltage at load current up to 150mA from a 6V to 40V input range.
MP2013 Resources
-
ZYNQ ULTRASCALE+ MPSOC DISCRETE PMIC POWER SOLUTIONThis is a power solution for AMD Xilinx Zynq UltraScale+ MPSoC’s XCZU3EG using discrete PMICs and LDOs. This solution meets the tight regulation of each rail in a small footprint.
-
ZYNQ ULTRASCALE + MPSOC PMIC MODULE POWER SOLUTIONThis is a power solution for AMD Xilinx Zynq UltraScale+ MPSoC’s XCZU3EG using PMIC modules and LDOs. This solution meets the tight regulation of each rail in a small footprint.
-
VERSAL AI EDGE (AUTOMOTIVE) FULL POWER MANAGEMENT REFERENCE DESIGN -
VERSAL AI EDGE (AUTOMOTIVE) –M, H DEVICES REFERENCE DESIGN -
ARTIX ULTRASCALE+ AU10P/15P MINIMUM RAILS – HIGHEST POWER REFERENCE DESIGN -
ZU1/2/3 MINIMUM RAILS HIGHEST POWER -
ARTIX ULTRASCALE+ AU20P/25P MINIMUM RAILS – LOWEST COST -
ARTIX ULTRASCALE+ AU10P/15P MINIMUM RAILS – SMALLEST SIZE -
ZU1/2/3 FULL POWER MANAGEMENT – SMALLEST SIZE -
SPARTAN 7 PMIC SOLUTION WITH POWER SEQUENCING FOR HIGH POWER APPLICATIONS (4-12VIN)This reference design is intended for powering AMD Xilinx Spartan7 family of FPGAs (S6 - S100). This PMIC based solution combines a small footprint with good efficiency and tight regulation for a low cost solution. The internal sequencer ensures power up and power down sequencing requirements. MP5470 PMIC has 4x bucks, Vin range 6.5V to 16V, I2C support and available in a 3x4mm QFN package. ...
-
SPARTAN 7 SMALLEST SIZE MODULE SOLUTION (HIGH POWER APPLICATIONS)This reference design is intended for powering AMD Xilinx Spartan7 family of FPGAs (S6 - S100). This PMIC Module based solution combines a small footprint with good efficiency and tight regulation for a low cost solution. The internal sequencer ensures power up and power down sequencing requirements. MPM54304 has 4x bucks, Vin range of 4V to 16V, I2C support and is available in a 7mmx7mm LGA packa...
-
VU57P ULTRASCALE+ EXTENDED PORTFOLIO SMALLEST SIZE POWER MANAGEMENT REFERENCE DESIGN -
VU57P ULTRASCALE+ EXTENDED PORTFOLIO HIGHEST SIZE POWER MANAGEMENT REFERENCE DESIGN -
ZYNQ ULTRASCALE+ MPSOC REFERENCE DESIGN FOR 3V-6V BATTERY APPLICATIONS -
ZYNQ ULTRASCALE+ MPSOC REFERENCE DESIGN FOR 6V-16V BATTERY APPLICATIONS -
ZYNQ ULTRASCALE+ MPSOC 8 RAIL DISCRETE POWER MANAGEMENT REFERENCE DESIGNThis is a scalable design for powering the AMD Xilinx Zynq UltraScale+ MPSoC family (ZU2 to ZU19). This discrete solution combines a small footprint with excellent efficiency and tight regulation. An external sequencer meets power up and power down sequencing requirements.
-
HIGH POWER SOLUTION FOR VIRTEX ULTRASCALE -
LOW TO MEDIUM POWER SOLUTION FOR VIRTEX ULTRASCALE -
SCALABLE POWER SOLUTION FOR KINTEX ULTRASCALE -
RFSOC GEN2/GEN3 REFERENCE DESIGN WITH FULL PMBUS SUPPORT -
ZYNQ7000 REFERENCE DESIGN USING PMIC MODULEThe MPS Reference design for the AMD Xilinx Zynq-7000 SoC is centered around MPM54304 Quad PMIC module with 4 outputs (3A/3A/2A/2A) and two LDO regulators to provide all power rails to Zynq SoC. MPM54304 outputs can be paralleled for design flexibility and it includes built-in power sequencing. This design can operate from a 4V-16V input supply.
-
RFSOC GEN2/GEN3 REFERENCE DESIGN USING DISCRETE REGULATORS -
RFSOC GEN2/GEN3 REFERENCE DESIGN USING MODULES -
IOTMPS works closely with Qualcomm to create power solutions for their IoT products supporting 802.11a/b/g and 802.15.4 standards The MPS components on these reference designs are carefully selected to meet price and performance objectives of these designs. Please contact your regional MPS contact or use the displayed link below for assistance
-
WIFIMPS works closely with Qualcomm to create power solutions for all their WiFi products supporting 802.11ax including WiFi6 standards with 2.4GHz/5GHz/6GHz bands The MPS components on these reference designs are carefully selected to meet price and performance objectives of these designs. Please contact your regional MPS contact or use the displayed link below for assistance
Learn about our Evaluation Kit
Log in to your account
Create New Account