MP8719

MP8719

26V, 12A, Low I_Q, High-Current, Synchronous Buck Converter with ±A LDO and Buffered Reference

Datasheet

Description

The MP8719 provides a complete power supply with the highest power density for DDR3, DDR3L, LPDDR3, and DDR4 memory. The MP8719 integrates a high-frequency, synchronous, rectified, step-down, switch-mode converter (VDDQ) with a 1A sink/source LDO (VTT) and buffered low-noise reference (VTTREF).
The MP8719 operates at high efficiency over a wide output current load range based on MPS’s proprietary switching loss reduction technology and internal low RDS(ON) power MOSFETs.
Adaptive constant-on-time (COT) control mode provides fast transient response and eases loop stabilization. The DC auto-tune loop provides good load and line regulation.
The VTT LDO provides 1A of sink/source current capability and requires only a 22μF ceramic capacitor. The VTTREF tracks VDDQ/2 with excellent 1% accuracy.
Full protection features include over-current (OC) limit, over-voltage protection (OVP), under-voltage protection (UVP), over-temperature warning (OTW), and thermal shutdown.
The MP8719 requires a minimal number of external components and is available in a QFN-16 (3mmx3mm) package.

Features & Benefits

Wide 4.5V to 26V Operating Input Range
135μA Low Quiescent Current
12A Continous Output Current
13A Peak Output Current
Selectable Ultrasonic Mode (USM)
Selectable 500kHz/700kHz Switching Frequency
Built-In ±1A VTTLDO
1% Buffered VTTREF Output
Adaptive COT for Fast Transient
DC Auto-Tune Loop
Stable with POSCAP and Ceramic Output Capacitors
Over-Temperature Warning (OTW)
Internal Soft Start (SS)
Output Discharge
OCL, OVP, UVP, and Thermal Shutdown
Latch-Off Reset via EN or Power Cycle
Available in a QFN-16 (3mmx3mm) Package

Active Part Numbers:

MP8719GQ-P MP8719GQ-Z

Meaning of P & Z

Related Products

EV8719-Q-00A 26V, Low I_Q, High Current Synchronous Buck Converter with +/-1A and Bufferd Refference Evaluation Board

The EV8719-Q-00A is the evaluation board for MP8719. The MP8719 provides a complete power supply for DDR3, DDR3L, LPDDR3, and DDR4 memory with the highest power density. It integrates a high frequency synchronous rectified step-down switch mode converter (VDDQ) with a 1A sink/source LDO (VTT) and buffered low noise reference (VTTREF).

Adaptive Constant-On-Time (COT) control mode provides fast transient response and eases loop stabilization. The DC auto tune loop provides good load and line regulation.

The VTT LDO provides 1A sink/source current capability and requires only 22uF ceramic capacitance. The VTTREF tracks VDDQ/2 with an excellent 1% accuracy.

Full protection features include OC Limit, OVP, UVP and thermal shut down and Over temperature warning (OTW).

The converter requires minimum number of external components and is available in QFN 3x3 packages.

$25.00
+ tax