Molded Inductors
Session textval
Session Titefor popup
This series includes molded magnetic-shielded power inductors that offer soft saturation due to their molded design, delivering a stable high-temperature behavior. Their molded construction decreases the audible noise generated from alternating currents and pulse wave frequencies.
Inductor Selector Tool
Molded Optimized for MPS DC DC Content
-
REFERENCE DESIGN
VERSAL PREMIUM GEN2 (FULL POWER MANAGEMENT) - MPS SOLUTIONREFERENCE DESIGN -
REFERENCE DESIGN
VERSAL PREMIUM GEN2 (MINIMUM RAILS CONSOLIDATION) - HREFERENCE DESIGN -
REFERENCE DESIGN
VERSAL PREMIUM GEN2 (MINIMUM RAILS CONSOLIDATION) -M PS OVERDRIVE (0.88V)REFERENCE DESIGN -
REFERENCE DESIGN
VERSAL PREMIUM GEN2 (MINIMUM RAILS CONSOLIDATION) -MREFERENCE DESIGN -
REFERENCE DESIGN
VERSAL PREMIUM GEN2 (MINIMUM RAILS CONSOLIDATION) -L PS OVERDRIVE (0.88V)REFERENCE DESIGN -
REFERENCE DESIGN
VERSAL PREMIUM GEN2 (MINIMUM RAILS CONSOLIDATION) - L PS OVERDRIVE (0.8V)REFERENCE DESIGN -
REFERENCE DESIGN
VERSAL PREMIUM GEN2 (MINIMUM RAILS CONSOLIDATION) - LREFERENCE DESIGN -
REFERENCE DESIGN
VERSAL PREMIUM GEN2 REFERENCE DESIGNSREFERENCE DESIGNUpload your AMD XPE file for design assistance
-
ARTICLE
AN EQUATION-DRIVEN GUIDE TO DESIGNING A CRM/DCM BOOST PFCARTICLEDesigning compact and efficient power factor correction (PFC) stages for low-power to mid-power applications often requires operating in critical conduction mode (CrM) or discontinuous conduction mode (DCM). These modes offer improved efficiency and simplified control at light loads, but require careful design to ensure correct valley detection and mode transitions across the entire input range an...
-
VIDEO
WEBINAR - INSIDE AUTOMOTIVE DMS & OMSVIDEOExplore DMS/OMS fundamentals, focusing on typical system architecture, camera power architecture, and the use of MPS IR LED drivers to manage high peak currents and thermal performance in automotive imaging systems. The webinar also covers camera placement and the evolution of the smart cockpit. Key takeaways include: System & Power Architecture: Master the complete system and power architect...
-
ARTICLE
THE THEORY OF PARASITIC MILLER TURN-ON AND DRIVING TECHNIQUES FOR SIC MOSFETS AND CASCODESARTICLETo address the constant challenges that accompany increasing a power converter’s power density, switching frequency (fSW), and efficiency, it is vital that designers can switch power transistors quickly and safely. These needs have made wide-bandgap power semiconductors like silicon carbide (SiC) MOSFETs and cascodes more popular than silicon counterparts; however, these devices also work at much ...
-
ARTICLE
PRACTICAL DESIGN OF A MULTI-OUTPUT FLYBACK CONVERTER WITH IMPROVED CROSS-REGULATIONARTICLEA stacked-output topology, combined with a weighted feedback network, improves cross-regulation in multi-output flyback converters. This approach allows the main regulated output and the stacked auxiliary output to both contribute to the feedback loop, reducing the voltage deviation typically observed in semi-regulated flyback outputs. This article applies that methodology to a complete offline...
Log in to your account
Create New Account